A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding last name. Select the presentation in the right-hand column to access session and presentation details.
|
|
| Author(s) | Organization(s) | Session |
| A, Ricardo | TEMA - Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, Campus Universitário de Santiago, University of Aveiro, 3810-193 Aveiro, Portugal; LASI - Intelligent Systems Associate Laboratory, Portugal | Poster sessions |
| A. Sharbafi, Maziar | Lauflabor Locomotion Laboratory, Institute of Sport Science, TU Darmstadt, Germany | Poster sessions |
| Abarca, Aldo | Laboratory of Biomechanics and Biomaterials, University Santiago of Chile, Chile | Poster sessions |
| Abarca-Ortega, Aldo | Center for Biomedical Technology, Universidad Politécnica de Madrid, Spain; Departamento de Ciencia de Materiales, Universidad Politécnica de Madrid, Spain; Departamento de Ingeniería Mecánica, Universidad de Santiago de Chile, Chile | Mechanobiology I: Soft tissue and cartilage Presenter |
| Abbott, Mandy | Glasgow Caledonian University, Glasgow, Scotland | Poster sessions |
| Abd Razak, Norazian Binti | Imperial College London, United Kingdom | Orthopaedic implants and devices III: Lower limb devices Presenter Poster sessions Presenter |
| Abdel-Raouf, Yousof M.A. | IBiTech-BioMMedA, UGent, Belgium | Computational methods in tissue mechanics I Presenter Poster sessions |
| Abdullah, Muhammad | Khalifa University, United Arab Emirates. | Poster sessions Musculoskeletal biomechanics V: Spine and Cranium |
| Abeni, Nicola | University of Brescia, Italy | Human movement II: Clinical applications Presenter |
| Aboian, Edouard | Yale School of Medicine, New Haven, USA; Department of Surgery, Yale School of Medicine, New Haven, CT, USA | Cardiovascular biomechanics IV: Tissue engineering - misc. Poster sessions |
| Abou Karam, Maher | Arts et Metiers Institute of Technology, IBHGC, 151 bd de l’Hôpital, 75013, Paris, France | Soft tissue biomechanics VI: Skin pressure ulcers |
| Abouzaid, Khaoula | CNRS, MSME, France | Poster sessions |
| Accardo, Agostino | University of Trieste, Italy | Sports biomechanics I: From injury prevention to full body modelling |
| Acciaioli, Alice | IRCCS Istituto Ortopedico Rizzoli, Italy | Hard tissue biomechanics IV |
| Acevedo, Claire | Department of Mechanical and Aerospace Engineering, University of California San Diego, USA | Poster sessions |
| Adachi, Taiji | Kyoto University, Japan | Cellular and molecular biomechanics I: Cell-cell and cell microenvironment interactions Computational biology I Computational biology I Hard tissue biomechanics I |
| Adamopoulos, Dionysios | Hopitaux Universitaires de Genève (HUG) et Université de Genève, Switzerland | Poster sessions |
| Adani, Roberto | Dipartimento di chirurgia e microchirurgia della mano, Policlinico di Modena, Italy | Additive manufacturing for biomechanics II: Applications in biomedical and tissue engineering |
| Adler, Ina | Laboratory for Biomechanics, Ostbayerische Technische Hochschule Regensburg, Regensburg, Germany; OTH Regensburg, Germany | Reproductive biomechanics I Reproductive biomechanics I Presenter |
| Adlhart, Christian | Institute of Chemistry and Biotechnology, Zurich University of Applied Sciences, Switzerland; Institute of Chemistry and Biotechnology, School of Life Sciences and Facility Management, Zurich University of Applied Sciences, Switzerland | Poster sessions Soft tissue biomechanics III: Soft tissues |
| Affenzeller, Nadja | University of Veterinary Medicine Vienna, Austria | Animal and plant biomechanics |
| Agafonov, Andrey | Bakulev National Medical Research Center For Cardiovascular Surgery, Russian Federation | Poster sessions |
| Agbanyim, Dennis C. | ETH Zurich, Switzerland | Musculoskeletal biomechanics II: Upper Extremity Presenter |
| Aggarwal, Anksuh | Glasgow Computational Engineering Centre, University of Glasgow; University of Glasgow, United Kingdom; University of Glasgow, Glasgow, United Kingdom | Cardiovascular implants and devices III: Stents and balloons Computational methods for cardiovascular applications II Data driven healthcare and machine learning in biomechanics Presenter Poster sessions Presenter Poster sessions Poster sessions Poster sessions |
| Aghapour, Masoud | University of Veterinary Medicine Vienna, Austria | Animal and plant biomechanics |
| Agrafiotis, Emmanouil | Department of Biomedical Engineering, University of Michigan, USA | Cardiovascular biomechanics II: Large vessel biomechanics II |
| Ahluwalia, Arti | University of Pisa, Italy; 3R Centre, Italy | Biomaterials II: Polymers, gels and cells Poster sessions Respiratory biomechanics Soft tissue biomechanics III: Soft tissues |
| Ahmad Sharbafi, Maziar | TU Darmstadt; Lauflabor Locomotion Laboratory, Centre for Cognitive Science, Technical university Darmstadt, Germany | Poster sessions Poster sessions |
| Ahmadi, Reza | Sharif University of Technology, Iran, Islamic Republic of | Poster sessions |
| Ahmadi, S.M. | Amber Implants BV, Prinses Margrietplantsoen 33, 2595 AM, The Hague, The Netherlands | Orthopaedic implants and devices II: Fracture treatment and bone substitutes |
| Ahmed, Maimoona | Fernadez Hospitals, Fernandez Foundation, India | Reproductive biomechanics II |
| Ahn, Chulhyun | Geisinger Medical Center, United States of America | Poster sessions |
| Aiani, Luca | Centro Medico SME, Italy | Poster sessions |
| Aïssa-El-Bey, Abdeldjalil | IMT Atlantique, UMR CNRS 6285, Lab-STICC, Brest, France | Data driven healthcare and machine learning in biomechanics |
| Aissaoui, Rachid | École de Technologie Supérieure, Canada | Poster sessions |
| Ait-Ali, Lamia | Institute of Clinical Physiology, CNR, Italy | Computational methods for cardiovascular applications I |
| Akbarzadeh Khorshidi, Majid | Trinity College Dublin, Ireland | Poster sessions Presenter |
| Akhmetshina, Tatiana | Laboratory of Metal Physics and Technology, Department of Materials, ETH Zurich | In vivo measurements and sensors in clinical biomechanics |
| Akrami-Hasan-Kohal, Mohammad | ICGM, CNRS, ENSCM, Université Montpellier, Montpellier, France | Cardiovascular implants and devices III: Stents and balloons |
| Akyildiz, Ali | Department of Biomedical Engineering, Erasmus Medical Center, Rotterdam, the Netherlands; Department of Biomechanical Engineering, Delft University of Technology, Delft, the Netherlands | Cardiovascular biomechanics I: Large vessel biomechanics I Cardiovascular biomechanics V: Cerebral perfusion-clotting Poster sessions |
| Alabdah, Fahad | The University of Manchester, United Kingdom; The University of Hail, Saudi Arabia | Poster sessions Presenter Tissue engineering II: Musculoskeletal System I |
| Alaimo, Gianluca | Department of Civil Engineering and Architecture, University of Pavia, Pavia, Italy | Ocular biomechanics |
| Alaman-Diez, Pilar | University of Zaragoza, Spain | Tissue engineering I: Cardiovascular System, Tumors & Perfusion |
| Alarcon Rueda, Laura | Friedrich-Alexander-Universität Erlangen-Nürnberg, Institute of Applied Dynamics, Germany | Clinical applications and translational research |
| Alazmani, Ali | University of Leeds, United Kingdom | Musculoskeletal biomechanics V: Spine and Cranium |
| Albert, Alina | University Clinic Muenster, Germany | Musculoskeletal biomechanics VIII: Musculoskeletal modelling whole body II - |
| ALBLOWI, Abdulrahman | Department of Vascular Surgery, Nancy University Hospital, INSERM UMR_S 1116 DCAC, University of Lorraine, France; College of Medicine, Imam Abdulrahman Bin Faisal University, Dammam, Saudi Arabia. | Poster sessions Presenter |
| Aldazabal, Javier | University of Navarra, TECNUN School of Engineering, San Sebastian, 20018, Spain; University of Navarra, Biomedical Engineering Center, Campus Universitario, Pamplona, 31080, Spain | Poster sessions |
| Aldieri, Alessandra | PolitoBIOMed Lab, Dept. of Mechanical and Aerospace Engineering, Politecnico di Torino, Italy; PolitoBIOMed Lab, Politecnico di Torino, Italy | Computational methods for cardiovascular applications V Computational methods for orthopaedic applications III Hard tissue biomechanics I Presenter Poster sessions |
| Alduini, Pietro | Hospital of Saint Luca, Italy | Soft tissue biomechanics II: Constitutive modelling |
| Alesi, Domenico | IRCCS Istituto Ortopedico Rizzoli, Bologna, IT; IRCCS Rizzoli Orthopedic Institute, Bologna, Italy | Orthopaedic implants and devices III: Lower limb devices Poster sessions |
| Alexander, Daniel | University College London, United Kingdom | Reproductive biomechanics II |
| Alexander, Nathalie | Chilren's Hospital of Eastern Switzerland, Switzerland | Human movement II: Clinical applications Presenter |
| Alhamoudi, Fahad H | King Khalid University, Saudi Arabia | Poster sessions Presenter |
| Alì, Marco | Bracco Imaging S.p.A., Italy | Computational methods for cardiovascular applications V |
| Alijani, Hamid | Biomedical Engineering and Biomechanics Research Centre, School of Engineering, College of Science and Engineering, University of Galway, Galway, Ireland. | Hard tissue biomechanics IV Presenter |
| Alinezhadfar, Mohammad | EMPA, Tribology & Surface Analytics, Switzerland | Biomaterials II: Polymers, gels and cells |
| Alipat, Philippe Marguerette Alfeche | University of Leeds, United Kingdom | Poster sessions Presenter |
| Aliseda, Alberto | University of Washington, United States of America; Department of Mechanical Engineering, University of Washington, Seattle, USA | Cardiovascular biomechanics V: Cerebral perfusion-clotting Presenter Cardiovascular implants and devices I: Life support systems and vascular access Cardiovascular implants and devices III: Stents and balloons |
| Alkalay, Ron | Beth Israel Deaconess Medical Center, United States of America | Computational methods for orthopaedic applications II Presenter |
| Alkhalaileh, Abdelsalam Tareq | Khalifa University, United Arab Emirates. | Poster sessions |
| Alkjær, Tine | The Parker Institute, Bispebjerg-Frederiksberg Hospital, Copenhagen, Denmark; Department of Biomedical Sciences, University of Copenhagen, Copenhagen, Denmark | Poster sessions |
| Allain, Jean-Marc | LMS, CNRS, École Polytechnique, Institut Polytechnique de Paris, France; Inria, France | Ocular biomechanics Soft tissue biomechanics IV: Eye, Brain, Pancreas, Breast, Fascia Presenter |
| Allegrini, Davide | Department of Biomedical Sciences, Humanitas University, Milan, Italy; Department of Ophthalmology, Humanitas Gavazzeni–Castelli, Bergamo, Italy | Ocular biomechanics |
| Allison, George | Department of Mechanical Engineering, University of Sheffield, United Kingdom; Insigneo Institute for in silico Medicine, University of Sheffield, UK | Computational methods for orthopaedic applications II Presenter Poster sessions Presenter |
| Allison, Hollie | University of Galway, Ireland | Poster sessions |
| Alloisio, Marta | KTH Royal Institute of Technology, Sweden | Cardiovascular biomechanics II: Large vessel biomechanics II Presenter |
| Almeida, Jorge | Faculty of Engineering, University of Porto, Portugal | Reproductive biomechanics II |
| ALOKLA, EISA | TU Darmstadt | Poster sessions Presenter |
| Alsaadi, Ola | University of Denver, United States of America | Computational methods for orthopaedic applications II |
| Alsayed, Khalid | King Abdulaziz University | Poster sessions Presenter |
| Alshammari, Adel | The University of Manchester, United Kingdom; The University of Hail, Saudi Arabia; Medical Engineering Research Group, School of Engineering, University of Manchester, UK | Poster sessions Poster sessions Tissue engineering II: Musculoskeletal System I Presenter |
| Altai, Zainab | School of Sport, Rehabilitation and Exercise Sciences, University of Essex, UK | Poster sessions Presenter |
| Althahabi, Abdel Rahman N. | Department of Mechanical Engineering, Politecnico di Milano, Via La Masa 1, I-20156 Milano, Italy | Orthotics and prosthetics |
| Altun, Abdulaziz | University of Exeter, United Kingdom | Poster sessions Presenter |
| Altundemir, Sercan | Department of Chemical Engineering, Boğaziçi University, Turkey | Poster sessions Presenter |
| Álvarez-López, Aroa | Center for Biomedical Technology, Universidad Politécnica de Madrid, Spain; Departamento de Ciencia de Materiales, Universidad Politécnica de Madrid, Spain | Mechanobiology I: Soft tissue and cartilage |
| Alves, Ines | School of Health and Human Development, CHRC, Évora University, Évora, Portugal | Poster sessions Presenter |
| Alves, Nuno | CDRSP, Polytechnic of Leiria, Portugal; CDRSP-Centre for Rapid and Sustainable Product Development, Polytechnic of Leiria; LAETA, CECA-ICETA, All4Animals, ICBAS, Universidade do Porto, Portugal | Additive manufacturing for biomechanics I: Advanced computational and experimental techniques Poster sessions Poster sessions |
| AMEDEE, Joelle | Laboratoire BIOTIS, Inserm U1026, Université de Bordeaux | Tissue engineering I: Cardiovascular System, Tumors & Perfusion |
| Américo de Almeida, Mateus | Mines Saint-Etienne, INSERM, U 1059 Sainbiose, F - 42023, Saint-Etienne, France. | Soft tissue biomechanics II: Constitutive modelling Presenter |
| Amicone, Alessio | ETH Zurich, Institute for Biomechanics, Zurich, Switzerland | Biomaterials I: Biomaterials for musculoskeletal tissues Presenter |
| Amini, Shahrouz | Max Planck Institute of Colloids and Interfaces, Germany | Hard tissue biomechanics III |
| Amraish, Nedaa | Division Biomechanics, Karl Landsteiner University for Health Sciences, Austria | Poster sessions |
| Anacleto, Carlos | TEMA, Department of Mechanical Engineering, university of Aveiro, Portugal | Poster sessions |
| Anandan, Aravind | 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246, France; SEGULA Engineering, Vénissieux, France | Cellular and molecular biomechanics I: Cell-cell and cell microenvironment interactions Presenter |
| Ananth Swaminathan, Siddarth | Julius Wolff Institute, Berlin Institute of Health at Charité – Universitätsmedizin Berlin, Germany | Computational methods for orthopaedic applications III Presenter |
| Andersen, Michael Skipper | Aalborg University, Denmark; Center for Mathematical Modeling of Knee Osteoarthritis, Aalborg, Denmark | Computational methods in tissue mechanics III Musculoskeletal biomechanics III: Musculoskeletal modelling whole body I - Poster sessions Soft tissue biomechanics I: Knee & cartilage |
| Anderson, Calum | Institute of Mechanical, Process and Energy Engineering, Heriot-Watt University, Edinburgh, United Kingdom | Computational methods in tissue mechanics I Presenter |
| Anderson, Dennis Earl | Beth Israel Deaconess Medical Center, United States; Harvard Medical School, United States | Musculoskeletal biomechanics V: Spine and Cranium |
| Andres, Annchristin | Saarland University, Applied Mechanics, Germany | Poster sessions Poster sessions Presenter |
| Andrews, Rebecca | Division of Clinical Medicine, School of Medicine and Population Health, University of Sheffield, UK; Sheffield Teaching Hospitals, Royal Hallamshire Hospital NHS Foundation Trust, Sheffield, UK | Hard tissue biomechanics II |
| Andriotis, Orestis G. | TU Wien | Hard tissue biomechanics IV Mechanobiology I: Soft tissue and cartilage Soft tissue biomechanics I: Knee & cartilage |
| Angeli, Panagiota | ThAMes, Department of Chemical Engineering, University College London, London, UK | Dental biomechanics |
| Angeli, Thomas | TU Wien, Austria | Ergonomics and occupational biomechanics + humanoid robotics and mechatronics |
| Angeloni, Livia | Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, Netherlands; Institute for Complex Molecular Systems (ICMS), Eindhoven University of Technology, Eindhoven, Netherlands | Cellular and molecular biomechanics II: Single cell and intracellullar mechanics Mechanobiology III: Bone - cell level Presenter Poster sessions |
| Anglese, Serena | IRCCS Policlinico San Donato, Italy | Computational methods for cardiovascular applications II Poster sessions |
| Ansoms, Pieter | Biomechanics section, KU Leuven, Leuven, Belgium; KU Leuven, Belgium | Computational methods in tissue mechanics III Presenter Poster sessions |
| Antaki, James F | Meinig School of Biomedical Engineering, Cornell University, USA | Cardiovascular implants and devices IV: Implants and blood interaction |
| Anton-Arnal, Jaime | LadHyX, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France | Cellular and molecular biomechanics I: Cell-cell and cell microenvironment interactions |
| Antoni, Alessandro | Depth of Industrial Engineering, University of Bologna | Poster sessions |
| Aoife, Healy | Centre for Biomechanics and Rehabilitation Technologies, Staffordshire University, | Orthotics and prosthetics |
| Aout, Thomas | Laboratoire IRISSE, Le Tampon, La Réunion (France) | Human movement I: Methodology Presenter |
| Aparici-Gil, Alejandro | Aragón Institute for Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain | Computational methods in tissue mechanics III Presenter |
| Aparicio-Yuste, Raul | Multiscale in Mechanical and Biological Engineering (M2BE), University of Zaragoza, Spain; Interfaculty Institute of Microbiology and Infection Medicine, Cluster of Excellence “Controlling Microbes to Fight Infections” (CMFI, EXC 2124), University of Tübingen, Germany | Mechanobiology I: Soft tissue and cartilage Presenter |
| Appleyard, A/Prof. | Faculty of Medicine, Health and Human Sciences, Macquarie University, Sydney, Australia | Musculoskeletal biomechanics II: Upper Extremity |
| Araz, Matthew | Hertie Institute for Clinical Brain Research, University of Tübingen, Germany; Institute for Modelling and Simulation of Biomechanical Systems, University of Stuttgart, Germany | Poster sessions Presenter |
| Areias, Bruno | INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering | Poster sessions |
| Arens, Daniel | AO Research Institute Davos, Switzerland | In vivo measurements and sensors in biomechanics |
| Arensmann, Andrea | University of Münster, Germany | Poster sessions Presenter |
| Arjmand, Navid | Sharif University of Technology, Iran, Islamic Republic of | Poster sessions Poster sessions |
| Arjmand, Navid | Sharif University of Technology, Tehran, Iran | Musculoskeletal biomechanics V: Spine and Cranium |
| Armfield, Dylan | University College Dublin, Ireland | Cardiovascular implants and devices II: Biomechanics of valve implantation Presenter Cardiovascular implants and devices II: Biomechanics of valve implantation |
| Arminio, Mariachiara | Dept. of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy | Cardiovascular implants and devices II: Biomechanics of valve implantation Presenter |
| Arndt, Andreas | Biotronik SE & Co. KG | Computational methods for cardiovascular applications V |
| Arokoski, Jari | University of Helsinki and Helsinki University Hospital | Human movement I: Methodology Human movement II: Clinical applications |
| Aronis, Georgios | TU Wien, Austria | Ergonomics and occupational biomechanics + humanoid robotics and mechatronics Presenter |
| Arora, Hari | BESTlab, Dept Biomedical Engineering, Swansea University, United Kingdom; Swansea university, United Kingdom | Computational methods for cardiovascular applications II Poster sessions Respiratory biomechanics Presenter Soft tissue biomechanics IV: Eye, Brain, Pancreas, Breast, Fascia |
| Artacho, Francisco | University of Granada, Spain | Poster sessions |
| Artacho-Cordón, Francisco | University of Granada, Spain | Poster sessions |
| Aschenbrenner, Daniela | Julius Wolff Institute, Berlin Institute of Health at Charité, Charité – Universitätsmedizin Berlin, Germany | Sports biomechanics II: Foot and lower limb in sports biomechanics Presenter |
| Ashkenazi, Amit | Technion Israel Institute of Technology, Israel | Poster sessions Verification, validation and uncertainties quantification Presenter |
| Aslam, Ibtisam | Hopitaux Universitaires de Genève (HUG) et Université de Genève, Switzerland | Poster sessions |
| Asmar, Maria | Faculty of Medicine, Saint Joseph University of Beirut, Lebanon | Human movement II: Clinical applications |
| Aspelund, Thor | The Icelandic Heart Association, Iceland; University of Iceland, Iceland | Hard tissue biomechanics I Poster sessions |
| Assi, Ayman | Faculty of Medicine, Saint Joseph University of Beirut, Lebanon; Institut de Biomecanique Humaine Georges Charpak, Arts et Metiers, Paris, France; Laboratory of Biomechanics and Medical Imaging, Faculty of Medicine, University of Saint-Joseph, Beirut, Lebanon | Human movement II: Clinical applications Presenter Orthopaedic implants and devices IV: Spine Poster sessions Presenter |
| Assink, Nick | University Medical Centre Groningen, Netherlands, The | Orthopaedic implants and devices II: Fracture treatment and bone substitutes |
| Astolfi, Laura | Department of Neurosciences, University of Padua, Italy | Poster sessions Poster sessions |
| Astori, Davide | Politecnico di Milano, Italy | Computational methods for cardiovascular applications V Presenter Poster sessions |
| Astruc, Laure | ENSAIT, GEMTEX – Laboratoire de Génie et Matériaux Textiles, F-59000 Lille, France | Poster sessions |
| Atas, Akin | Medical Engineering Research Group, School of Engineering, University of Manchester, UK | Poster sessions |
| Ates, Filiz | Institute of Structural Mechanics and Dynamics in Aerospace Engineering, University of Stuttgart, Germany | Soft tissue biomechanics V: Muscle & tendon |
| Athanasiadis, Ignatios | Glasgow Computational Engineering Centre (GCEC), University of Glasgow, UK | Poster sessions |
| Audenaert, Emmanuel | Human Structure and Repair, Ghent University, Belgium; Department of Electromechanics, University of Antwerp, Belgium | New mathematics in biomechanics Poster sessions |
| Audenino, Alberto Luigi | Politecnico di Torino, Italy; PolitoBIOMed Lab, Politecnico di Torino, Italy; Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy | Computational methods for orthopaedic applications III Poster sessions Poster sessions Poster sessions Poster sessions Tissue engineering III: Musculoskeletal System II Cardiovascular implants and devices III: Stents and balloons Poster sessions Respiratory biomechanics |
| Audigié, Fabrice | EnvA, CIRALE, USC 957 BPLC, Maisons-Alfort, France | Animal and plant biomechanics |
| Augat, Peter | Institute for Biomechanics, BG Unfallklinik Murnau gGmbH, Germany; Institute for Biomechanics, Paracelsus Medical University Salzburg, Austria | Orthopaedic implants and devices II: Fracture treatment and bone substitutes |
| Auricchio, Ferdinando | 1. Civil Engineering and Architecture Department, Pavia University, Pavia, Italy; Civil Engineering and Architecture Department, Università degli Studi di Pavia, Pavia, Italy | Cardiovascular biomechanics II: Large vessel biomechanics II Computational methods for cardiovascular applications V Ocular biomechanics |
| Auvinet, Audrey | Lyos, INSERM, Univ Lyon 1, France; Univ Lyon, UCBL, INSERM, LYOS UMR 1033, France | Hard tissue biomechanics II Hard tissue biomechanics II |
| Avolese, Samuele | Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Italy; Dental School, Università di Torino, Italy | Dental biomechanics |
| Avril, Stéphane | MINES Saint-Étienne, Univ Lyon, Univ Jean Monnet, France; Ecole des Mines Saint-Étienne, France; École des Mines de Saint-Étienne, University of Lyon, Inserm, Sainbiose U1059, France; Mines Saint-Etienne, INSERM, U 1059 Sainbiose, F - 42023, Saint-Etienne, France | Cardiovascular biomechanics I: Large vessel biomechanics I Cardiovascular biomechanics I: Large vessel biomechanics I Cardiovascular biomechanics II: Large vessel biomechanics II Cardiovascular implants and devices III: Stents and balloons Computational methods in tissue mechanics I Poster sessions Soft tissue biomechanics II: Constitutive modelling |
| Avril, Stephane | Mines Saint etienne, France | Data driven healthcare and machine learning in biomechanics |
| Awad, Guy | Faculty of Medicine, Saint Joseph University of Beirut, Lebanon | Human movement II: Clinical applications |
| Awadalla, Maged | Medical Device Research Institution, College of Science and Engineering, Flinders University, Adelaide, SA, Australia | Orthopaedic implants and devices I: Total knee arthroplasty |
| Aydemir, M. Enes | ELZA Institute, Zürich, Switzerland | Ocular biomechanics |
| Ayoub, Elma | Faculty of Medicine, Saint Joseph University of Beirut, Lebanon | Poster sessions |
| Azar, Joe | Faculty of Medicine, Saint Joseph University of Beirut, Lebanon | Human movement II: Clinical applications |
| Azhar, Muhammad | The University of Manchester, United Kingdom | Computational methods for cardiovascular applications II Presenter |