A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding last name. Select the presentation in the right-hand column to access session and presentation details.
|
|
| Author(s) | Organization(s) | Session |
| A. Hartmann, Markus | Ludwig Boltzmann Institute of Osteology, Austria | Poster session D2 |
| Abaei, Ali Reza | Croívalve, Dublin, Ireland | Poster session A2 |
| Abarca-Ortega, Aldo | Departamento de Ingeniería Mecánica, Universidad de Santiago de Chile, USACH, Santiago de Chile, Chile | Poster session B2 |
| Abdelmohsen, Nour | Bonn University, Germany | Poster session C2 Presenter |
| Abdullah, Muhammad | Khalifa University, United Arab Emirates; Khalifa University, Abu Dhabi, United Arab Emirates | AI and machine learning biomechanics III: Explainable ML & Sensor-driven motion analysis Presenter Poster session B1 Presenter |
| Abel, Richard Leslie | Imperial College London, Department of Surgery and Cancer, London, United Kingdom; MSk Laboratory, Department of Surgery and Cancer, Imperial College London, United Kingdom | Bone biomechanics V: Nanoscale Bone biomechanics V: Nanoscale |
| Abizanda, Gloria | Technological Innovation Division, FIMA, University of Navarra, Spain | Musculoskeletal modeling II: Model personalization for clinical application |
| Abromavicius, Vytautas | Vilnius Gediminas Technical University, Lithuania | Poster session A1 |
| Abutin Mariano, Crystal | University of California Riverside, United States of America | Respiratory biomechanics II: Mechanics-to-Medicine: From cellular insights to predictive models and clinical translation Presenter |
| Achermann, Basil | Institute for Biomechanics, ETH, Zurich, Switzerland; Institute for Data Analysis and Process Design, ZHAW, Zurich, Switzerland | Poster session A1 Sports biomechanics I: Strategies for strength, control, and injury prevention Presenter Sports biomechanics I: Strategies for strength, control, and injury prevention Sports biomechanics II: Elite performance and motion analysis |
| Adachi, Taiji | Kyoto University, Japan | Bone biomechanics I: Structure-function Computational biology I: Computational biology to advance cell biomechanics Soft tissue biomechanics II: Soft tissue remodelling and mechanobiology |
| Adamides, Giorgos | 3AE Health LTD, Cyprus | Poster session C1 |
| Adeeb, Samer | University of Alberta, Canada | Spine biomechanics II: Spinal deformity – Assessment & Modeling |
| Adil, Muhammad Taimoor | The University of Manchester, United Kingdom | AI and machine learning biomechanics II: AI in rehabilitation & human movement Presenter |
| Adomaviciene, Ausra | Vilnius University | Poster session A1 |
| Aggarwal, Ankush | University of Glasgow, United Kingdom | AI and machine learning biomechanics I: Cardiovascular & organ biomechanics Presenter Computational methods for cardiovascular applications II: Patient-specific analyses and procedural planning |
| Aghaei, Ali | Bioengineering, Tissues and Neuroplasticity, UR 7377, University of Paris-Est Creteil, Faculty of Health/EPISEN, Creteil, France | Reproductive, fetal, and neonatal biomechanics II: Mechanobiology of female reproductive and pelvic tissues |
| Agnifili, Mauro Luca | Department of Clinical and Interventional Cardiology, IRCCS Policlinico San Donato, Italy | Cardiovascular biomechanics I |
| Agres, Alison N. | Julius Wolff Institut - BIH Charité Universitätsmedizin Berlin, Germany | Clinical and translational biomechanics I Presenter |
| Ahmed, Daniel | Acoustic Robotics Systems Lab, Institute of Robotics and Intelligent Systems, Department of Mechanical and Process Engineering, ETH Zurich, Switzerland | Implants and devices III: Innovative implant and medical device design |
| Ahn, Jangwhan | Department of Physical Education, Seoul National University, South Korea | Movement & posture I: Assessment technologies and movement analysis in real-world context Presenter |
| Ahn, Jooeun | Department of Physical Education, Seoul National University, South Korea; Institute of Sport Science, Seoul National University, South Korea; Soft Robotics Research Center, Seoul National University, South Korea | Movement & posture I: Assessment technologies and movement analysis in real-world context |
| Ahookhosh, Kaveh | Biomedical MRI, Department of Imaging and Pathology, KU Leuven, Belgium; MEED, iMMC, UCLouvain, Belgium | Respiratory biomechanics II: Mechanics-to-Medicine: From cellular insights to predictive models and clinical translation Presenter |
| Aiyangar, Ameet K. | Empa, Switzerland; Diagnostic, Interventional and Paediatric Radiography, Inselspital, University Hospital, Bern; Laboratories for Mechanical Systems Engineering, EMPA, Dübendorf, Switzerland; Facultad de Artes Liberales, Universidad Adolfo Ibáñez, Viña del Mar, Chile | Joint kinematics & kinetics I: Methodology Biomaterials Poster session C1 |
| Akhavan, Behnam | The University of Sydney, Australia; School of Engineering, Newcastle University, Australia; School of Physics, The University of Sydney, Australia | Cardiovascular implants and devices III: Virtual tools for vascular and extracorporeal therapies |
| Akhlaghi, Parisa | Eindhoven University of Technology, Orthopaedic Biomechanics, Eindhoven, Netherlands; Orthopaedic Biomechanics, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands | 3D bioprinting, additive manufacturing, and scaffolds II: Advanced scaffold fabrication and bioprinting strategies for tissue engineering Spine biomechanics IV: Intervertebral disc - Biomechanics & Degeneration Presenter |
| Akyildiz, Ali | Erasmus MC, The Netherlands; Delft University of Technology, The Netherlands; Department of Cardiology, Biomedical Engineering, Cardiovascular Institute, Thorax Center, Erasmus MC, Rotterdam, the Netherlands; . Department of Biomechanical Engineering, Delft University of Technology, Delft, the Netherlands | Cardiovascular biomechanics VI Computational methods for cardiovascular applications I: Tissue modeling and characterization Poster session D2 |
| Akyildiz, Ali C. | Delft University of Technology, The Netherlands; Erasmus Medical Center, The Netherlands | Cardiovascular biomechanics IV |
| Al-Dirini, Rami M A | Medical Device Research Institute, Flinders University, Australia | Poster session B2 |
| Al-Rub, Rashid K Abu | Advanced Digital & Additive Manufacturing Group, Mechanical & Nuclear Engineering Department, Khalifa University of Science and Technology, Abu Dhabi, UAE. | 3D bioprinting, additive manufacturing, and scaffolds I: Computational design and mechanics of 3D printed scaffolds and soft materials |
| Álamos, Maria Fernanda | Facultad de Ingeniería y Ciencias, Universidad Adolfo Ibáñez, Viña del Mar, Chile | Poster session C1 |
| Alanay, Ahmet | University School of Medicine, Istanbul, Turkey | Spine biomechanics II: Spinal deformity – Assessment & Modeling |
| Albadawi, Muhamed | UCD Centre for Biomedical Engineering, School of Mechanical and Materials Engineering, University College Dublin, Ireland | Poster session A2 |
| Albano, Domenico | IRCCS Istituto Ortopedico Galeazzi, Milan, Italy; Department of Biomedical, Surgical, and Dental Sciences, University of Milan, Milan, Italy | AI and machine learning biomechanics V: Imaging, spine and personalized models |
| Albert, Alina | University Hospital Münster, Germany | Knee biomechanics I: Biomechanical testing Knee biomechanics I: Biomechanical testing Knee biomechanics I: Biomechanical testing Presenter Poster session B2 Poster session B2 |
| Albites-Sanabria, Jose | University of Bologna, Italy | Movement & posture I: Assessment technologies and movement analysis in real-world context Presenter |
| Albites-Sanabria, Jose | Data Analytics & Rehabilitation Technology (DART), Lake Lucerne Institute, Switzerland; Department of Electrical, Electronic and Information Engineering «Guglielmo Marconi», University of Bologna, Bologna, Italy | Poster session C1 |
| Alcaraz, Jordi | Unit of Biophysics and Bioengineering, Department of Biomedicine, School of Medicine and Health Sciences, Universitat de Barcelona, Spain; Thoracic Oncology Unit, Hospital Clinic Barcelona, Spain | Poster session C1 |
| Alcolea-Rodriguez, Victor | CNR-Istituto di Fotonica e Nanotecnologie (CNR-IFN), Italy | Poster session C1 |
| Aldazabal, Javier | Universidad de Navarra, TECNUN Escuela de Ingeniería, San Sebastián, España; Universidad de Navarra, Biomedical Engineering Center, Pamplona, España | Computational biology I: Computational biology to advance cell biomechanics |
| Aldieri, Alessandra | Politecnico di Torino, Italy | Poster session D2 |
| Alesi, Domenico | IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy | Implants and devices III: Innovative implant and medical device design |
| Alessandro, Cristiano | School of Medicine and Surgery, University of Milano-Bicocca, Milan, Italy; Università di Milano-Bicocca, Italy | Movement & posture II: Neuromechanics, motor control and rehabilitation strategies Poster session D1 Rehabilitation engineering, exoskeletons, and assistive devices II: Biomechanics, Prosthetics & Assistive Devices Sports biomechanics I: Strategies for strength, control, and injury prevention |
| Alexander, Nathalie | Children's Hospital of Eastern Switzerland, Switzerland | Clinical and translational biomechanics I Presenter |
| Alinezhadfar, Mohammad | EMPA, Tribology & Surface Analytics, Switzerland | Biomaterials |
| Alipat, Philippe Marguerette Alfeche | University of Leeds, United Kingdom | Spine biomechanics I: Intervertebral disc – Structure & Load Presenter |
| Alizadeh, Elham | Universitat Pompeu Fabra, Spain; Universitat Pompeu Fabra (UPF), Spain | Bone biomechanics III: Image-based FE Presenter Poster session D2 |
| Alkalay, Ron | Department of Orthopedic Surgery, Center for Advanced Orthopedic Studies, Beth Israel Deaconess Medical Center and Harvard Medical School, Boston, USA | Poster session A1 Presenter |
| Alkalay, Ron Noah | Beth Israel Deaconess Medical Center, United States | AI and machine learning biomechanics V: Imaging, spine and personalized models |
| Alkalay, Ron, Noah | Isomics Inc, MA, USA | AI and machine learning biomechanics V: Imaging, spine and personalized models Presenter |
| Allahdiniyan, Anis | Trinity College Dublin, Ireland | Bone biomechanics V: Nanoscale Presenter |
| Allain, Jean-Marc | LMS, Ecole Polytechnique, CNRS, Institut Polytechnique de Paris, France; Inria, France | Ocular biomechanics Presenter |
| Allegri, Lorenzo | University of Florence, Italy | Poster session D1 |
| Allione, Federico | Empa, UZH, Macquarie University, Switzerland | Animal biomechanics |
| Allison, George | School of Mechanical, Aerospace & Civil Engineering, University of Sheffield, United Kingdom; INSIGNEO Institute, University of Sheffield, United Kingdom | Musculoskeletal biomechanics II: Modelling & simulations Presenter |
| Alm, Jessica | University of Turku, Finland | Hip biomechanics |
| Almeida, Rita | University of Aveiro (UA), Portugal | 3D bioprinting, additive manufacturing, and scaffolds I: Computational design and mechanics of 3D printed scaffolds and soft materials |
| Alminnawi, Ahmad | GIGA In Silico Medicine, University of Liège, Belgium; Skeletal Biology and Engineering Research Center, KU Leuven, Belgium | Poster session B2 |
| Almutairi, Salman | School of Medicine and Population Health, University of Sheffield, United Kingdom | Musculoskeletal biomechanics II: Modelling & simulations |
| Alqhtani, Raee S. | Najran University, Saudi Arabia | Poster session A1 |
| Alsheghri, Ammar | Interdisciplinary Research Center for Biosystems and Machines, King Fahd University of Petroleum and Minerals (KFUPM), Saudi Arabia; Mechanical Engineering Department, KFUPM, SA | 3D bioprinting, additive manufacturing, and scaffolds I: Computational design and mechanics of 3D printed scaffolds and soft materials |
| Alshehhi, Aamna | Khalifa University, United Arab Emirates | AI and machine learning biomechanics III: Explainable ML & Sensor-driven motion analysis |
| Alves, Nuno | Department of Veterinary Clinics, School of Medicine and Biomedical Sciences (ICBAS), University of Porto (UP), Portugal; Center for Animal Science Studies (CECA), Institute of Sciences, Technologies and Agro-Environment of the University of Porto (ICETA), Portugal; Associate Laboratory for Animal and Veterinary Science (AL4AnimalS), Lisboa, Portugal; Centre for Rapid and Sustainable Product Development, Polytechnic of Leiria, Portugal; Associate Laboratory for Advanced Production and Intelligent Systems (ARISE), Porto, Portugal | ON Orthoregeneration Award ON Orthoregeneration Award |
| Alvites, Rui | Department of Veterinary Clinics, School of Medicine and Biomedical Sciences (ICBAS), University of Porto (UP), Portugal; Center for Animal Science Studies (CECA), Institute of Sciences, Technologies and Agro-Environment of the University of Porto (ICETA), Portugal; Associate Laboratory for Animal and Veterinary Science (AL4AnimalS), Lisboa, Portugal; University Institute of Health Sciences (CESPU), Portugal; Centro de Estudos de Ciência Animal, (ICETA), Porto, Portugal; Departamento de Clínicas Veterinárias, (ICBAS), Universidade do Porto, Porto, Portugal; Cooperativa de Ensino Superior Politécnico e Universitário (CESPU), Porto, Portugal | ON Orthoregeneration Award ON Orthoregeneration Award |
| Amado, Pedro | ARTORG Center for Biomedical Engineering Research, University of Bern, Switzerland | Implants and devices III: Innovative implant and medical device design Presenter |
| Amado, Sandra | Centre for Rapid and Sustainable Product Development, Polytechnic of Leiria, Portugal; Associate Laboratory for Advanced Production and Intelligent Systems (ARISE), Porto, Portugal | ON Orthoregeneration Award |
| Amaveda, Hippolyte | Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC and University of Zaragoza | Tissue engineering |
| Amicone, Alessio | ETH Zurich, Institute for Biomechanics, Zurich, Switzerland | 3D bioprinting, additive manufacturing, and scaffolds II: Advanced scaffold fabrication and bioprinting strategies for tissue engineering Presenter |
| Amini, Hassan | School of Mechanical Engineering, College of Engineering, University of Tehran, Iran | AI and machine learning biomechanics IV: Joint, bone & musculoskeletal modeling Presenter |
| Amis, Andrew | Imperial College London, United Kingdom | Shoulder biomechanics II: Glenohumeral biomechanics and arthroplasty |
| Amon, Cristina H. | University of Toronto, Canada | Cardiovascular biomechanics III |
| Amorim, Irina | Department of Molecular Pathology and Immunology, ICBAS, Portugal; Institute for Research and Innovation in Health (i3S), UP, Portugal; Institute of Molecular Pathology and Immunology, University of Porto (IPATIMUP), Portugal | ON Orthoregeneration Award |
| Amrein, Sabrina | Swiss Paraplegic Research, Switzerland; Health Science & Technology, ETH, Switzerland | Shoulder biomechanics I: Shoulder musculature, kinematics and subject specific modelling |
| Ananth Swaminathan, Siddarth | Charité – Universitätsmedizin Berlin, Germany | Poster session A1 Presenter |
| Anbalagan, Vijayasankar | KU Leuven, Belgium | Bone biomechanics II: Whole bone |
| Anderes, Loïc | University of Bern | Musculoskeletal modeling III: Bone & spine biomechanics |
| Andersen, Michael Skipper | Aalborg University, Department of Materials and Production, Aalborg, Denmark | Musculoskeletal modeling III: Bone & spine biomechanics |
| Andersen, Olaf | Fraunhofer IFAM, Dresden, Germany | Poster session D1 |
| Anderson, Dennis | Isomics Inc, MA, USA | AI and machine learning biomechanics V: Imaging, spine and personalized models |
| Andrae, Jonathan | Department of Neurology and Neurophysiology, University of Freiburg, Freiburg im Breisgau, Germany | Poster session A2 |
| André, Julian | Arthrex GmbH, Germany | Knee biomechanics I: Biomechanical testing Presenter |
| Andres, Annchristin | Saarland University, Applied Mechanics, Germany; Saarland University, Applied Mechanics, Saarbrücken, Germany | Poster session B2 Presenter Poster session D1 |
| Andrews, Rebecca | The University of Sheffield, United Kingdom | Mechanobiology II: Bone mechanobiology |
| Andriotis, Orestis G. | Institute of Lightweight Design and Structural Biomechanics, TU Wien, Austria; Technische Universität Wien, Austria | Poster session B2 Poster session D2 Soft tissue biomechanics III: Numerical modelling of soft tissue mechanics |
| Andrzejak, Ralph Gregor | Univ. Pompeu Fabra, Department of Engineering, Barcelona, Spain | Poster session D1 |
| Angelini, Elsa D. | LTCI, Télécom Paris, Institut Polytechnique de Paris, France | AI and machine learning biomechanics IV: Joint, bone & musculoskeletal modeling |
| Angeloni, Debora | Scuola Superiore Sant’Anna, Pisa, Italy | Mechanobiology III: Mechanobiology in cancer research |
| Angermann, Christoph | VASCage -Centre on Clinical Stroke Research, Austria | Poster session D1 |
| Angers, Michèle | Division of Orthopedic Surgery, Department of Surgery, CHU de Québec-Université Laval, Quebec City, Canada | Poster session B2 |
| Anglese, Serena | 3D and Computer Simulation Laboratory (C3Dlab), IRCCS Policlinico San Donato, Italy | Cardiovascular biomechanics I Poster session C1 |
| Anthonijsz, Lyana | Delft University of Technology, The Netherlands | Poster session D2 |
| Antonacci, Giuseppe | Specto Photonics, Italy | Poster session C1 |
| Aparici, Alejandro | Aragon Institute of Engineering Research (I3A), University of Zaragoza, Spain | Poster session A2 |
| Aparici-Gil, Alejandro | Aragón Institute for Engineering Research (I3A), University of Zaragoza Spain | Poster session D2 |
| Aparicio Yuste, Raúl | Interfaculty Institute of Microbiology and Infection Medicine, Cluster of Excellence “Controlling Microbes to Fight Infections” (CMFI, EXC 2124), University of Tübingen, German | Computational biology I: Computational biology to advance cell biomechanics |
| APICELLA, ANGELA | Information Engineering Department, University of Padova, Italy | Computational methods for cardiovascular applications II: Patient-specific analyses and procedural planning |
| Appenzeller, Tobias | ARTIDIS, Switzerland; Artidis AG, Basel, Switzerland | Clinical and translational biomechanics II Poster session C1 Poster session C1 Poster session C1 |
| Appleyard, Richard | Faculty of Medicine, Health and Human Sciences, Macquarie University, Australia | Musculoskeletal modeling I: Joint mechanics |
| Appruzese, Roberto | Zurich University of Applied Sciences ZHAW, Winterthur | Poster session D2 |
| Aquino, Domenico | Neuroradiology Unit, Fondazione IRCCS Istituto Neurologico Carlo Besta, Milano, Italy | Biomedical imaging I: Advanced imaging techniques |
| Aragón-Basanta, Elisa | Universitat Politècnica de València | Knee biomechanics II: Kinematics & kinetics Presenter |
| Arana, Estanislao | Fundación Instituto Valenciano de Oncología, Spain | Poster session A1 Poster session D2 |
| Aranda, Joan | Universitat Politècnica de Catalunya, Spain | Musculoskeletal modeling II: Model personalization for clinical application |
| Arauz, Paul | Stony Brook University, United States of America | Poster session A1 |
| Arefin, Amit | Texas Tech University, USA | Poster session D1 |
| Areias, Bruno | INEGI, Portugal | Poster session B1 |
| Argunsah, Hande | Acibadem Mehmet Ali Aydinlar University, Turkiye | AI and machine learning biomechanics IV: Joint, bone & musculoskeletal modeling |
| Arieira, Ana | CMEMS – Center for Microelectromechanical Systems, University of Minho, Guimarães, Portugal | Poster session A1 Presenter |
| Ariza Gracia, Miguel Angel | ARTORG Center, University of Bern, Switzerland | Ocular biomechanics Presenter |
| Arjmand, Navid | Sharif University of Technology, Tehran, Iran; Sharif University of Technology, Iran, Islamic Republic of | Poster session B1 Spine biomechanics I: Intervertebral disc – Structure & Load |
| Armbruster, Jonas | BG Klinik Ludwigshafen, Germany | Clinical and translational biomechanics II |
| Arnegger, Andreas | OSORA medical GmbH, Germany | Clinical and translational biomechanics II Presenter |
| Arnet, Ursina | Swiss Paraplegic Research, Switzerland | Shoulder biomechanics I: Shoulder musculature, kinematics and subject specific modelling |
| Arnone, Claudio | MICROTECH srl, Palermo, Italy | Tissue engineering |
| Aro, Hannu | University of Turku, Finland | Hip biomechanics Presenter |
| Arora, Hari | Biomedical Engineering Simulation and Testing (BEST) Lab, Swansea University, United Kingdom | Poster session D1 Presenter |
| Arroyo, Marino | Universitat Politècnica de Catalunya-BarcelonaTech, Spain; Institute for Bioengineering of Catalonia (IBEC), Spain; Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE), Spain | Mechanobiology I: Cell level |
| Arshakyan, Marselina | Unit of Biophysics and Bioengineering, Department of Biomedicine, School of Medicine and Health Sciences, Universitat de Barcelona, Spain | Poster session C1 |
| Arts, Chris | Technical University Eindhoven, The Netherlands; Maastricht University Medical Centre, The Netherlands | Spine biomechanics II: Spinal deformity – Assessment & Modeling |
| Arts, J. J. Chris | Eindhoven University of Technology, Netherlands; Maastricht University Medical Center+, Netherlands | Poster session A1 Poster session D2 |
| Arts, Jacobus J.C | Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands | Poster session D2 |
| Aryeetey, Othniel | Karl Landsteiner University of Health Sciences, Department of Anatomy and Biomechanics, Division Biomechanics, Krems, Austria | Poster session D2 |
| Arzani, Amirhossein | University of Utah, Salt Lake City, Utah, USA | Poster session A2 |
| Asgari, Pegah | Erasmus MC, The Netherlands | Cardiovascular biomechanics VI |
| Ashkenazi, Amit | Technion Israel Institute of Technology, Israel | 3D bioprinting, additive manufacturing, and scaffolds III: Mechanics and multiscale characterization of biomimetic scaffolds for bone tissue engineering |
| Ashofteh, Alireza | Laboratoire de Physique de l'Ecole Normale Supérieure, UMR CNRS 8023, Paris, 75005, France; Laboratoire d'Imagerie Biomédicale, Sorbonne Université, UMR CNRS 7371, Paris, 75006, France | Biomaterials Presenter |
| Ashok, Deepu | The University of Sydney, Australia; Faculty of Medicine and Health, School of Medical Science, The University of Sydney, Australia | Cardiovascular implants and devices III: Virtual tools for vascular and extracorporeal therapies |
| Ashri, Saar | The Institute of Military Physiology, The Israel Defense Forces (IDF) Medical Corps, Israel | Musculoskeletal biomechanics I: Experimental approaches |
| Aslan, Bulent | EBATINCA, S.L, Las Palmas de Gran Canaria, Spain | AI and machine learning biomechanics V: Imaging, spine and personalized models |
| Aslanidou, Lydia | Laboratory of Hemodynamics and Cardiovascular Technology, EPFL, Switzerland | Computational methods for cardiovascular applications II: Patient-specific analyses and procedural planning |
| Asmar, Maria | Faculty of Medicine, Saint Joseph University of Beirut, Beirut, Lebanon | Poster session B2 Poster session B2 |
| Aspelund, Thor | The Icelandic Heart Association, Iceland; University of Iceland, Iceland | Clinical and translational biomechanics I |
| Assi, Ayman | Faculty of Medicine, Saint Joseph University of Beirut, Beirut, Lebanon; Institut de Biomecanique Humaine Georges Charpak, Arts et Metiers, Paris, France | Joint kinematics & kinetics II: In the setting of musculoskeletal pathologies Presenter Poster session B2 Presenter Poster session B2 Presenter Spine biomechanics III: Spinal disorders biomechanics |
| Astolfi, Laura | Department of Neurosciences, University of Padua, Italy | Poster session D1 |
| Astori, Davide | Politecnico di Milano, Italy | AI and machine learning biomechanics I: Cardiovascular & organ biomechanics Presenter Computational methods for cardiovascular applications III: CFD/FSI and arteries |
| Atayde, Luís | Department of Veterinary Clinics, School of Medicine and Biomedical Sciences (ICBAS), University of Porto (UP), Portugal; Center for Animal Science Studies (CECA), Institute of Sciences, Technologies and Agro-Environment of the University of Porto (ICETA), Portugal; Associate Laboratory for Animal and Veterinary Science (AL4AnimalS), Lisboa, Portugal | ON Orthoregeneration Award |
| Athwal, George | The Roth McFarlane Hand and Upper Limb Centre, St. Joseph's Hospital, Canada; Roth|McFarlance Hand and Upper Limb Centre, Canada | Biomedical imaging II: AI and medical image analysis Poster session C1 |
| Attar, Shoaib | Department of Biomedical Engineering, Lund University, Sweden | Hip biomechanics Presenter |
| Audenino, Alberto Luigi | PolitoBIOMed Lab and Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Italy | Tissue engineering Cardiovascular implants and devices I: Engineering next-generation endovascular devices |
| Auer, Timo A. | Department of Radiology, Charité – Universitätsmedizin Berlin, Germany | Poster session D2 |
| Augat, Peter | Institute for Biomechanics, BGU Unfallklinik Murnau gGmbH, Murnau, Germany; Institute for Biomechanics, Paracelsus Medical University, Austria | Bone biomechanics II: Whole bone Bone biomechanics II: Whole bone Presenter Musculoskeletal biomechanics II: Modelling & simulations |
| Augusto, António | LAETA, INEGI, FEUP, Portugal | 3D bioprinting, additive manufacturing, and scaffolds IV: 3D Printed implants and functional devices: From osseointegration to biomechanical performance |
| Auricchio, Ferdinando | Civil Engineering and Architecture Department, Pavia University, Pavia, Italy | Cardiovascular biomechanics II |
| Avrahami, Idit | Dep. Mechanical Eng. and Mechatronics, Ariel University, Israel. | Poster session A2 |
| Avril, Stéphane | École des Mines de Saint-Étienne, University of Lyon, Inserm, Sainbiose U1059, France; Mines Saint-Étienne, Sainbiose INSERM 1059, France | Cardiovascular biomechanics II Poster session A2 |
| Avril, Stèphane | Mines Saint-Etienne, University of Lyon, Saint-Priest-en-Jarez, France | Computational methods for cardiovascular applications I: Tissue modeling and characterization |
| Awad, Guy | Faculty of Medicine, Saint Joseph University of Beirut, Beirut, Lebanon | Poster session B2 |
| Axford, David T. | Faculty of Medicine, Health and Human Sciences, Macquarie University, Australia; Dept of Mechanical and Materials Engineering, Western University, Canada | Musculoskeletal modeling I: Joint mechanics |
| Ayala, Guillermo | Universitat de València | Knee biomechanics II: Kinematics & kinetics |
| Ayechu Abendaño, Ada | Empa, Switzerland | Joint kinematics & kinetics I: Methodology Presenter |
| Ayechu Abendaño, Ada | Public University of Navarre (UPNA), Spain | Implants and devices III: Innovative implant and medical device design |
| Ayers, Brian C. | Massachusetts General Hospital, Harvard Medical School, United States of America | AI and machine learning biomechanics I: Cardiovascular & organ biomechanics |
| Azar, Joe | Faculty of Medicine, Saint Joseph University of Beirut, Beirut, Lebanon | Poster session B2 |
| Azarine, Arshid | Hopital Marie Lannelongue, Groupe Hospitalier Paris Saint-Joseph, Le Plessis Robinson, France | Cardiovascular implants and devices II: Computational hemodynamics in stent and valve engineering |
| Azhar, Muhammad | University of Manchester, UK | Cardiovascular biomechanics VI Presenter |