Phase-field modeling, X-ray tomography and in-situ testing of fracture in concrete

L. De Lorenzis

Advances in 3D image processing to evaluate damage and fracture of high-performance concrete

A. R. Carlson, E. N. Landis

To measure cracks in reinforced concrete beam without prior detection, application to diffuse cracking evaluation

G. Ewald, Y. Malecot

Improvement of the acousto-ultrasonic method using model anchor bases with controlled defects

R. Johannes, N. Godin, L. Gaillet

Damage due to microcracking in cementitious composites using AE frequency characteristics

N. Gupta, R. Vidya Sagar, J. M. Chandra Kishen

From curing to fire accident: a novel, comprehensive model for concrete’s fire resistance

S. Dal Pont, G. Sciumé, M. H. Moreira

Constitution of an extensive experimental database for the challenge of spalling modelling

J. Mounier, G. Sciumé, J.-C. Mindeguia

Influence of polypropylene fibers on thermal-induced permeability changes in concrete

A. Muhammed, H. Carre, C. La Borderie, P. Pimienta

Analysis of dehydration in high-performance concrete at high temperature using neutron radiography

T. Koyama, M. Ozawa, M. Kanematsu

From crack initiation to instability at high temperature: a two-stage mechanism for fire-induced spalling in concrete

R. Yarmohammadian, R. Felicetti

Asymptotic homogenization of discrete models with rotational degrees of freedom

J. Elias, G. Cusatis

Effects of aggregate fragmentation, free water and strain rate on fracture in compressive concrete with a coupled DEM-CFD approach

M. Krzaczek, M. Nitka, J. Tejchman

Computational analysis of size effect and failure modes in reinforced concrete beams

V. Gudžulić, G. Meschke

Exploring induced heterogeneity in elastic discrete mechanical models

J. Raisinger, Q. Zhang, J. E. Bolander, J. Eliáš

Two-way coupled multiphysics simulation of lattice discrete particle model

G. Cusatis, H. Yin, M. Troemner, W. Li, E. Lale, L. Yang, L. Shen, M. Alnaggar, G. Di Luzio

Behaviour of reinforced cement concrete under coupled corrosion fatigue

V. Vishwakarma, S. Ray

Coupled reactive transport and poromechanics modelling of external sulfate attack in cementitious materials

S. Y. Alam, A. Soive, A. Loukili

Coupled transport-chemo-mechanical simulation of cement/aggregate samples affected by DEF at the aggregate scale. Effects of pre-cracked interface and comparison with experimental data

L. Braysh, C. Pelissou, F. Perales, A. Socié

Gas transport behaviors of concrete designed for shielding nuclear structures

M. Choinska Colombel, D. Jozwiak-Niedzwiedzka, W. Kubissa

Poromechanical approach for prediction of fire-induced fracture and moisture transport of structural concrete

K. Iwama, K. Maekawa

Probabilistic service life prediction of chloride induced corrosion under sustained mechanical loading using multiphysical modeling

G. Wildermann, A. Schultheiß, R. A. Patel, F. Dehn

Computational and analytical modelling of carbonation-induced spalling of the concrete cover

A. DeKeyser, E. Verstrynge, R. Wan-Wendner, W. Botte, R. Caspeele

Effects of corrosion on tension stiffening and cracking behaviour of reinforced Engineered Cementitious Composite and concrete

L. Li, E Chen

Comprehensive uncertainty quantification of damage-based modeling of cracking in reinforced concrete structures

H. Al Elani, D. Bouhjiti, L. Jason, B. Richard

Model uncertainties of concrete cracking resistance models based on probabilistic simulations

M. Słowik, D. Novák, D. Lehký, I. Skrzypczak

Quality control & numerical nonlinear material modelling for the load-bearing capacity of slender reinforced concrete columns - comparison of safety formats

A. Strauss, B. Täubling-Fruleux, M. Soliman, M. Tamimi, X. Ruan, L. Zhu, T. Zimmermann

Numerical study of Brazilian tests of UHPFRC by using elements with embedded cohesive crack and cohesive joint elements

B. Sanz, J. Planas, J. M. Sancho

Tensorial continuum damage model for concrete

S. Dhakal, J. Hartikainen, R. Kouhia, T. Saksala, J. Vilppo, K. Calonius, A. Fedoroff, K. Kolari

Numerical investigation of the shear behavior of reinforced concrete beams with low shear reinforcement under different boundary and loading conditions

Y. H. Gedik, N. D. Tung

Blast loading effect of explosive weight distribution on RC columns

M. I. Mohnavi, G A. Rao

Introduction of dual-horizon peridynamics and nonlocal operator method

H. Ren, X. Zhuang, T. Rabczuk

High-performance reinforced concrete structures: brittleness size-scale effects

A. Carpinteri

Ductile-to-brittle transition in high-performance prestressed concrete beams: new standards for a safe and effective design

F. Accornero, D. Xie, B. Kumar, A. Carpinteri

Ductile-to-brittle transition in GFRP-bar reinforced concrete: bar-roughness effect on pseudo-plastic rotation capacity

F. Accornero, D. Xie, A. Carpinteri

Impact of fiber distribution on fatigue life variability in high-performance fiber-reinforced concrete

Á. Mena-Alonso, M. Á. Vicente, D. C. González, J. Mínguez

A new approach to concrete fatigue S-N curves considering load application rate

M. Á. Vicente, A. Mena-Alonso, D. C. González, J. Mínguez

Fatigue damage assessment of concrete using wide-range experimental data

P. Miarka, J. D. Rios, S. Seitl, V. Bílek, H. Cifuentés

Enhancing matrix-fiber bond and mechanical performance with high-performance plasticizers

J. D. Ruiz-Martínez, J. D. Ríos, E. M. Pérez Soriano, H. Cifuentes, C. Leiva

An elastoplastic phase field model for fracture in concrete based on a generalized continuum formulation

S. Abrari Vajari, M. Neuner, C. Linder

Modeling concrete at high-loading rates: insights from the Material Point Method

O. A. Oropeza Navarro, J. Platen, A. Chihadeh, M. Kaliske

On the numerical modelling of punching shear in flat reinforced concrete slabs by means of the finite element method

F. Suárez, J. C. Gálvez

Linearity and assessment of micro-scale creep in C-S-H via nanoindentation

J. Nemecek, J. Nemeckova, J. Nemecek

CANCELLED - Fracture behavior of additively manufactured cementitious materials

M. Li, Y.-C. Wu, X. Wang

Characterizing microstructural damage in cementitious composites reinforced with 3D-printed auxetic lattices using X-ray computed tomography

Z. Meng, B. Šavija

Multi-material printing to simultaneously enhance interlayer and flexural performance in 3D concrete printing

F. Teng, J. Ye, J. Yu, Y. Weng

A mesh adaptation algorithm to reduce mesh bias in 2D and 3D crack propagation analysis using cohesive zone models

K. Daadouch, V. Gudžulić, G. Meschke

Greyscale marker for the modeling of the fracture process of cement mortar considering heterogeneity of the microstructure

G. Jaiswal, R. Sharma

Accelerated fracture simulations for the identification of fracture parameters

E. Gultekin, K. Agathos

Phase field fracture in fibre reinforced composites using embedded and virtual elements

G. Pissas, S. P. Triantafyllou

Experimental study on crack distribution of RC members with reinforcing bars coated with fiber reinforced cementitious composites

B. Song, N. Ueda

Mechanical behaviour and 3D fracture morphology of sustainable engineered cementitious composites modified with boron nitride nanoparticles

E. Gurbuz, S. Erdem

On the impact performance and crack behavior of steel-fiber reinforced concrete beams with SHCC and UHPC strengthening layers

F. R. de Souza, J. J. B. d. C. Nunes, V. N. Lima, F. d. A. Silva

Testing and modelling of fibre-matrix interface by microcube splitting

Y. He, S. He, E. Schlangen

X-ray and neutron imaging for steel corrosion in concrete: addressing challenges and revealing opportunities

A. Alhede, J. Dijkstra, K. Lundgren

Use of convolutional neural networks for predicting the short-term creep modulus of cement paste

M. Liang, Y. Gan, E. Schlangen, B. Šavija

Effect of fiber alignment on the mechanical and electrical properties of carbon fiber reinforced cementitious composites

S. Qin, N. Liu, J. Qiu

Monitoring crack propagation at the rock-concrete interface under different strain rates using digital image correlation technology

J. Yao, W. Dong, W. Yuan

Multi-scale damage analysis for concrete using the Scaled Boundary Finite Element Method with High-Performance-Computing

J. Zhang, P. Liu, H. Fan, Z. Li

Wood constitutive law implementation and parameter calibration using Bayesian inversion for finite-element modelling

M. Delage, D. Scantamburlo, G. Jacot-Descombes, S. Commend

Non-intrusive stochastic SBFEM for the uncertainty quantification of Stress Intensity Factors

G. Litainas, S. Triantafyllou, A. Egger, E. Chatzi

Phase field fracture over quadtrees using the Virtual Element Method

I. Chrysikou, S. Triantafyllou

Expertimental study on the contribution of fibers on the punching shear capacity of plain ECC slabs

C. Wu, Y. Su, M. Xu, C. Jin

Self-healing properties of seawater sea-sand strain-hardening cementitious composites (SHCC)

J. Yu, F. Hu

Mechanical properties of low-carbon Engineered Cementitious Composites with limestone and calcined clay under uniaxial cyclic compression

K. Wang, J. Zhou, J. Zhao

CANCELLED - Advancements in modeling compressive fracture in concrete using condensed high aspect ratio interface elements

M. Gimenes, A. F. Villa Dos Santos, E. A. Rodrigues, T. N. Bittencourt, L. A. G. Bitencourt Jr., O. L. Manzoli

CANCELLED - Time-dependent tensile behavior of slag-based alkali activiated concrete

H. J. Bezemer, S. Mustafa, M. Lukovic

Identifying interlayer fracture properties in 3D printed concrete specimens via multidirectional flexural tests

K. S. Kompella, M. Levi, L. Ferrara

Influence of additives on the fracture mechanical properties of reactivated cement paste

A. Z. Gierth, M. Elies, S. Helmich, N. Noel, T. Mielke, D. C. Lupascu

Statistical modeling of fatigue crack growth in geopolymer concrete beams

S. S. Thakur, K. M. Pervaiz Fathima