Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
 
Session Overview
Session
MS-15: Integrative methodologies for novel thin film structures
Time:
Sunday, 15/Aug/2021:
3:45pm - 5:15pm

Session Chair: David Babonneau
Session Chair: Baerbel Krause
Location: 223-4

60 2nd floor

Invited: Jolien Dendooven (Belgium), Byeongdu Lee (USA)


Session Abstract

This MS will focus on creative strategies for the development and encompassing characterization of novel thin film structures. This combines structural and application-relevant aspects, and includes, e.g., complementary in situ and real-time characterization during deposition and processing (e.g. by surface-sensitive x-ray, neutron, or electron scattering and spectroscopy methods), and efficient screening approaches for large material libraries.


For all abstracts of the session as prepared for Acta Crystallographica see PDF in Introduction, or individual abstracts below.


Introduction
Show help for 'Increase or decrease the abstract text size'
Presentations
3:45pm - 3:50pm

Introduction to session

David Babonneau, Baerbel Krause



3:50pm - 4:20pm

In situ study of noble metal atomic layer deposition processes using grazing incidence small angle X-ray scattering

Jolien Dendooven1, Eduardo Solano1,2, Ji-Yu Feng1, Ranjith K. Ramachandran1, Matthias M. Minjauw1, Michiel Van Daele1, Alessandro Coati3, Daniel Hermida-Merino4, Christophe Detavernier1

1Ghent University, Dept. of Solid State Sciences, COCOON Group, Krijgslaan 281/S1, 9000 Gent, Belgium; 2ALBA Synchrotron Light Source, SWEET-NCD Beamline, Carrer de la Llum 2-26, 08290 Cerdanyola del Vallès, Spain; 3Synchrotron SOLEIL, SixS Beamline, L’Orme des Merisiers, Saint-Aubin, BP48, 91192 Gif-sur-Yvette, France; 4ESRF European Synchrotron, DUBBLE Beamline BM26, Avenue des Martyrs, CS40220, 38043 Grenoble, France

Metal nanocatalysts typically consist of noble metal nanoparticles (NPs) anchored on a metal oxide support, where the NP surface exposes active sites to catalyse target chemical reactions. The catalyst’s economic viability demands high activity, high selectivity, and high stability. It is well established that the performance of catalytic NPs is closely related to their size, shape and interparticle distance. Synthesis methods that can tailor the structural properties of noble metal NPs are therefore attractive to elucidate performance-structure relationships. In this regard, there is an increasing interest in Atomic Layer Deposition (ALD), a vapour-phase deposition method which proved its efficiency in dispersing noble metal NPs on complex high surface area supports with atomic-scale control over the metal loading (atoms per cm2) and nanoparticle size [1]. However, an improved understanding of how the deposition parameters influence the formation and growth of the noble metal NPs is required to fully exploit the tuning potential of ALD.

We designed a high-vacuum setup for thermal and plasma-enhanced ALD that is compatible with synchrotron-based in situ X-ray fluorescence (XRF) and grazing incidence small-angle X-ray scattering (GISAXS) monitoring [2]. Using this setup, we resolved the dynamics of Pt and Pd NP formation and growth on planar SiO2 and Al2O3 surfaces [3-5]. In situ XRF was used to quantify the evolution of metal loading with the number of ALD cycles, while analysis of the key scattering features allowed us to correlate the amount of deposited material with the evolution of structural parameters such as cluster shape, average size and areal density.

In a first study we focused on the growth of Pt deposits on SiO2 with the thermal ALD process comprising sequential MeCpPtMe3 and O2 exposures at 300°C [3]. The results indicated a nucleation stage, followed by a diffusion-mediated particle growth regime during which the size and spacing of the Pt NPs is largely determined by adsorption of migrating Pt species on the surface and diffusion-driven particle coalescence. Interestingly, diffusion phenomena and ripening of the Pt NPs during ALD could be suppressed by using N2 plasma as a reactant instead of O2 in the ALD cycle. By combining O2-based and N2 plasma-based ALD processes, we developed a tuning strategy that offers independent control over the Pt NP size and areal density [4].

Secondly, we studied the initial nucleation of Pd NPs deposited at 150°C on oxide substrates (SiO2 or Al2O3) by combining Pd(hfac)2 and H2 plasma in an ALD sequence [5]. The results confirmed a long nucleation process and revealed a relatively low NP areal density, in line with the occurrence of surface poisoning during the initial ALD cycles [6]. The reaction of the Pd precursor with the oxide surface leaves site blocking surface species behind, thereby inhibiting the nucleation. To enhance the nucleation, we explored two potential methods to ‘clean’ the surface: (1) introducing trimethylaluminum (TMA) exposures during the initial ALD cycles, and (2) introducing an O2 plasma exposure, either before or after the H2 plasma step, throughout the ALD process. Both these approaches had a significant impact on the evolution of NP size and spacing, and the insights obtained were used to develop a strategy that enables precise control of the Pd NP dimensions and coverage [5].

[1] Lu, J., Elam, J. W. & Stair, P. C. (2016). Surf. Sci. Rep. 71, 410.

[2] Dendooven, J., Solano, E., Minjauw, M. M., Van de Kerckhove, K., Coati, A., Fonda, E., Portale, G., Garreau, Y. & Detavernier, C. (2016). Rev. Sci. Instrum. 87, 113905.

[3] Dendooven, J., Van Daele, M., Solano, E., Ramachandran, R. K., Minjauw, M. M., Resta, A., Vlad, A., Garreau, Y. Coati, A., Portale, G. & Detavernier, C. (2020). Phys. Chem. Chem. Phys. 22, 24917.

[4] Dendooven, J., Ramachandran, R. K., Solano, E., Kurttepeli, M., Geerts, L., Heremans, G., Rongé, J., Minjauw, M. M., Dobbelaere, T., Devloo-Casier, K., Martens, J. A., Vantomme, A., Bals, S., Portale, G., Coati, A. & Detavernier, C. (2017). Nat. Commun. 8, 1074.

[5] Feng, J.-Y., Ramachandran, R. K., Solano, E., Minjauw, M. M., Van Daele, M., Vantomme, A., Hermida-Merino, D., Coatia, A., Poelman, H., Detavernier, C. & Dendooven, J. (2021). Appl. Surf. Sci. 539, 148238.

[6] Goldstein, D. N. & George, S. M. (2011). Thin Solid Films 519, 5339.

External Resource:
Video Link


4:20pm - 4:50pm

Symmetry-breaking in double gyroid block copolymer film

Seungyun Jo1, Haedong Park2, Taesuk Jun1, Kwangjin Kim2, Hyunsoo Jung1, Sungmin Park3, Byeongdu Lee4, Seungwoo Lee2,5, Du Yeol Ryu1

1Department of Chemical and Biomolecular Engineering, Yonsei University, Republic of Korea; 2KU-KIST Graduate School of Converging Science and Technology, Korea University, Republic of Korea; 3Advanced Materials Division, Korea Research Institute of Chemical Technology, Republic of Korea; 4Argonne National Laboratory, Lemont, United States of America; 5Department of Integrative Energy Engineering, Department of Biomicrosystem Technology, and KU Photonics Center, Korea University, Republic of Korea

Soft-matter bicontinuous networks find a double gyroid structure from block copolymer (BCP) self-assembly. A gyroid structure composed of dissimilar blocks has proven its potential as a soft crystal, of which the lattice dimension is variable with molecular weight of the polymer. Using an asymmetric polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA), recently we showed that the self-assembled gyroid films formed via a solvent vapor annealing (SVA) process undergo unique structural distortion due to directional deformation immediately upon deswelling [1]. During the SVA process with PS-b-PMMA films, initially transient cylinders developed from the as-cast morphology transform into a cubic gyroid structure in a swollen state. We then observed that upon solvent evaporation the gyroid lattice contracts along the film normal direction while retaining the swollen lateral dimension. The degree of contraction is turned out to be related to the evaporation speed. Rapid and spontaneous deswelling processes lead to triclinic gyroid structures with z-directional contraction ratios (Cz) of 2.5 and 2.0, respectively.

Our X-ray analysis reveals that symmetries of the resulting gyroid structures are partially broken due to the non-affine transformation, eliciting several forbidden reflections such as {110} and {200} reflections. For further characterization of the symmetry-breaking, we delineate the structural features of noncubic gyroid films by computing electron-density difference maps from grazing incidence small angle X-ray scattering (GISAXS) data. We employed iterative phase retrieval method to solve the phase problem. Level-set approach is accordingly developed to quantitate the structural characteristics of the maps in terms of inversion symmetry-breaking, suggesting its possible application to optical Weyl photonic crystals. This presentation will focus on X-ray data collection and analysis.

[1] Jo, S., Park, H., Jun, T., Kim, K., Jung, H., Park, S., Lee, B., Lee, S., Ryu, D. Y. (2021), Applied Materials Today 23, 101006.

GISAXS measurements were performed at Pohang Accelerator Laboratory (Korea) and Advanced Photon Source (APS) at Argonne National Laboratory (US). The APS is supported by the US department of Energy, Office of Basic Energy Sciences, under contract no. DE-AC0206CH11357. This research was supported by Samsung Research Funding & Incubation Center of Samsung Electronics under Project Number SRFC-MA1801-04.

External Resource:
Video Link


4:50pm - 5:10pm

Growth studies of thin films with total scattering in real time

Martin Roelsgaard1, Ann-Christin Dippel2, Bo Brummerstedt Iversen1

1Department of Chemistry & iNANO, Aarhus University, Aarhus C, Denmark; 2PETRA III, Deutsches Elektronen-Synchrotron (DESY), Hamburg, Germany

Thin films of thickness 100 nm or less are typically deposited on a much thicker substrate, making it difficult to obtain the required high-quality total scattering data for analysis in real-space with pair distribution functions (PDF) [1]. In recent years, total scattering in reflection geometry at grazing incidence (GI), that is, below the critical angle of total external reflection, has been used with success to increase the surface sensitivity and scattering intensity [2, 3]. GI-PDF gives high-quality PDFs from films as thin as 3 nm with a 20 x 2.5 µm2 focused X-ray beam with 100 keV photon energies at PETRA III [2]. Using this same setup we have developed a novel ultra-high vacuum compatible deposition chamber, that allows for the demanding sample alignment of the thin film sample under vacuum conditions as well as a 180 degree in-plane rotation [4]. Via a rotary feedthrough and bellows combination the surrounding vacuum chamber is not affected by translation of the sample, allowing for film deposition equipment such as a magnetron sputter source. This has been employed at the P07-EH2 beamline with a radio-frequency magnetron sputter source, as pictured in the figure below. We will show how this has been applied to observe the formation of thin films during the initial stages of deposition in real time with sub-second time resolution.

[Fig 1 with figure + picture]

Figure 1. PDFs of a Pt thin film at 10, 20, 30, 40, 50 and 60 seconds of sputter deposition with approximately 1 Å/s and a picture of the equipment installed on the surface diffractometer at beamline P07-EH2, PETRA III, Hamburg, Germany, as seen from the detector side.

[1] K. M. Ø. Jensen et al., IUCrJ 2 (2015), 481

[2] A.-C. Dippel et al., IUCrJ 6 (2019), 291

[3] K. Stone et al., APL Materials 4 (2016), 076103

[4] M. Roelsgaard et al., IUCrJ 6 (2019), 299

External Resource:
Video Link