JavaScript is Disabled
Your browser's JavaScript functionality is disabled. It has to be enabled to use this function of ConfTool.
Here you can find information on how to enable JavaScript
If you have any problems, please contact the organizers at iccb2023@tuwien.ac.at.

Index of Authors

A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding surname. Select the presentation in the right-hand column to access session and presentation details.

List by Initial Letter: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z Š All Authors

List Options: Authors and Sessions · Authors and Sessions (Short Titles) · Authors and Presentations

Author(s)	Organization(s)	Contribution Title
Abbasi, Mehdi	Université Grenoble Alpes, France	The effect of glycocalyx alteration on red blood cells aggregation
Adachi, Taiji	Kyoto University, Japan	In silico experiments on the role of osteocyte mechanosensing and communication in bone adaptation and damage repair Presenter
Adamczyk, Wojciech P.	Silesian University of Technology, Poland	Estimation of material parameters of the arterial wall through inverse modeling with a 1D model of the artery CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient
Aggarwal, Ankush	University of Glasgow, United Kingdom	Biomechanical analysis of aortic roots: differences between tricuspid and bicuspid aortic valve patients Presenter
Aigner, Philipp	Medical University of Vienna, Austria	Fluid-structure-interaction simulation of bioprosthetic aortic valve using an anisotropic hyperelastic leaflet material model
Alessandri, Kévin	Treefrog Therapeutics, France	Quantitative cell-based model predicts mechanical stress response of growing tumor spheroids over several growth conditions and cell lines
Alexiou, Christoph	Universitätsklinikum Erlangen, Germany	Computational modelling of magnetic nanoparticle-mediated drug delivery in a multiphase porous media tumour model
Alloisio, Marta	KTH Royal Institute of Technology, Sweden	Symmetry-constraint Compact Tension test for mechanical fracture characterisation of biological soft tissue Presenter
Alves, Jorge Lino	Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal; University of Porto, Portugal	Optimal unit cell design using neural networks and multiscale techniques
Amaro, A. M.	University of Coimbra, Portugal	A structural numerical simulation preliminary study of a left atrial appendage Presenter
Andersen, Thomas Levin	University of Southern Denmark, Denmark; Aarhus University, Denmark	Cellular organization and interplay of human bone remodeling events Presenter
Anic, Milos	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries
Antico, Maria	Australian e-Health Research Centre, CSIRO, Australia	Study of effects of bone turnover and mineralisation kinetics on BMDD through a discrete statistical bone remodelling model
Aparici, Alejandro	Universidad de Zaragoza, Spain	Mechanical properties and constitutive modelling of deep fascia Presenter
Appali, Revathi	University of Rostock, Germany	Numerical simulation of electro-stimulative bone implants - a multiscale perspective
Araújo Barbosa, Maria Inês	Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial (INEGI), Portugal	A new numerical algorithm to simulate angiogenesis during tumour growth Presenter
Arnold, Emily L	Cranfield University, United Kingdom	The long way round: from applications to fundamental features of apatites
Arsic, Branko	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries
Atwell, Scott	Aix Marseille Univ, CNRS, CINAM, France	Red cell movement as a clinical mechanical marker in sickle cell disease
Augustin, Christoph M	Medical University of Graz, Austria; BioTechMed Graz, Austria	Physiologically valid models of cardiac electromechanics with clinical applications Presenter
Auinger, Daniel	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Avci, Okan	Fraunhofer IPA, Germany	Development and simulation of a detailed modelling human leg – application in in silico orthopedics Presenter
Avril, Stéphane	Mines Saint-Etienne, France; Ecole des Mines de Saint-Etienne, France	A computational model of the intracellular interactions after acto-myosin activation A continuum mechanics approach to assess the tensile properties of lamin rods Presenter Homeostatic, stress-driven, isotropic growth in soft tissues: a hypoelastic micromechanical framework Simple approach for ultrasound-based AAA stiffness estimation including the effects of surrounding tissues and probe pressure
Ayensa-Jiménez, Jacobo	University of Zaragoza, Spain; Aragon Institute of Engineering Research (I3A), Spain; Aragon Institute of Health Research (IIS Aragón), Spain	A continuum mathematical framework for cell phenotypic plasticity using internal variables: simulating glioblastoma adaptation to hypoxia
Badens, Catherine	Aix Marseille Univ, INSERM, MMG, Marseille, France ; APHM Service de Génétique Médicale, Centre de référence pour la Drépanocytose, les Thalassémies et les maladies constitutives du Globule Rouge et de l'Erythropoïèse, Hôpital de la Timone, Marseille, France	Red cell movement as a clinical mechanical marker in sickle cell disease
Bain, Connor	Heriot Watt University, United Kingdom	Global and local strain properties of skin during wound healing
Baláž, Peter	Charles University in Prague, Czech Republic	Mechanical properties of venous aneurysmatic tissue
Barakat, Abdul	École Polytechnique, France	A computational model of chemically and mechanically induced platelet plug formation Cellular responses to substrate topography: opportunities for computational modeling Presenter
Barberi, Luca	University of Geneva, Switzerland	Isolated structures in the actin cortex: a theory of solitude Presenter
Barrasa-Fano, Jorge	KU Leuven, Belgium	Automatic segmentation of 3D cell volumes based on 2D U-Net convolutional neural network
Beckett, Sophie	Cranfield University, United Kingdom	The long way round: from applications to fundamental features of apatites
Behr, Marek	RWTH Aachen University, Germany	A coupled multiphysics approach for modeling in-stent restenosis
Belinha, Jorge	Polytechnic of Porto, Portugal	Optimal unit cell design using neural networks and multiscale techniques
Belpaire, Tom	KU Leuven, Belgium	Modeling bacterial biofilm architecture in function of extracellular matrix production Presenter
Ben Tahar, Soha	Northeastern University, United States of America	Turing patterns as a model for predicting morphogen expression in joint formation Turing patterns in growing three-dimensional domains Presenter
Ben Zion, Matan Yah	Tel Aviv University, Israel	Structural states and Hamiltonian conservation laws in biological active flows
Benca, Emir	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications Presenter
Benolic, Leo	Research and Development Center for Bioengineering BioIRC, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Bernit, Emmanuelle	APHM, Service de médecine Interne, Hôpital de la Timone, France. Centre de référence Antilles-Guyane pour la Drépanocytose, les Thalassémies et les maladies constitutives du Globule Rouge et de l'Erythropoïèse, CHU Guadeloupe, France	Red cell movement as a clinical mechanical marker in sickle cell disease
Beyer, Benoît	Université Libre de Bruxelles, Belgium	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Bhattacharya, Pinaki	University of Sheffield, UK	Development of a novel stochastic finite element solver to predict variation in bone mechanics considering the uncertain bone mineral density
Bialecki, Ryszard A.	Silesian University of Technology, Poland	CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient
Białecki, Ryszard	SUT, Poland; Silesian University of Technology, Poland	Application of the Kalman filter for estimation of material parameters of arteries Estimation of material parameters of the arterial wall through inverse modeling with a 1D model of the artery
Biancolini, Marco Evangelos	University of Rome Tor Vergata, Italy	Simple approach for ultrasound-based AAA stiffness estimation including the effects of surrounding tissues and probe pressure
Borau, Carlos	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications
Borys, Damian	Silesian University of Technology, Poland	CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient
Boyde, Alan	DPSU, QMUL, UK	Studies of Melbourne bones, and the shape and size of voxels in LM, CSLM, XMT and SEM: cross-correlative microscopies Presenter
Bracco, Marta Irene	Ecole des Mines de Saint-Etienne, France; Philips Research, Paris, France	Simple approach for ultrasound-based AAA stiffness estimation including the effects of surrounding tissues and probe pressure Presenter
Brandão, Sofia	Escola Superior de Saúde do Vale do Ave, Portugal	Determining in vivo biomechanical properties of the bladder in patients with and without urinary incontinence
Brigham, John C.	University of Pittsburgh, USA	A novel computationally efficient approach to evaluate mechanical properties of soft tissues from clinical imaging data Presenter
Bromage, Timothy	New York University, United States of America	Scaling of osteocyte lacuna density and its implications for the tissue-specific metabolic rate of bone Presenter
Burgkart, Rainer	Technical University of Munich, Germany	Constitutive modeling of active skeletal muscle in a continuum-mechanical model of the human shoulder
Camacho Gómez, Daniel	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids
Cardillo, Giulia	École Polytechnique, France	A computational model of chemically and mechanically induced platelet plug formation Presenter
Carvalhais, Pedro	Figueira da Foz District Hospital, Portugal	Development of a biomechanical device to support the fixation and adjustment for Chevron Osteotomy
Carvalho, Eduardo	University of Porto, Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal	Surrogate modelling of the constitutive behaviour of hyperelastic materials based on artificial neural networks Presenter
Carvalho, Mariana Rocha	Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal; University of Porto, Portugal; Research Center of IPO Porto (CI-IPOP)/RISE@CI-IPOP (Health Research Network), Portuguese Oncology Institute of Porto (IPO Porto), Porto Comprehensive Cancer Centre (Porto.CCC), Portugal	Strain-driven anisotropic growth: a constitutive model for solid tumors Presenter
Cash, Jenna	University of Edinburgh, United Kingdom	Global and local strain properties of skin during wound healing
Castoldi, Natalia Mühl	Queensland University of Technology, Australia; MSME, CNRS UMR 8208, Univ Paris Est Creteil, Univ Gustave Eiffel, France	Study of effects of bone turnover and mineralisation kinetics on BMDD through a discrete statistical bone remodelling model Presenter
Castro, André P. G.	IDMEC - Instituto Superior Técnico, Universidade de Lisboa, Portugal; ESTSetúbal, Instituto Politécnico de Setúbal, Portugal	Cervical spine segmentation for tissue engineering applications Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering
Chakrabarti, Brato	CCB, Flatiron Institute, United States	Theory for synchronization driven flows in bulk and on surfaces
Charrier, Anne	Aix Marseille Université, CNRS, CINAM, Turing Centre for Living Systems, France; Aix Marseille Univ, CNRS, CINAM, France	Physics of the extreme deformation of red blood cells in splenic slits Red cell movement as a clinical mechanical marker in sickle cell disease
Chen, Casey	University of Southern California, USA	Protein interactions informs translation pathway for disease mitigation and regeneration
Chen, Jinju	Newcastle University, United Kingdom	A continuum model to predict mechanosensing of fibroblast cells adhered on different materials Presenter A new tool to simultaneously determine cell mechanics and cell-to-surface adhesion Presenter
Chiang, YouRong	TU Wien, Austria	A novel data-driven constitutive model for individual collagen fibrils based on hypoelasticity Presenter
Chlup, Hynek	Czech Technical University in Prague,Czech Republic	Mechanical properties of venous aneurysmatic tissue Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Cipitria, Amaia	Max Planck Institute of Colloids and Interfaces, Germany; Biodonostia Health Research Institute, Spain; IKERBASQUE, Basque Foundation for Science, Spain	A stochastic cellular automaton model to simulate bone remodeling
Clement, Alice	Flinders University, Australia	Shedding light on old bones: modern imaging methods elucidate early tetrapod skeletal evolution over the water-land transition Presenter
Cohen, Noy	Technion - Israel Institute of Technology, Israel	Multi-scale modeling of the humidity-induced response of spider silk Presenter
Colabella, Lucas	MSME, UMR CNRS 8208, France; INTEMA, CONICET, Argentina	Anisotropic properties of peri-implant bone tissue are affected by collagen fibre orientation Presenter
Collins, Caitlyn Jayne	Virginia Tech, United States of America; ETH Zurich, Switzerland	Longitudinal HR-pQCT-derived remodelling and mechanoregulation – the pathway to mechanical biomarkers Presenter
Colohan, Bailey	City University of New York Graduate Center, United States of America	Scaling of osteocyte lacuna density and its implications for the tissue-specific metabolic rate of bone
Comellas, Ester	Universitat Politècnica de Catalunya (UPC), Spain	Turing patterns as a model for predicting morphogen expression in joint formation Presenter Turing patterns in growing three-dimensional domains
Conway, Will	Flatiron Institute/Simons Foundation, United States of America; New York Structural Biology Center, United States of America	Probing the physical basis of human mitotic spindle self-organization using data from electron microscopy
Cooper, David	University of Saskatchewan, Canada	Spatio-temporal regulation of cortical bone remodeling: new insights through four-dimensional imaging of rabbit models Presenter Study of effects of bone turnover and mineralisation kinetics on BMDD through a discrete statistical bone remodelling model
Coppini, Raffaele	University of Florence, Italy	Numerical analysis of the compression behaviour of cell spheroids
Cortesão Seiça, Emanuel	Figueira da Foz District Hospital, Portugal	Development of a biomechanical device to support the fixation and adjustment for Chevron Osteotomy
Crichton, Michael	Heriot Watt University, United Kingdom	Global and local strain properties of skin during wound healing Presenter
D'Andrea, Luca	Politecnico di Milano, Italy	Design and finite element analysis of a Voronoi-based ceramic scaffold for bone tissue engineering with enhanced strength Presenter
D'Andrea, Luca	Politecnico di Milano, Italy	Fracture of compression-dominated ceramic-based bone scaffold through the phase field model
Dahmen, Uta	Jena University Hospital, Germany	Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling
Daniel, Carola	University of Edinburgh, UK	Multi-modal imaging-based computational bone strength assessment incorporating pre-existing ‘hidden’ microporosity
Darras, Alexis	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation Presenter
Das, Sovan Lal	Indian Institute of Technology, India	Red blood cell and calcium dynamics from endothelial cells
Dašić, Lazar	University of Kragujevac, Serbia	Automatic segmentation of 3D cell volumes based on 2D U-Net convolutional neural network
De Cet, Anna	Politecnico di Milano, Italy	Design and finite element analysis of a Voronoi-based ceramic scaffold for bone tissue engineering with enhanced strength Fracture of compression-dominated ceramic-based bone scaffold through the phase field model Presenter
Dias Castilho, Miguel	Eindhoven University of Technology, the Netherlands	Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications
Dinkel, Maximilian	Technical University of Munich, Germany	Efficient Bayesian approaches for forward and backward uncertainty propagation targeting complex biomechanical models and expensive legacy solvers
Djukic, Tijana	Bioengineering Research and Development Center (BioIRC), Serbia; Institute for Information Technologies, Kragujevac, Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries
Doblaré, Manuel	University of Zaragoza, Spain; Aragon Institute of Engineering Research (I3A), Spain; Aragon Institute of Health Research (IIS Aragón), Spain; Centro de Investigación Biomédica en Red en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Spain; Nanjing Tech University, China	A continuum mathematical framework for cell phenotypic plasticity using internal variables: simulating glioblastoma adaptation to hypoxia
Drasdo, Dirk	Inria Saclay Ile-de-France, France	Modelling flow and transport in liver micro-architecture: towards a multi-functional digital twin
Drasdo, Dirk	INRIA de Saclay, France	Quantitative cell-based model predicts mechanical stress response of growing tumor spheroids over several growth conditions and cell lines
Eckhart, Barbara	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Ehrmann, Andreas	Institute of Science and Technology Austria (ISTA), Austria	Energy consumption using coupled colloidal clusters Presenter
Eisenbach, Claus	University of California, Santa Barbara, California	Multi-scale modeling of the humidity-induced response of spider silk
Engelhardt, Laura	Technical University of Munich, Germany	Constitutive modeling of active skeletal muscle in a continuum-mechanical model of the human shoulder Presenter
Engelhardt, Lucas	Ulm University, Germany	An innovative web-based learning platform for improving knowledge and skills in fracture healing simulation in application to literature comparison of in-vivo data Presenter
Fazio, Vincenzo	University of Trento, Italy	Hierarchical physically based machine learning in material science: the case study of spider silk Presenter
Fediuk, Melanie	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Feng, Xiqiao	Tsinghua University, China	A continuum model to predict mechanosensing of fibroblast cells adhered on different materials
Fernandes, António Augusto	University of Porto, Portugal	Determining in vivo biomechanical properties of the bladder in patients with and without urinary incontinence
Fernandes, Paulo R.	IDMEC - Instituto Superior Técnico, Universidade de Lisboa, Portugal	Cervical spine segmentation for tissue engineering applications Presenter Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering
Ferreira, João P. S.	University of Porto, Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal	Surrogate modelling of the constitutive behaviour of hyperelastic materials based on artificial neural networks Strain-driven anisotropic growth: a constitutive model for solid tumors
Ferreira, Nuno	University of Porto, Portugal	Determining in vivo biomechanical properties of the bladder in patients with and without urinary incontinence
Fidalgo, Daniel Santos	INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Biomechanical analysis of the fetal membrane under different off-plane collagen fibers Presenter
Filipović, Nenad	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Application of machine learning algorithms for shear stress classification of hip implant surface topographies Automatic segmentation of 3D cell volumes based on 2D U-Net convolutional neural network
Filipovic, Nenad	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries
Filipović, Nenad	Research and Development Center for Bioengineering BioIRC, Serbia; University of Kragujevac, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Filipovic, Nenad	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Integration of Huxley muscle surrogate model based on physics-informed neural network into finite element solver
Flament, Baptiste	MSME, CNRS 8208, UGE, Université Paris Est Creteil, France	CANCELLED! Role of flexo-piezo-electricity in bone interstitial fluid flow
Fontes Gomes, Anna Karina	University of Rostock, Germany	Numerical simulation of electro-stimulative bone implants - a multiscale perspective
Fotiadis, Dimitrios	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Fraley, Stephanie I.	University of California - San Diego, United States of America	Predicting cancer cell mechanics based on cell phenotype and the microenvironment
Frank, Martin	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Fritz, Jennifer	University for Continuing Education Krems, Austria	3D-meniscua-regeneration: from μCT imaging to 3D printing
Fuerthauer, Sebastian	TU Wien, Austria	Theory for synchronization driven flows in bulk and on surfaces Presenter
Fujimura, Soichiro	Jikei University School of Medicine, Japan; Tokyo University of Science, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis
Fürthauer, Sebastian	TU Wien, Austria	Cytoskeletal networks at interfaces
G. Andriotis, Orestis	Technische Universität Wien, Austria	Numerical analysis of the compression behaviour of cell spheroids
Gaikwad, Hanmant	North Dakota State University, United States of America	Molecular origin of mechanobiology of breast and prostate cancer bone metastasis
Gakovic, Branko	University of Belgrade, Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries
Galbiati, Federica	Mines Saint-Etienne, France	Homeostatic, stress-driven, isotropic growth in soft tissues: a hypoelastic micromechanical framework
Gao, Yanfei	The University of Tennessee, United States	A continuum model to predict mechanosensing of fibroblast cells adhered on different materials
García Aznar, José Manuel	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids Presenter
Garcia-Aznar, Jose Manuel	University of Zaragoza, Spain	Insights into the biomechanics and clinical implications of neuroblastoma tumour evolution modelling
García-Gareta, Elena	University of Zaragoza, Spain	Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications
Gasser, Christian Thomas	KTH Royal Institute of Technology, Sweden	Symmetry-constraint Compact Tension test for mechanical fracture characterisation of biological soft tissue
Gastaldi, Dario	Politecnico di Milano, Italy	Design and finite element analysis of a Voronoi-based ceramic scaffold for bone tissue engineering with enhanced strength Fracture of compression-dominated ceramic-based bone scaffold through the phase field model
Geitner, Carolin M.	Technical University of Munich, Germany	Towards a coupled multiphase porous media approach for modeling air flow, blood flow and gas exchange in the human lungs
Gekle, Stephan	Universität Bayreuth, Germany	Time-dependent and transient states of red blood cells Presenter
Georgii, Joachim	Fraunhofer Institute for digital Medicine MEVIS, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods
Gerach, Tobias	Karlsruhe Institute of Technology (KIT), Germany	Electro-mechanical modeling and simulation of the human heart
Gerhäusser, Steffen	University of Stuttgart, Germany	A multiscale and multiphase digital twin of function-perfusion processes in the human liver Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling Studying the impact of drug metabolism on the liver tissue: An integrated PBPK-continuum biomechanical modeling approach
Geroski, Tijana	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia; Research and Development Center for Bioengineering BioIRC, Serbia	Application of machine learning algorithms for shear stress classification of hip implant surface topographies Presenter Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Ghodrati, Mojgan	Medical University of Vienna, Austria	Fluid-structure-interaction simulation of bioprosthetic aortic valve using an anisotropic hyperelastic leaflet material model
Giannopoulos, Dimosthenis	Technische Universität Wien, Austria	Numerical analysis of the compression behaviour of cell spheroids Presenter
Gieringer, Anja	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Giusteri, Giulio Giuseppe	Università degli studi di Padova, Italy	Periodic rhomboidal cells for symmetry-preserving homogenization and isotropic metamaterials Presenter
Giustolisi, Orazio	Polytechnic University of Bari, Italy	Hierarchical physically based machine learning in material science: the case study of spider silk
Goldman, Haviva M.	Drexel University College of Medicine, United States of America	Multiscale and multidisciplinary perspectives on bone growth, remodeling and adaptation Presenter
Gomez-Benito, Maria Jose	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids Insights into the biomechanics and clinical implications of neuroblastoma tumour evolution modelling
Gonçalves, Adriana	Eindhoven University of Technology, the Netherlands	Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications
Gonçalves, I.	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids
Gonçalves, L.	University of Coimbra, Portugal	A structural numerical simulation preliminary study of a left atrial appendage
González Ballester, Miguel A.	Universitat Pompeu Fabra, Spain; ICREA, Spain	Computational model of guided growth in immature skeleton for custom-made correction of deformities
Goodrich, Carl P.	Institute of Science and Technology Austria (ISTA), Austria	Energy consumption using coupled colloidal clusters
Goryachev, Andrew	University of Edinburgh, United Kingdom	Modification and interactions of chemical and biomechanical instability modes in a model of small GTPase signalling molecule
Gosling, Sarah B	Keele University, United Kingdom	The long way round: from applications to fundamental features of apatites
Goubergrits, Leonid	Deutsches Herzzentrum der Charité, Germany; Charité – Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt Universität zu Berlin, Germany; Einstein Center Digital Future, Germany	Image-based simulation of left ventricular hemodynamics: a numerical framework towards clinical feasibility
Gracka, Maria	Silesian University of Technology, Poland	CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient
Gradischar, Andreas	CAE Simulation & Solutions GmbH, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology Presenter
Greenwood, Charlene E	Keele University, United Kingdom	The long way round: from applications to fundamental features of apatites Presenter
Grosjean, Elise	Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Germany	Numerical treatment and sensitivity analysis of a cell-based mathematical model of tissue regeneration Presenter
Grünewald, Tilman	Aix-Marseille Université, CNRS, Centrale Marseille, Institut Fresnel, France	3D analytical beam theory for magnesium pin-implanted rat femur
Gsell, Matthias AF	Medical University of Graz, Austria; BioTechMed Graz, Austria	Physiologically valid models of cardiac electromechanics with clinical applications
Guerrero, Pedro	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids
Gupta, Ishan	Graz University of Technology, Austria	Modelling of thrombosis in aortic dissection with the theory of porous media
Haberbusch, Max	Medical University of Vienna, Austria; Ludwig Boltzmann Institute for Cardiovascular Research, Austria	Unlocking cardiac sympathovagal balance: insights from a mathematical model and autonomic markers Presenter
Haiat, Guillaume	MSME, UMR CNRS 8208, France	Anisotropic properties of peri-implant bone tissue are affected by collagen fibre orientation
Hammer, Niels	Medical University of Graz, Austria; University of Leipzig, Germany; Fraunhofer IWU, Germany	Mechanical and structural mapping of the human dura mater Development of individual rib implants using thorax FEM simulations and 3D printing technology Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Harrison, Kimberly	University of Saskatchewan, Canada	Spatio-temporal regulation of cortical bone remodeling: new insights through four-dimensional imaging of rabbit models
Helfer, Emmanuele	Aix Marseille Université, CNRS, CINAM, Turing Centre for Living Systems, France; Aix Marseille Univ, CNRS, CINAM, France	Physics of the extreme deformation of red blood cells in splenic slits Red cell movement as a clinical mechanical marker in sickle cell disease
Heller, Anna-Dorothea	Max Planck Institute of Colloids and Interfaces, Germany	A stochastic cellular automaton model to simulate bone remodeling Presenter
Hellmeier, Florian	Deutsches Herzzentrum der Charité, Germany; Charité – Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt Universität zu Berlin, Germany	Image-based simulation of left ventricular hemodynamics: a numerical framework towards clinical feasibility
Hellmich, Christian	TU Wien, Austria	3D analytical beam theory for magnesium pin-implanted rat femur A continuum mechanics approach to assess the tensile properties of lamin rods A novel data-driven constitutive model for individual collagen fibrils based on hypoelasticity
Hervas-Raluy, Silvia	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids In-silico modelling of prostate cancer growth Insights into the biomechanics and clinical implications of neuroblastoma tumour evolution modelling Presenter
Higgins, Jonathan M. G.	Newcastle University, United Kingdom	A new tool to simultaneously determine cell mechanics and cell-to-surface adhesion
Hill, Nicholas A.	University of Glasgow, United Kingdom	Multiscale framework for estimating elastic response of cytoskeleton during intracellular transport
Hirtler, Lena	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Hof, Björn	Institute of Science and Technology Austria, Austria	Synchronization in collectively moving inanimate and living active matter
Hofstaetter, Jochen G.	Orthopedic Hospital Vienna Speising, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Holzberger, Fabian	Technical University of Munich, Germany	Sensitivity study of a computational model for endovascular coil deployment in cerebral aneurysms Presenter
Hornung, Alexander	Aix Marseille Univ, CNRS, CINAM, France	Red cell movement as a clinical mechanical marker in sickle cell disease
Horný, Lukáš	Czech Technical University in Prague,Czech Republic	Mechanical properties of venous aneurysmatic tissue Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Howley, Enda	University of Galway, Ireland	Coupled agent-based and finite-element models for analysis of force-sensitive cell and tumour growth
Hu, Bin	New York University, United States of America	Scaling of osteocyte lacuna density and its implications for the tissue-specific metabolic rate of bone
Huber, Cora	Stryker Leibinger GmbH & Co. KG, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods
Huber, Stepahnie	Orthopedic Hospital Vienna Speising, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Iamsamang, Jirawat	Eindhoven University of Technology, the Netherlands	Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications
Ishibashi, Toshihiro	Jikei University School of Medicine, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis
Ivanovic, Milos	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Integration of Huxley muscle surrogate model based on physics-informed neural network into finite element solver
Izadpanah, Kaywan	Freiburg University Hospital, Albert-Ludwigs-University Freiburg, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods
J. Shelley, Michael	Flatiron Institute/Simons Foundation, United States of America; New York University, United States of America	Probing the physical basis of human mitotic spindle self-organization using data from electron microscopy
J. Thurner, Philipp	Technische Universität Wien, Austria	Numerical analysis of the compression behaviour of cell spheroids
Janko, Christina	Universitätsklinikum Erlangen, Germany	Computational modelling of magnetic nanoparticle-mediated drug delivery in a multiphase porous media tumour model
Jasuja, Haneesh	North Dakota State University, United States of America	Role of fluid-flow induced shear stresses on bone metastasis
Jaswandkar, Sharad	North Dakota State University, United States of America	Molecular origin of mechanobiology of breast and prostate cancer bone metastasis
Jaswandkar, Sharad V.	North Dakota State University, United States of America	Role of fluid-flow induced shear stresses on bone metastasis
Jin, Min	Université Grenoble Alpes, France	The effect of glycocalyx alteration on red blood cells aggregation Presenter
Johann, Tim	University of Leipzig, Germany	Quantitative cell-based model predicts mechanical stress response of growing tumor spheroids over several growth conditions and cell lines
John, Thomas	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Kaestner, Lars	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Kainberger, Franz	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Kakizaki, Shota	Atsugi City Hospital, Japan	Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis
Kalliauer, Johannes	MIT, USA	A continuum mechanics approach to assess the tensile properties of lamin rods
Kanebayashi, Haruki	Tokyo University of Science, Japan; Jikei University School of Medicine, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Presenter
Kaoui, Badr	CNRS and Universite de Technologie de Compiegne, France	Biomechanics and mechanobiology of the lymphatic vessels Presenter
Karabay, Esra T.	San Diego State University, United States of America; University of California - San Diego, United States of America	Predicting cancer cell mechanics based on cell phenotype and the microenvironment
Karanasiou, Georgia	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Karkhaneh Yousefi, Ali Akbar	Mines Saint-Etienne, France	A computational model of the intracellular interactions after acto-myosin activation Presenter
Karšaj, Igor	University of Zagreb, Croatia	Influence of mounting-induced pre-stretches on the material characterization of soft tissue Numerical investigation of efficiency of bionic-inspired shape memory polymer stents
Katira, Parag	San Diego State University, United States of America	Predicting cancer cell mechanics based on cell phenotype and the microenvironment Presenter
Katsamenis, Orestis	University of Southampton, UK	Image-based micromechanical modelling of skin dermis
Katsouras, Christos	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Katti, Dinesh R.	North Dakota State University, United States of America	Molecular origin of mechanobiology of breast and prostate cancer bone metastasis Presenter Mechanics: a new tool for cancer biology Role of fluid-flow induced shear stresses on bone metastasis
Katti, Kalpana S.	North Dakota State University, United States of America	Molecular origin of mechanobiology of breast and prostate cancer bone metastasis Role of fluid-flow induced shear stresses on bone metastasis Presenter Mechanics: a new tool for cancer biology Presenter
Kershaw, Lucy	University of Edinburgh, UK	Multi-modal imaging-based computational bone strength assessment incorporating pre-existing ‘hidden’ microporosity
Keshavanarayana, Pradeep	University of Birmingham, United Kingdom	A novel contact-mechanics based model for endothelial permeability Presenter
Köglmeier, Lea J.	Technical University of Munich, Germany	Towards a coupled multiphase porous media approach for modeling air flow, blood flow and gas exchange in the human lungs Presenter
Kojic, Milos	Bioengineering Research and Development Center (BioIRC), Serbia; Houston Methodist Research Institute, USA; Serbian Academy of Sciences and Arts, Serbia	Integration of Huxley muscle surrogate model based on physics-informed neural network into finite element solver
Komarova, Svetlana	McGill University, Canada	Communications among bone cells in response to physical forces: role of extracellular ATP and its derivatives Presenter
Koncar, Igor	University of Belgrade, Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries
König, Matthias	Humboldt University Berlin, Germany	Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling Studying the impact of drug metabolism on the liver tissue: An integrated PBPK-continuum biomechanical modeling approach Presenter
Königshofer, Markus	Medical University of Vienna, Austria	Computational prediction of elastic properties of material jetted multimaterials Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Kornfellner, Erik	Medical University of Vienna, Austria	Computational prediction of elastic properties of material jetted multimaterials Presenter Piezoelectric excitation of bone metabolism scrutinized by means of multiscale modeling Presenter
Köry, Jakub	University of Glasgow, United Kingdom	Multiscale framework for estimating elastic response of cytoskeleton during intracellular transport Presenter
Kottman, Peter	Inria Saclay Ile-de-France, France; Charles University Prague, Czech Republic	Modelling flow and transport in liver micro-architecture: towards a multi-functional digital twin Presenter
Krach, Wolfgang	CAE Simulation & Solutions GmbH, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Krainz, Lisa	Medical University of Vienna, Austria	Computational prediction of elastic properties of material jetted multimaterials
Krall, Marcell	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Krause, Arno	Medical University of Vienna, Austria	Computational prediction of elastic properties of material jetted multimaterials
Krauß, Jonathan	Karlsruhe Institute of Technology (KIT), Germany	Electro-mechanical modeling and simulation of the human heart
Kronek, Jakub	Czech Technical University in Prague,Czech Republic	Mechanical properties of venous aneurysmatic tissue Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Krüger, Timm	The University of Edinburgh, United Kingdom	Computational modelling of leukocyte dynamics in microfluidic devices for rapid sepsis detection In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Kruse, Karsten	University of Geneva, Switzerland	Isolated structures in the actin cortex: a theory of solitude
Kuželová Košťáková, Eva	Technical University of Liberec, Czech Republic	Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Lambers, Lena	University of Stuttgart, Germany; Jena University Hospital, Germany	A multiscale and multiphase digital twin of function-perfusion processes in the human liver Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling Studying the impact of drug metabolism on the liver tissue: An integrated PBPK-continuum biomechanical modeling approach
Lange, Thomas	Medical Center - University of Freiburg, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods
Laschke, Matthias W.	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Latorre Molins, Alvaro Tomas	University of Zaragoza, Spain	In silico study of the mechanical characterization of atherosclerotic tissues in coronary arteries Presenter
Le Cann, Sophie	MSME, UMR CNRS 8208, France	Anisotropic properties of peri-implant bone tissue are affected by collagen fibre orientation
Lebschy, Carola	CAE Simulation & Solutions GmbH, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Lecina Tejero, Oscar	University of Zaragoza, Spain	Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications Presenter
Leda, Marcin	University of Edinburgh, United Kingdom	Modification and interactions of chemical and biomechanical instability modes in a model of small GTPase signalling molecule Presenter
Lemaire, Thibault	MSME, CNRS 8208, UGE, Université Paris Est Creteil, France	CANCELLED! Role of flexo-piezo-electricity in bone interstitial fluid flow Presenter
Levi, Mattan	Tel Aviv University, Israel	Dynamic 3D mechanical numerical modeling for human sperm motility through the female reproductive system to predict sperm chance of reaching the oocyte
Levin, Michal	Technion - Israel Institute of Technology, Israel	Multi-scale modeling of the humidity-induced response of spider silk
Li, Jia	University of Southampton, UK	Image-based micromechanical modelling of skin dermis Presenter
Lichtenegger, Helga	University of Natural Resources and Life Sciences, Austria	3D analytical beam theory for magnesium pin-implanted rat femur
Liebi, Marianne	PSI, Villigen und EPFL, Switzerland	3D analytical beam theory for magnesium pin-implanted rat femur
Liero, Matthias	Weierstrass Institute Berlin, Germany	Variational modeling of biomechanical systems Presenter
Limbert, Georges	University of Southampton, UK; University of Cape Town, South Africa	Image-based micromechanical modelling of skin dermis
Lindenmann, Jörg	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Liprandi, Daniele	Universität Greifswald, Germany	A combined mathematical-computational tool for the fracture behaviour of hierarchical fibre bundles Presenter
Loewe, Axel	Karlsruhe Institute of Technology (KIT), Germany	Electro-mechanical modeling and simulation of the human heart Presenter
Lories, Bram	KU Leuven, Belgium	Modeling bacterial biofilm architecture in function of extracellular matrix production
Loukas, Vasilis	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach Presenter
Loundagin, Lindsay	University of Saskatchewan, Canada	Spatio-temporal regulation of cortical bone remodeling: new insights through four-dimensional imaging of rabbit models
Lukeš, Vladimír	University of West Bohemia, Czech Republic	Acoustic wave propulsion of fluids in tissues - homogenization and nonlinearity
Luo, Ma	Newcastle University, United Kingdom	A continuum model to predict mechanosensing of fibroblast cells adhered on different materials A new tool to simultaneously determine cell mechanics and cell-to-surface adhesion
Luo, Xiaoyu	University of Glasgow, United Kingdom	Multiscale framework for estimating elastic response of cytoskeleton during intracellular transport
Maddu, Suryanarayana	Flatiron Institute/Simons Foundation, United States of America	Probing the physical basis of human mitotic spindle self-organization using data from electron microscopy Presenter
Maitra, Ananyo	LPTM, France	Chiral active liquid crystals Presenter
Mallorie, Calum	The University of Edinburgh, United Kingdom	Computational modelling of leukocyte dynamics in microfluidic devices for rapid sepsis detection Presenter
Mandl, Luis	University of Stuttgart, Germany	A multiscale and multiphase digital twin of function-perfusion processes in the human liver Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling Presenter Studying the impact of drug metabolism on the liver tissue: An integrated PBPK-continuum biomechanical modeling approach
Manjunatha, Kiran	RWTH Aachen University, Germany	A coupled multiphysics approach for modeling in-stent restenosis Presenter
Marino, Michele	University of Rome Tor Vergata, Italy	Modelling vascular tone regulation: a chemo-mechano-biological approach integrating molecular and systemic mechanisms
Markert, Bernd	RWTH Aachen University, Germany	Time-dependent behavior of inflated tubular structures applicable to arterial soft tissue
Martínez Barca, Miguel Ángel	University of Zaragoza, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Aragon Health Sciences Institute, Spain	In silico study of the mechanical characterization of atherosclerotic tissues in coronary arteries
Masuda, Kazunori	Tokyo University of Science, Japan; Jikei University School of Medicine, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis Presenter
Mateos Arriola, Jorge	Universitat Pompeu Fabra, Spain	Computational model of guided growth in immature skeleton for custom-made correction of deformities Presenter
McBride, Andrew	University of Glasgow, United Kingdom	Exploring bone remodelling via a novel micromorphic approach
McEvoy, Eoin	University of Galway, Ireland	Coupled agent-based and finite-element models for analysis of force-sensitive cell and tumour growth Presenter
McPhee, Samuel	Heriot-Watt University, UK	Multi-modal imaging-based computational bone strength assessment incorporating pre-existing ‘hidden’ microporosity Validation of nonlinear μFE models of cortical bone using SR-μCT imaging and digital volume correlation
Medina-Lombardero, Sara	Heriot Watt University, United Kingdom	Global and local strain properties of skin during wound healing
Meesters, Jolien	KU Leuven, Belgium	Modeling bacterial biofilm architecture in function of extracellular matrix production
Melka, Bartlomiej	Silesian University of Technology, Poland	CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient Presenter
Menger, Michael D.	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Merrin, Jack	Institute of Science and Technology Austria, Austria	Synchronization in collectively moving inanimate and living active matter
Mesek, Mateusz Łukasz	Norwegian University of Science and Technology, Norway; Silesian University of Technology, Poland; SUT, Poland; NTNU, Norway	Estimation of material parameters of the arterial wall through inverse modeling with a 1D model of the artery Application of the Kalman filter for estimation of material parameters of arteries Presenter
Meyer-Zedler, T.	Leibniz Institute of Photonic Technology, Germany	Mechanical and structural mapping of the human dura mater
Michalis, Lambros	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Mielke, Andre	University of Stuttgart, Germany	A multiscale and multiphase digital twin of function-perfusion processes in the human liver
Mijatović, Magdalena	University of Zagreb, Croatia	Numerical investigation of efficiency of bionic-inspired shape memory polymer stents
Miličević, Bogdan	Research and Development Center for Bioengineering BioIRC, Serbia; University of Kragujevac, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Milicevic, Bogdan	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Integration of Huxley muscle surrogate model based on physics-informed neural network into finite element solver Presenter
Mills, David	Queen Mary University of London, UK	Doing it right - bone mineral measurements with X-ray micro-tomography Presenter
Milošević, Miljan	Research and Development Center for Bioengineering BioIRC, Serbia; University of Kragujevac, Serbia; Belgrade Metropolitan University, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Milosevic, Miljan	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia; Belgrade Metropolitan University, Serbia	Integration of Huxley muscle surrogate model based on physics-informed neural network into finite element solver
Misbah, Chaouqi	Université Grenoble Alpes, France	Red blood cell and calcium dynamics from endothelial cells The effect of glycocalyx alteration on red blood cells aggregation
Möbius, Dustin	University Medical Center Hamburg-Eppendorf, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Moeendarbary, Emad	University College London, United Kingdom	A novel contact-mechanics based model for endothelial permeability
Moravcová, Fanny	University of West Bohemia, Czech Republic	Acoustic wave propulsion of fluids in tissues - homogenization and nonlinearity
Moreau, Alexis	Aix Marseille Université, CNRS, CINAM, Turing Centre for Living Systems, France	Physics of the extreme deformation of red blood cells in splenic slits
Morin, Claire	Mines Saint-Etienne, France	Homeostatic, stress-driven, isotropic growth in soft tissues: a hypoelastic micromechanical framework Presenter
Mortensen, Peter	University of Glasgow, United Kingdom	Biomechanical analysis of aortic roots: differences between tricuspid and bicuspid aortic valve patients
Moscato, Francesco	Medical University of Vienna, Austria; Ludwig Boltzmann Institute for Cardiovascular Research, Austria; Austrian Cluster for Tissue Regeneration	Computational prediction of elastic properties of material jetted multimaterials Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications Fluid-structure-interaction simulation of bioprosthetic aortic valve using an anisotropic hyperelastic leaflet material model Unlocking cardiac sympathovagal balance: insights from a mathematical model and autonomic markers
Mosconi, Denis	Federal Institute of São Paulo, Brazil; University of São Paulo, Brazil	Bipedal neuromusculoskeletal model for biomechanical simulations of sit-to-stand movement Presenter
Moser, Anna-Christina	University for Continuing Education Krems, Austria; University Hospital Krems, Austria	3D-meniscua-regeneration: from μCT imaging to 3D printing Presenter
Moura, Rita	Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal; University of Porto, Portugal	Predicting pelvic floor injuries during childbirth using machine learning and finite element simulations Presenter
Muhr, Markus	Technical University of Munich, Germany	Sensitivity study of a computational model for endovascular coil deployment in cerebral aneurysms
Müller, Ralph	ETH Zurich, Switzerland	Micro-multiphysics agent-based modeling for the exploration of bone remodeling mechanisms and mechanoregulation in aging Presenter
Muñoz, Jose J	Universitat Politècnica de Catalunya (UPC), Spain	Turing patterns as a model for predicting morphogen expression in joint formation Turing patterns in growing three-dimensional domains
Murayama, Yuichi	Jikei University School of Medicine, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis
Myers, Kristin	Columbia University in The City of New York, United States	Biomechanical analysis of the fetal membrane under different off-plane collagen fibers
Naili, Salah	MSME, UMR CNRS 8208, Univ Paris Est Creteil, Univ Gustave Eiffel, France	Anisotropic properties of peri-implant bone tissue are affected by collagen fibre orientation
Nassir, Mayssam	Tel Aviv University, Israel	Dynamic 3D mechanical numerical modeling for human sperm motility through the female reproductive system to predict sperm chance of reaching the oocyte Presenter
Nassoy, Pierre	Institut d'Optique, France	Quantitative cell-based model predicts mechanical stress response of growing tumor spheroids over several growth conditions and cell lines
Natal, Renato	INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Biomechanical analysis of the fetal membrane under different off-plane collagen fibers
Natal Jorge, Renato	Faculty of Engineering of University of Porto (FEUP), Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal	A new numerical algorithm to simulate angiogenesis during tumour growth Predicting pelvic floor injuries during childbirth using machine learning and finite element simulations
Nayak, Ananta Kumar	Université Grenoble Alpes, France	Red blood cell and calcium dynamics from endothelial cells Presenter
Needleman, Daniel	Flatiron Institute/Simons Foundation, United States of America; Harvard University, United States of America	Probing the physical basis of human mitotic spindle self-organization using data from electron microscopy
Nehrer, Stefan	University for Continuing Education Krems, Austria; University Hospital Krems, Austria	3D-meniscua-regeneration: from μCT imaging to 3D printing
Neitsch, Johannes	University of Leipzig, Germany	Quantitative cell-based model predicts mechanical stress response of growing tumor spheroids over several growth conditions and cell lines
Neto, M. A.	University of Coimbra, Portugal	A structural numerical simulation preliminary study of a left atrial appendage
Nia, Arastoo	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Niemeyer, Frank	Ulm University, Germany	An innovative web-based learning platform for improving knowledge and skills in fracture healing simulation in application to literature comparison of in-vivo data
Niestrawska, Justyna Anna	Medical University of Graz, Austria	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology Mechanical and structural mapping of the human dura mater Presenter
Nitzler, Jonas	Technical University of Munich, Germany	Efficient Bayesian approaches for forward and backward uncertainty propagation targeting complex biomechanical models and expensive legacy solvers
Noailly, Jérôme	Universitat Pompeu Fabra, Spain	Computational model of guided growth in immature skeleton for custom-made correction of deformities
Nuernberger, Sylvia	Medical University of Vienna, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Obermeier, Lukas	Deutsches Herzzentrum der Charité, Germany; Charité – Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt Universität zu Berlin, Germany	Image-based simulation of left ventricular hemodynamics: a numerical framework towards clinical feasibility
Oliveira, Dulce	INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal; University of Porto, Portugal	Biomechanical analysis of the fetal membrane under different off-plane collagen fibers Predicting pelvic floor injuries during childbirth using machine learning and finite element simulations
Oliveira Belinha, Jorge Américo	Instituto Superior de Engenharia do Porto (ISEP), Portugal	A new numerical algorithm to simulate angiogenesis during tumour growth
Oliveira-Santos, M.	University of Coimbra, Portugal	A structural numerical simulation preliminary study of a left atrial appendage
Ondruschka, Benjamin	University Medical Center Hamburg-Eppendorf, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Oppenheimer, Naomi	Tel Aviv University, Israel	Structural states and Hamiltonian conservation laws in biological active flows Presenter
Ostrowski, Ziemowit	SUT, Poland; Silesian University of Technology, Poland	Application of the Kalman filter for estimation of material parameters of arteries CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient Estimation of material parameters of the arterial wall through inverse modeling with a 1D model of the artery
Otahal, Alexander	University for Continuing Education Krems, Austria	3D-meniscua-regeneration: from μCT imaging to 3D printing
Oyen, Michelle	Washington University, United States	Biomechanical analysis of the fetal membrane under different off-plane collagen fibers
Pahr, Dieter H.	TU Wien, Austria; Karl Landsteiner University of Health Sciences, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Pais, Ana	Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal	Optimal unit cell design using neural networks and multiscale techniques Presenter
Palandri, Chiara	University of Florence, Italy	Numerical analysis of the compression behaviour of cell spheroids
Papastavrou, Areti	Nuremberg Institute of Technology, Germany; TH Nürnberg, Germany	Exploring bone remodelling via a novel micromorphic approach Three-scale modelling approach of cancellous bone remodelling
Parente, Marco	Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal; University of Porto, Portugal	Predicting pelvic floor injuries during childbirth using machine learning and finite element simulations Strain-driven anisotropic growth: a constitutive model for solid tumors
Parente, Marco	INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal	Biomechanical analysis of the fetal membrane under different off-plane collagen fibers
Parente, Marco P. Lages	University of Porto, Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal	Surrogate modelling of the constitutive behaviour of hyperelastic materials based on artificial neural networks
Pavić, Ognjen	University of Kragujevac, Serbia	Automatic segmentation of 3D cell volumes based on 2D U-Net convolutional neural network Presenter
Pellicoro, Antonella	University of Edinburgh, United Kingdom	Global and local strain properties of skin during wound healing
Peña Baquedano, Estefanía	University of Zaragoza, Spain; CIBER de Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Aragon Health Sciences Institute, Spain	In silico study of the mechanical characterization of atherosclerotic tissues in coronary arteries Mechanical properties and constitutive modelling of deep fascia
Peña Fernández, Marta	Heriot-Watt University, UK	Multi-modal imaging-based computational bone strength assessment incorporating pre-existing ‘hidden’ microporosity Presenter Validation of nonlinear μFE models of cortical bone using SR-μCT imaging and digital volume correlation Presenter
Peng, Zhangli	University of Illinois, Chicago, USA	Physics of the extreme deformation of red blood cells in splenic slits
Penta, Raimondo	University of Glasgow, UK	An asymptotic homogenisation approach for nonlinear viscoelastic composites Periodic rhomboidal cells for symmetry-preserving homogenization and isotropic metamaterials
Perez, María Angeles	University of Zaragoza, Spain	Challenges in modeling the morphogenesis of human-cell-based organoids
Pérez, María Ángeles	Universidad de Zaragoza, Spain	In-silico modelling of prostate cancer growth Numerical analysis and fabrication of auxetic tissue-engineered scaffolds for skin wound healing applications
Perez, Marta María	Universidad de Zaragoza, Spain	Mechanical properties and constitutive modelling of deep fascia
Pérez-Aliacar, Marina	University of Zaragoza, Spain; Aragon Institute of Engineering Research (I3A), Spain	A continuum mathematical framework for cell phenotypic plasticity using internal variables: simulating glioblastoma adaptation to hypoxia Presenter
Pérez-Benito, Ángela	Universidad de Zaragoza, Spain	In-silico modelling of prostate cancer growth Presenter
Peschka, Dirk	Freie Universität Berlin, Germany	Variational modeling of biomechanical systems
Petřivý, Zdeněk	Czech Technical University in Prague, Czech Republic	Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding Presenter Mechanical properties of venous aneurysmatic tissue
Petrová, Nikola	Charles University in Prague, Czech Republic	Mechanical properties of venous aneurysmatic tissue
Pickering, Edmund	Queensland University of Technology, Australia	Study of effects of bone turnover and mineralisation kinetics on BMDD through a discrete statistical bone remodelling model
Piedade, A. P.	University of Coimbra, Portugal	A structural numerical simulation preliminary study of a left atrial appendage
Pinheiro, Fábio	University of Porto, Portugal	Determining in vivo biomechanical properties of the bladder in patients with and without urinary incontinence
Pircher, Lukas	TU Wien, Austria	3D analytical beam theory for magnesium pin-implanted rat femur Presenter
Pivonka, Peter	Queensland University of Technology, Australia	From bone cell population models to in-silico trials of osteoporosis treatments Presenter Spatio-temporal regulation of cortical bone remodeling: new insights through four-dimensional imaging of rabbit models Study of effects of bone turnover and mineralisation kinetics on BMDD through a discrete statistical bone remodelling model Three-scale modelling approach of cancellous bone remodelling
Plank, Gernot	Medical University of Graz, Austria; BioTechMed Graz, Austria	Physiologically valid models of cardiac electromechanics with clinical applications
Popp, Domenik	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Popp, J.	Leibniz Institute of Photonic Technology, Germany; Leibniz Center for Photonics in Infection Research, Germany; Friedrich Schiller University Jena, Germany	Mechanical and structural mapping of the human dura mater
Pouch, Alison	University of Pennsylvania, United States of America	Biomechanical analysis of aortic roots: differences between tricuspid and bicuspid aortic valve patients
Pourasghar, Aminallah	University of Pittsburgh, USA	A novel computationally efficient approach to evaluate mechanical properties of soft tissues from clinical imaging data
Pouresmaeeli, Saleh	University of Sheffield, UK	Development of a novel stochastic finite element solver to predict variation in bone mechanics considering the uncertain bone mineral density Presenter
Prasad, Jitendra	Indian Institute of Technology, India	Bone adaptation: role of interstitial fluid flow and pore pressure In silico model for cortical bone resorption in disuse condition Relating strain threshold and bone formation rate to exogenous forcing frequency Presenter
Psiuk-Maksymowicz, Krzysztof	Silesian University of Technology, Poland	CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient
Puglisi, Giuseppe	Polytechnic University of Bari, Italy	Hierarchical physically based machine learning in material science: the case study of spider silk
Pugno, Nicola Maria	University of Trento, Italy; Queen Mary University of London, UK	Hierarchical physically based machine learning in material science: the case study of spider silk
Quansah, E.	Friedrich Schiller University Jena, Germany	Mechanical and structural mapping of the human dura mater
Raben, Hendrikje	University of Rostock, Germany	Numerical simulation of electro-stimulative bone implants - a multiscale perspective Presenter
Ramirez-Torres, Ariel	University of Glasgow, UK	An asymptotic homogenisation approach for nonlinear viscoelastic composites
Ranjan, Animesh	Fraunhofer IPA, Germany	Development and simulation of a detailed modelling human leg – application in in silico orthopedics
Rashidi, Yazdan	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Reese, Stefanie	RWTH Aachen University, Germany	A coupled multiphysics approach for modeling in-stent restenosis
Reisinger, Andreas G.	Karl Landsteiner University of Health Sciences, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Reuben, Robert	Heriot Watt University, United Kingdom	Global and local strain properties of skin during wound healing
Ricken, Tim	University of Stuttgart, Germany	A multiscale and multiphase digital twin of function-perfusion processes in the human liver Presenter Continuum-mechanical- and data-driven simulations of brain tumours Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling Studying the impact of drug metabolism on the liver tissue: An integrated PBPK-continuum biomechanical modeling approach
Riebartsch, Benedikt Christopher	Medical University of Vienna, Austria	Fluid-structure-interaction simulation of bioprosthetic aortic valve using an anisotropic hyperelastic leaflet material model Presenter
Riedl, Michael	Institute of Science and Technology Austria, Austria	Synchronization in collectively moving inanimate and living active matter Presenter
Robalo Rei, Gil	Technical University of Munich, Germany	Efficient Bayesian approaches for forward and backward uncertainty propagation targeting complex biomechanical models and expensive legacy solvers
Rocliffe, Holly	University of Edinburgh, United Kingdom	Global and local strain properties of skin during wound healing
Rodewald, M.	Leibniz Institute of Photonic Technology, Germany; Leibniz Center for Photonics in Infection Research, Germany	Mechanical and structural mapping of the human dura mater
Rodriguez-Ramos, Reinaldo	Universidad de La Habana, Cuba; Universidade Federal Fluminense, Brazil	An asymptotic homogenisation approach for nonlinear viscoelastic composites
Rogers, Keith D	Cranfield University, United Kingdom	The long way round: from applications to fundamental features of apatites
Rohan, Eduard	University of West Bohemia, Czech Republic	Acoustic wave propulsion of fluids in tissues - homogenization and nonlinearity Presenter CANCELLED! Role of flexo-piezo-electricity in bone interstitial fluid flow Modelling flow and transport in liver micro-architecture: towards a multi-functional digital twin
Rojczyk, Marek	Silesian University of Technology, Poland	CFD modelling in the myocardial bridge for experimental conditions and virtual blood flow for specific patient
Roque-Piedra, Alejandro	University of Glasgow, UK	An asymptotic homogenisation approach for nonlinear viscoelastic composites Presenter
Rörich, Anna	Fraunhofer Institute for digital Medicine MEVIS, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods Presenter
Roseiro, Luis	Polytechnic Institute of Coimbra, Portugal; University of Coimbra, Portugal	Development of a biomechanical device to support the fixation and adjustment for Chevron Osteotomy Presenter
Rossini, Alessandra	Institute for Biomedicine (Affiliated to the University of Lübeck), Eurac Research, Italy	Numerical analysis of the compression behaviour of cell spheroids
Roth, Stephan V.	Deutsches Elektronen-Synchrotron DESY, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Rouet, Laurence	Philips Research, Paris, France	Simple approach for ultrasound-based AAA stiffness estimation including the effects of surrounding tissues and probe pressure
Ruben, Rui B.	ESTG, CDRSP, Instituto Politécnico de Leiria, Portugal	Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering Presenter
Sachse, Renate	Technical University of Munich, Germany	Constitutive modeling of active skeletal muscle in a continuum-mechanical model of the human shoulder
Sahun, Maxime	Aix Marseille Univ, CNRS, CINAM, France	Red cell movement as a clinical mechanical marker in sickle cell disease
Sainz-DeMena, Diego	University of Zaragoza, Spain	Insights into the biomechanics and clinical implications of neuroblastoma tumour evolution modelling
Sakellarios, Antonis	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Sansalone, Vittorio	MSME, CNRS UMR 8208, Univ Paris Est Creteil, Univ Gustave Eiffel, France	Study of effects of bone turnover and mineralisation kinetics on BMDD through a discrete statistical bone remodelling model
Santos, Diogo A.	IDMEC - Instituto Superior Técnico, Universidade de Lisboa, Portugal	Cervical spine segmentation for tissue engineering applications
Santos, Mariana	Polytechnic Institute of Coimbra, Portugal	Development of a biomechanical device to support the fixation and adjustment for Chevron Osteotomy
Sauty, Bastien	Mines Saint Etienne, France	Modelling vascular tone regulation: a chemo-mechano-biological approach integrating molecular and systemic mechanisms
Schäfer, Friederike	Norwegian University of Science and Technology, Norway	Multifidelity Monte Carlo estimates of Sobol sensitivity indices to investigate the hemodynamic response of the common carotid artery Presenter
Schäfer, Ute	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Schanz, Martin	Graz University of Technology, Austria	Modelling of thrombosis in aortic dissection with the theory of porous media Presenter
Scheiner, Stefan	TU Wien, Austria	A micromechanics-informed beam model of growing wood structures Presenter Piezoelectric excitation of bone metabolism scrutinized by means of multiscale modeling
Schiavazzi, Daniele	University of Notre Dame, United States	Multifidelity Monte Carlo estimates of Sobol sensitivity indices to investigate the hemodynamic response of the common carotid artery
Schima, Heinrich	Medical University of Vienna, Austria; Ludwig Boltzmann Institute for Cardiovascular Research, Austria	Fluid-structure-interaction simulation of bioprosthetic aortic valve using an anisotropic hyperelastic leaflet material model
Schlittler, Maja	Institute for Biomedicine (Affiliated to the University of Lübeck), Eurac Research, Italy	Numerical analysis of the compression behaviour of cell spheroids
Schmidt, Ina	TH Nürnberg, Germany	Three-scale modelling approach of cancellous bone remodelling Presenter
Schmitt, M.	Friedrich Schiller University Jena, Germany	Mechanical and structural mapping of the human dura mater
Schneider, Karl	Medical University of Vienna, Austria	3D-meniscua-regeneration: from μCT imaging to 3D printing
Schneider, Konrad	Leibniz Institute of Polymer Research Dresden, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Schniepp, Hannes Christian	William & Mary, United States of America	Establishing the hierarchical structure of spider silk from molecular to centimeter length scales Presenter
Schrefler, Bernhard A.	Technical University of Munich, Germany; University of Padua, Italy	Computational modelling of magnetic nanoparticle-mediated drug delivery in a multiphase porous media tumour model
Schultz, C.	Friedrich Schiller University Jena, Germany	Mechanical and structural mapping of the human dura mater
Schulze-Tanzil, Gundula G.	Paracelsus Medical University Salzburg and Nuremberg, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Schwartzkopf, Matthias	Deutsches Elektronen-Synchrotron DESY, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Schwarz, Gilbert M.	Medical University of Vienna, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans
Scott, Robert	Cranfield University, United Kingdom	The long way round: from applications to fundamental features of apatites
Semertzioglou, Arsen	Rontis Corporation S.A., Switzerland	Effect of materials selection on the performance of a coronary stent - an in silico approach
Senthilkumar, Irish	University of Galway, Ireland	Coupled agent-based and finite-element models for analysis of force-sensitive cell and tumour growth
Shaked, Natan	Tel Aviv University, Israel	Dynamic 3D mechanical numerical modeling for human sperm motility through the female reproductive system to predict sperm chance of reaching the oocyte
Shefelbine, Sandra J	Northeastern University, United States of America	A historical perspective on 50 years of modeling bone adaptation Presenter Turing patterns as a model for predicting morphogen expression in joint formation Turing patterns in growing three-dimensional domains
Shekhar, Himanshu	Indian Institute of Technology, India	In silico model for cortical bone resorption in disuse condition Presenter Relating strain threshold and bone formation rate to exogenous forcing frequency
Shelley, Michael	Flatiron Institute, United States	Structural states and Hamiltonian conservation laws in biological active flows
Shoham, Yuval	Tel Aviv University, Israel	Structural states and Hamiltonian conservation laws in biological active flows
Silva, Elisabete	University of Porto, Portugal	Determining in vivo biomechanical properties of the bladder in patients with and without urinary incontinence Presenter
Simeon, Bernd	Rheinland-Pfälzische Technische Universität Kaiserslautern-Landau, Germany	Numerical treatment and sensitivity analysis of a cell-based mathematical model of tissue regeneration
Simić, Vladimir	Research and Development Center for Bioengineering BioIRC, Serbia; University of Kragujevac, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Simionato, Greta	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Simon, Marc	University of California, San Francisco, USA	A novel computationally efficient approach to evaluate mechanical properties of soft tissues from clinical imaging data
Simon, Ulrich	Ulm University, Germany	An innovative web-based learning platform for improving knowledge and skills in fracture healing simulation in application to literature comparison of in-vivo data
Sinek, Aleksander	Norwegian University of Science and Technology, Norway; Silesian University of Technology, Poland	Estimation of material parameters of the arterial wall through inverse modeling with a 1D model of the artery
Singh, Sanjay	Indian Institute of Technology, India	Bone adaptation: role of interstitial fluid flow and pore pressure Presenter Relating strain threshold and bone formation rate to exogenous forcing frequency
Singh, Satwinder Jit	Indian Institute of Technology, India	Bone adaptation: role of interstitial fluid flow and pore pressure
Siogkas, Panos	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Siqueira, Adriano	University of São Paulo, Brazil	Bipedal neuromusculoskeletal model for biomechanical simulations of sit-to-stand movement
Sixt, Michael	Institute of Science and Technology Austria, Austria	Synchronization in collectively moving inanimate and living active matter
Škugor, Toni	University of Zagreb, Croatia	Influence of mounting-induced pre-stretches on the material characterization of soft tissue Presenter
Smeets, Bart	KU Leuven, Belgium	A single-cell mechanical model to study epithelial homeostasis during embryogenesis Modeling bacterial biofilm architecture in function of extracellular matrix production
Smolle-Jüttner, Freyja	Medical University Graz, Austria	Development of individual rib implants using thorax FEM simulations and 3D printing technology
Snead, Malcolm L	University of Southern California, USA	Protein interactions informs translation pathway for disease mitigation and regeneration Presenter
Sobotka, Zbyněk	Czech Technical University in Prague,Czech Republic	Mechanical properties of venous aneurysmatic tissue Presenter Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Sochor, Benedikt	Deutsches Elektronen-Synchrotron DESY, Germany	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology
Sommer, Gerhard	TU Graz, Austria	Influence of mounting-induced pre-stretches on the material characterization of soft tissue
Spahic, Lemana	Research and Development Center for Bioengineering BioIRC, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence Presenter
Spill, Fabian	University of Birmingham, United Kingdom	A novel contact-mechanics based model for endothelial permeability
Staats, Kevin	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Steenackers, Hans	KU Leuven, Belgium	Modeling bacterial biofilm architecture in function of extracellular matrix production
Stefàno, Pierluigi	University of Florence, Italy	Numerical analysis of the compression behaviour of cell spheroids
Stein, David	Flatiron Institute, United States of America	Self-organization of microtubules through hydrodynamic interactions drives cell-spanning rotational flows Presenter Structural states and Hamiltonian conservation laws in biological active flows
Steinmann, Paul	University of Glasgow, United Kingdom; Universität Erlangen-Nürnberg, Germany	Exploring bone remodelling via a novel micromorphic approach Three-scale modelling approach of cancellous bone remodelling
Stewart, Peter S.	University of Glasgow, United Kingdom	Multiscale framework for estimating elastic response of cytoskeleton during intracellular transport
Stoegner, Alexander	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Stoffel, Marcus	RWTH Aachen University, Germany	Time-dependent behavior of inflated tubular structures applicable to arterial soft tissue
Stojanovic, Boban	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Integration of Huxley muscle surrogate model based on physics-informed neural network into finite element solver
Strassl, Andreas	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Sturdy, Jacob	NTNU, Norway; Norwegian University of Science and Technology, Norway	Application of the Kalman filter for estimation of material parameters of arteries Estimation of material parameters of the arterial wall through inverse modeling with a 1D model of the artery Presenter Multifidelity Monte Carlo estimates of Sobol sensitivity indices to investigate the hemodynamic response of the common carotid artery
Suchý, Tomáš	Czech Academy of Sciences, Czech Republic	Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Suditsch, Marlon	University of Stuttgart, Germany	Continuum-mechanical- and data-driven simulations of brain tumours Presenter
Synek, Alexander	TU Wien, Austria	Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans Presenter
Tachos, Nikolaos	University of Ioannina, Greece	Effect of materials selection on the performance of a coronary stent - an in silico approach
Takao, Hiroyuki	Jikei University School of Medicine, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis
Tamerler, Candan	University of Kansas, United States of America	Peptide and peptide-mimetics targeting biohybrid interfaces for therapeutic intervention of oral diseases Presenter
Tamerler, Candan	University of Kansas, USA	Protein interactions informs translation pathway for disease mitigation and regeneration
Tautenhahn, Hans-Michael	Jena University Hospital, Germany	Staging of ischemia reperfusion injury during liver transplantation using continuum-biomechanical modeling Studying the impact of drug metabolism on the liver tissue: An integrated PBPK-continuum biomechanical modeling approach
Taylor, Sarah	University of Edinburgh, UK	Multi-modal imaging-based computational bone strength assessment incorporating pre-existing ‘hidden’ microporosity
Temür, Buğrahan Z.	Technical University of Munich, Germany	Towards a coupled multiphase porous media approach for modeling air flow, blood flow and gas exchange in the human lungs
Teuschl, Andreas	FH Technikum, Austria	3D-meniscua-regeneration: from μCT imaging to 3D printing
Theilen, Elin	Fraunhofer Institute for digital Medicine MEVIS, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods
Thurner, Philipp J.	TU Wien, Austria	A novel data-driven constitutive model for individual collagen fibrils based on hypoelasticity
Titlbach, Anna	Nuremberg Institute of Technology, Germany	Exploring bone remodelling via a novel micromorphic approach Presenter
Todescato, Francesca	Politecnico di Milano, Italy; IDMEC - Instituto Superior Técnico, Universidade de Lisboa, Portugal	Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering
Tomasevic, Smiljana	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Combining deep learning and meshing techniques for automatic segmentation and 3D reconstruction of atherosclerotic carotid arteries Presenter
Topol, Heiko	RWTH Aachen University, Germany	Time-dependent behavior of inflated tubular structures applicable to arterial soft tissue Presenter
Unger, Ewald	Medical University of Vienna, Austria	Computational prediction of elastic properties of material jetted multimaterials Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Ur Rehman Qamar, Safi	Research and Development Center for Bioengineering BioIRC, Serbia	Improving the accuracy of peripheral artery plaque progression models with artificial intelligence
Urban, Karsten	Ulm University, Germany	An innovative web-based learning platform for improving knowledge and skills in fracture healing simulation in application to literature comparison of in-vivo data
Vairo, Giuseppe	University of Rome Tor Vergata, Italy	Modelling vascular tone regulation: a chemo-mechano-biological approach integrating molecular and systemic mechanisms Presenter
Valleriani, Angelo	Max Planck Institute of Colloids and Interfaces, Germany	A stochastic cellular automaton model to simulate bone remodeling
Valvez, S.	University of Coimbra, Portugal	A structural numerical simulation preliminary study of a left atrial appendage
Van Liedekerke, Paul	Ghent University, Belgium	Quantitative cell-based model predicts mechanical stress response of growing tumor spheroids over several growth conditions and cell lines Presenter
Van Oosterwyck, Hans	KU Leuven, Belgium	Automatic segmentation of 3D cell volumes based on 2D U-Net convolutional neural network
van Rienen, Ursula	University of Rostock, Germany	Numerical simulation of electro-stimulative bone implants - a multiscale perspective
Vangheel, Jef	KU Leuven, Belgium	A single-cell mechanical model to study epithelial homeostasis during embryogenesis Presenter
Vellguth, Katharina	Deutsches Herzzentrum der Charité, Germany; Charité – Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt Universität zu Berlin, Germany	Image-based simulation of left ventricular hemodynamics: a numerical framework towards clinical feasibility Presenter
Vena, Pasquale	Politecnico di Milano, Italy	Computational analysis of the compressive behaviour of TPMS scaffolds for bone tissue engineering Design and finite element analysis of a Voronoi-based ceramic scaffold for bone tissue engineering with enhanced strength Fracture of compression-dominated ceramic-based bone scaffold through the phase field model
Viallat, Annie	Aix Marseille Univ, CNRS, CINAM, France	Red cell movement as a clinical mechanical marker in sickle cell disease Presenter
Viallat, Annie	Aix Marseille Université, CNRS, CINAM, Turing Centre for Living Systems, France	Physics of the extreme deformation of red blood cells in splenic slits Presenter
Vignon-Clementel, Irene	Inria Saclay Ile-de-France, France	Modelling flow and transport in liver micro-architecture: towards a multi-functional digital twin
Virag, Lana	University of Zagreb, Croatia	Influence of mounting-induced pre-stretches on the material characterization of soft tissue Numerical investigation of efficiency of bionic-inspired shape memory polymer stents Presenter
Vištejnová, Lucie	Charles University, Czech Republic	Mechanical properties of collagen-based bioresorbable composite material for pulmonary artery banding
Vogt, Felix	RWTH Aachen University, Germany	A coupled multiphysics approach for modeling in-stent restenosis
vom Scheidt, Annika	Medical University of Graz, Austria	Nanoscale behavior and characterization of collagen in the human broad ligament of the uterus using small-angle X-ray scattering and histology Presenter
Vulović, Aleksandra	University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	Application of machine learning algorithms for shear stress classification of hip implant surface topographies
Wagner, Antonia	TU Wien, Austria	A micromechanics-informed beam model of growing wood structures
Wagner, Arndt	University of Stuttgart, Germany	Continuum-mechanical- and data-driven simulations of brain tumours
Wagner, Christian	Saarland University, Germany	In vivo and in silico red blood cell lingering and partitioning in the microcirculation
Walczak, Lars	Fraunhofer Institute for digital Medicine MEVIS, Germany; Charité - Universitätsmedizin Berlin, Germany	Comparison of patient-specific knee joint motion modelling using position-based dynamics and finite element methods
Wall, Wolfgang A.	Technical University of Munich, Germany	Computational modelling of magnetic nanoparticle-mediated drug delivery in a multiphase porous media tumour model Constitutive modeling of active skeletal muscle in a continuum-mechanical model of the human shoulder Efficient Bayesian approaches for forward and backward uncertainty propagation targeting complex biomechanical models and expensive legacy solvers Presenter Towards a coupled multiphase porous media approach for modeling air flow, blood flow and gas exchange in the human lungs
Wei, Xuan	University of Saskatchewan, Canada	Spatio-temporal regulation of cortical bone remodeling: new insights through four-dimensional imaging of rabbit models
Weinberg, Annelie	Medical University of Graz, Austria	3D analytical beam theory for magnesium pin-implanted rat femur
Werner, Paul	Medical University of Vienna, Austria	Fluid-structure-interaction simulation of bioprosthetic aortic valve using an anisotropic hyperelastic leaflet material model
Wiegand, Moritz	Deutsches Herzzentrum der Charité, Germany; Charité – Universitätsmedizin Berlin, corporate member of Freie Universität Berlin and Humboldt Universität zu Berlin, Germany	Image-based simulation of left ventricular hemodynamics: a numerical framework towards clinical feasibility
Wieners, Christian	Karlsruhe Institute of Technology (KIT), Germany	Electro-mechanical modeling and simulation of the human heart
Windhager, Reinhard	Medical University of Vienna, Austria	Effects of clinical CT imaging and image processing on anatomic 3D model accuracy and their relevance for clinical applications
Wirthl, Barbara	Technical University of Munich, Germany	Computational modelling of magnetic nanoparticle-mediated drug delivery in a multiphase porous media tumour model Presenter Towards a coupled multiphase porous media approach for modeling air flow, blood flow and gas exchange in the human lungs
Wohlmuth, Barbara	Technical University of Munich, Germany	Sensitivity study of a computational model for endovascular coil deployment in cerebral aneurysms
Wolff, Jonas O.	Universität Greifswald, Germany	A combined mathematical-computational tool for the fracture behaviour of hierarchical fibre bundles
Wolfram, Uwe	Heriot-Watt University, UK	Multi-modal imaging-based computational bone strength assessment incorporating pre-existing ‘hidden’ microporosity Validation of nonlinear μFE models of cortical bone using SR-μCT imaging and digital volume correlation
Wong, Timothy	University of Pittsburgh, USA	A novel computationally efficient approach to evaluate mechanical properties of soft tissues from clinical imaging data
Xavier de Carvalho, Ana	Institute for Research and Innovation in Health (I3S), Portugal	A new numerical algorithm to simulate angiogenesis during tumour growth
Yamamoto, Makoto	Tokyo University of Science, Japan	Effect of blood viscosity change on the prediction of recanalization in coil embolized intracranial aneurysms Hemodynamic investigation on thin-walled regions in intracranial aneurysms by using CFD and image analysis
Yang, Wenjian	Newcastle University, United Kingdom	A continuum model to predict mechanosensing of fibroblast cells adhered on different materials A new tool to simultaneously determine cell mechanics and cell-to-surface adhesion
Yaya, François	Aix Marseille Université, CNRS, CINAM, Turing Centre for Living Systems, France	Physics of the extreme deformation of red blood cells in splenic slits
Yildiz, Armagan Can	Fraunhofer IPA, Germany	Development and simulation of a detailed modelling human leg – application in in silico orthopedics
Young, Sarah. A. E.	Max Planck Institute of Colloids and Interfaces, Germany	A stochastic cellular automaton model to simulate bone remodeling
Zampetaki, Alexandra	TU Wien, Austria	Cytoskeletal networks at interfaces Presenter
Zhou, Qi	University of Edinburgh, United Kingdom	In vivo and in silico red blood cell lingering and partitioning in the microcirculation

ICCB 2023

X International Conference on Computational Bioengineering

September 20-22, 2023 | Vienna, Austria

Index of Authors