Conference Agenda

ID: 202

IDENTIFYING THE NON-LINEAR BEHAVIOR OF 3D PRINTED POLYMERS UNDER MULTIAXIAL LOADING FOR SURGICAL SIMULATORS

M. Leclercq, J. Neggers, R. Legroux, E. Vennat

Université Paris-Saclay, ENS Paris-Saclay, CentraleSupélec, CNRS, LMPS - Laboratoire de Mécanique de Paris Saclay, 91190, Gif-sur-Yvette, France

ID: 341

3D-PRINTED HYPERELASTIC ORTHOTROPIC LATTICE STRUCTURES: NUMERICAL HOMOGENISATION AND EXPERIMENTAL VALIDATION

D. Raf, A. Ashkenazi, I. Magen, D. Solav

Technion Israel Institute of Technology, Israel

ID: 576

TITANIUM SCAFFOLDS APPLIED TO LARGE BONE DEFECTS. DESIGN STRATEGIES

A. Yánez, A. Cuadrado, O. Martel, M. P. Fiorucci

Department of Mechanical Engineering, University of Las Palmas de Gran Canaria, Spain

ID: 1094

ROUGHNESS AND MECHANICAL PROPERTIES OF CO-CR PARTS FABRICATED WITH RECYCLED POWDER BY LPBF

M. P. Fiorucci, A. Yánez, A. Cuadrado, O. Martel

University of Las Palmas of Gran Canaria, Spain

ID: 1141

PARAMETRIC DESIGN APPLIED IN THE MANUFACTURING OF CURVED SCAFFOLDS FOR OSTEOCHONDRAL TISSUE ENGINEERING

P. M. A. Marcelino^1,2, J. C. F. Silva², J. P. A. Meneses¹, N. Alves¹, P. C. R. Pascoal-Faria^1,3, F. C. A. Ferreira²

¹CDRSP-Centre for Rapid and Sustainable Product Development, Polytechnic of Leiria; ²Department of Bioengineering and iBB-Institute for Bioengineering and Biosciences, Instituto Superior Técnico, Universidade de Lisboa; ³Department of Mathematics, School of Technology and Management, Polytechnic of Leiria

ID: 1338

VISCOELASTIC CONSTITUTIVE CHARACTERIZATION OF 3D PRINTED PLA MATERIAL FOR BIOMEDICAL ENGINEERING

Z. Petřivý¹, L. Horný¹, Z. Sobotka¹, H. Chlup¹, K. Mendová¹, M. Kohan², T. Balint², R. Hudák², J. Živčák², M. Schnitzer²

¹Czech Technical University in Prague, Faculty of Mechanical Engineering, Czech Republic; ²Technical University of Košice, Faculty of Mechanical Engineering, Slovakia

ID: 502

A STANDARDIZED ODE MODEL FOR IMPLANT-INDUCED FIBROSIS

M. Marradi, M. van Griensven, A. Carlier

Dept. cBITE, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, the Netherlands

ID: 536

METABOLISM AND MECHANICS OF TUMOR SPHEROIDS THROUGH AN AGENT-BASED COMPUTATIONAL MODEL

P. García-Gómez, S. Hervás-Raluy, J. M. García-Aznar

Universidad de Zaragoza, Spain

ID: 595

THE ROLE OF BIOMARKERS OF HEMOPHILIC CARTILAGE DAMAGE IN PHYSIOLOGICAL REGULATION

V. S. M. Peddapeta¹, H. Fermor², G. de Boer¹, M. Mengoni¹

¹School of Mechanical Engineering, University of Leeds, Leeds, United Kingdom.; ²School of Biomedical Sciences, University of Leeds, Leeds, United Kingdom.

ID: 911

ANALYSIS OF CCL2 DISTRIBUTION INDUCING RUPTURE OF INTRACRANIAL ANEURYSMS

R. Kuwamoto¹, K. Shimano², S. Shiratori², H. Nagano²

¹Graduate School of Integrative Science and Engineering, Tokyo City University, Japan; ²Department of Mechanical Systems Engineering, Faculty of Science and Engineering, Tokyo City University, Japan

ID: 1131

SENSORY-FEEDBACK-BASED TRAINING OF A CENTRAL PATTERN GENERATOR NEURAL NETWORK

M. L. de Graaf^1,2, A. Daffertshofer³, K. J. Boström¹, H. Wagner¹

¹Department of Movement Science, University of Münster, Germany; ²Center for Nonlinear Science (CeNoS), University of Münster, Corrensstraße 2, 48149, Münster, Germany; ³Department of Human Movement Sciences, Vrije Universiteit Amsterdam, 1081BT Amsterdam, The Netherlands

ID: 1319

ASSESSMENT OF THE SYNOVITIS EFFECT ON THE ONSET OF OSTEOARTHRITIS THROUGH MULTI-SCALE MODELLING

A. Pascuet-Fontanet¹, L. Tío², J. Monfort², J. Noailly¹

¹BCN MedTech, Universitat Pompeu Fabra, Spain; ²Cell Research on Inflammation & Cartilage, Hospital del Mar Research Institute, Spain

ID: 288

COMPARISON OF CONVENTIONAL STATISTICAL SHAPE MODELING AND NOVEL IMAGE-BASED STATISTICAL SHAPE MODELING (ISSM)

R. Gu¹, S. Xie¹, W. Bai², A. Bull¹

¹Department of Bioengineering, Imperial College London, London W12 0BZ, United Kingdom; ²Department of Computing & Department of Brain Sciences, Imperial College London, London SW7 2AZ, United Kingdom

ID: 305

FEMUR COMPUTATIONAL BIOMECHANICS USING MOFEM: IMPLEMENTATION AND APPLICATIONS

V V S V. Jakka¹, C. J. Runcie², I. Athanasiadis², A. G. Shvarts², Ł. Kaczmarczyk², C. Ruiz Wills¹, L. Humbert³, J. Noailly¹

¹BCN MedTech, Universitat Pompeu Fabra (UPF), Barcelona, Spain; ²Glasgow Computational Engineering Centre (GCEC), University of Glasgow, UK; ³3D-Shaper Medical SL, Barcelona, Spain

ID: 308

PRINCIPAL STRAINS AS PRIMARY MECHANICAL STIMULI IN A FRACTURE HEALING ALGORITHM

G. Morgan¹, L. Low¹, A. Ramasamy^1,2, S. Masouros¹

¹Department of Bioengineering, Imperial College London, United Kingdom; ²Academic Department of Trauma and Orthopaedics, Royal Centre for Defence Medicine, ICT Centre, Birmingham, UK

ID: 458

ADVANCING DIAGNOSTIC PRECISION IN IDIOPATHIC SCOLIOSIS: A COMPREHENSIVE APPROACH

D. F. Landinez Leon, C. F. Rodríguez Herrera, C. J. Cifuentes de la Portilla

Universidad de los Andes, Colombia

ID: 462

FINITE ELEMENT ANALYSIS OF PERIPROSTHETIC TIBIAL FRACTURE AFTER CEMENTLESS OXFORD UNICOMPARTMENTAL KNEE ARTHROPLASTY

X. Min, L. Marks, D. Murray, S. Mellon

Oxford Orthopaedic Engineering Centre, NDORMS, University of Oxford, United Kingdom

ID: 484

INFINITY® FIXED-BEARING TOTAL ANKLE REPLACEMENT: ON THE CONTACT PRESSURE AND PREDICTION OF WEAR RATE

N. B. Abd Razak¹, M. Corbett², N. Webb³, R. Vemuri³, B. M Walters³, A. E Kedgley¹

¹Imperial College London, United Kingdom; ²Stryker Innovation Centre, Ireland; ³Stryker Corporation, USA

ID: 504

INVESTIGATING THE IMPACT OF DIFFERENT INSOLE MATERIALS ON FOOT BIOMECHANICS USING FINITE ELEMENT ANALYSIS

P. Y. Tsai

National Yang Ming Chiao Tung University, Taiwan

ID: 561

A MULTI-BODY KNEE MODEL TO INVESTIGATE ANTERIOR CRUCIATE LIGAMENT BIOMECHANICS

C. Anacleto¹, J. Oliveira³, J. Noronha³, J. Simões², A. Ramos¹

¹TEMA, Department of Mechanical Engineering, university of Aveiro, Portugal; ²ESAD, Matosinhos, Portugal; ³Faculty of Medicine, University of Coimbra, Portugal

ID: 733

FINITE ELEMENT MODELLING OF LOCKING PLATE FIXATION DURING HUMERAL ABDUCTION CYCLE

D. M. Carroll, L. Kiener, D. Baumgartner, M. M. Nusser

Zurich University of Applied Sciences, Switzerland

ID: 907

EXPANSION BIOMECHANICAL SIMULATION: LEVERAGING FREEFORM SOFTWARE FOR FRACTURE PATTERN IMPLEMENTATION

K. Wickert, M. Roland, A. Andres, S. Diebels

Saarland University, Applied Mechanics, Germany

ID: 1026

TESTING THE INFLUENCE OF DIFFERENT MECHANICAL STIMULI ON BONE HEALING SIMULATION

R. Reinardt¹, M. Roland¹, A. Bäumchen¹, G. S. Nayak¹, S. Diebels¹, B. Ganse², T. Pohlemann³, M. Orth³

¹Applied Mechanics, Saarland University, Germany; ²Department of Trauma, Hand and Reconstructive Surgery, Saarland University, Germany; ³Werner Siemens Endowed Chair of Innovative Implant Development (Fracture Healing), Saarland University, Germany

ID: 1029

IDENTIFYING EFFECTIVE INTERVENTIONS TO MAINTAIN BONE HEALTH IN LOWER LIMB AMPUTEES

L. Wang^1,2, L. McMenemy^2,3, A. H. McGregor^2,4, A. T. M. Philips^1,2

¹Structural Biomechanics Group, Department of Civil and Environmental Engineering, Imperial College London, United Kingdom; ²Centre for Injury Studies, Department of Bioengineering, Imperial College London, United Kingdom; ³Academic Department of Military Surgery and Trauma, RCDM, Birmingham, United Kingdom; ⁴Department of Surgery and Cancer, Imperial College London, United Kingdom

ID: 1051

PUSH-PULL HUMERAL PLATE: DEVELOPMENT AND VALIDATION OF A NUMERICAL MODEL BASED ON EXPERIMENTAL ACTIVITIES

E. Bori^1,2, G. Putzeys³, O. Taylan⁴, L. Scheys⁴, B. Innocenti¹

¹BEAMS Department, EPB, Université Libre de Bruxelles, Brussels, Belgium; ²ECAM Engineering School, Health Engineering Dept, Brussels, Belgium; ³AZ Groeninge, Kortrijk, Belgium; ⁴KU Leuven, Leuven, Belgium

ID: 1113

MODELING THE KNEE JOINT WITH A HYBRID APPROACH USING CONTACT SURROGATE BASED ON POLYNOMIAL CHAOS EXPANSION

A. Ciszkiewicz¹, Ł. Mazurkiewicz², J. Małachowski²

¹Faculty of Mechanical Engineering, Cracow University of Technology, Poland; ²Faculty of Mechanical Engineering, Military University of Technology, Poland

ID: 1128

INFLUENCE OF STEM LENGTH OF TOTAL SHOULDER REPLACEMENT IMPLANTS ON HUMERAL STRAINS

V. Chauhan, A. Meena, R. Bhattacharya, K. Mukherjee

Indian Institute of Technology Delhi, India

ID: 1206

SCREW CONFIGURATION OPTIMIZATION IN 4-PART HUMERAL FRACTURE SURGERY: AN ALGORITHMIC APPROACH

M. M. Nusser, D. M. Carrol, L. Kiener, D. Baumgartner

ZHAW, School of Engineering, Switzerland

ID: 1265

IN-SILICO TIME-DEPENDENT MODELLING TO PREDICT THE PERFORMANCE OF BIODEGRADABLE DEVICES OVER TIME

O. De Becker¹, P. Ansoms¹, L. Geris^1,2, J. Vander Sloten¹

¹KU Leuven, Belgium; ²Université de Liège, Belgium

ID: 1300

METHODOLOGICAL APPROACH TO THE ANALYSIS OF TRABECULAR BONE ANISOTROPY IN THE HUMAN PELVIS

C. M. Micheler^1,2, K. Yavasoglu¹, J. Kollofrath³, F. Charitou¹, R. von Eisenhart-Rothe¹, C. Große³, M. F. Zäh², R. H. H. Burgkart¹, J. J. Lang^1,3

¹Department of Orthopaedics and Sports Orthopaedics, Klinikum rechts der Isar, Technical University of Munich, Germany; ²Institute for Machine Tools and Industrial Management, Technical University of Munich, Germany; ³Chair of Non-destructive Testing, Technical University of Munich, Germany

ID: 224

TOWARDS BRIDGING THE BIOMECHANICS AND PATHOPHYSIOLOGY IN A PRECLINICAL MOUSE MODEL OF TRAUMATIC BRAIN INJURY

A. A. Rostam-Alilou¹, S. Mondal², D. Loane³, C. Lally³, N. Dunne¹, D. MacManus⁴

¹Dublin City University, Ireland; ²Queen Mary University London; ³Trinity College Dublin; ⁴University College Dublin

ID: 232

BONE INGROWTH IN POROUS INTERBODY CAGE FOR LUMBAR SPINAL FUSION

R. G. Talukdar, S. Dhara, S. Gupta

Indian Institute of Technology Kharagpur, India

ID: 318

COMPUTATIONAL INSIGHTS OF COMPRESSION IN VEGF DIFFUSION AND CAPILLARY NETWORK FORMATION

A. Guerra¹, J. Belinha², C. Salgado³, F. J. Monteiro³, R. Natal Jorge⁴

¹INEGI, Portugal; ²ISEP, Portugal; ³i3S, Portugal; ⁴FEUP, Portugal

ID: 385

MULTIVARIATE REGRESSION MODELS TO LINK MORPHOLOGICAL AND MECHANICAL PARAMETERS OF SYNTHETIC MESHES

V. Civilini^1,2, A. Aldieri^1,2, V. Giacalone^1,2, A. Audenino^1,2, M. Terzini^1,2

¹Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy; ²PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy

ID: 541

3D PARAMETRIC FINITE ELEMENT MODEL FOR THE MECHANICAL SIMULATION OF VERTEBRAE WITH METASTATIC LESIONS

J. Muñoz-Allué¹, E. Dall'Ara², M. Palanca³, M. Á. Pérez¹, J. M. García-Aznar¹

¹Aragon Institute of Engineering Research (I3A), University of Zaragoza, Spain; ²Division of clinical medicine and Insigneo institute, University of Sheffield, United Kingdom; ³Dept of Industrial Engineering, University of Bologna, Italy

ID: 614

IMPACT OF SPINAL LIGAMENT STIFFNESS ON INTERVERTEBRAL DISC AND FACET JOINT LOADING: AN FE SENSITIVITY ANALYSIS

E. S. Kelly¹, A. A Javadi¹, T. Holsgrove¹, M. Ward¹, D. Williams², D. Shillabeer², J. Williams², C. Holt², J. Meakin¹

¹University of Exeter, United Kingdom; ²Cardiff University, United Kingdom

ID: 630

CELL ADHESION REGULATION BY NANOPARTICLE LIGAND PATTERNS: A MONTE CARLO STUDY

H. Jafarinia, X. Zhang, S. van Rijt, A. Carlier

MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands

ID: 863

A MULTIPLE-TARGETS INVERSE FINITE ELEMENT APPROACH FOR CHARACTERISING MULTI-LAYERED SOFT TISSUES

M. Akbarzadeh Khorshidi¹, S. Bose¹, B. Watschke², E. Mareena³, C. Lally¹

¹Trinity College Dublin, Ireland; ²Boston Scientific Corp, Inc, Minnetonka, MN, USA; ³Boston Scientific Corp, Inc, Clonmel Co, Tipperary, Ireland

ID: 866

DETERMINING EXPERIMENTAL ERRORS TO REFINE FEM DESIGN OF 2D SCAFFOLD FOR BIOMEDICAL APPLICATIONS.

G. Prosperi¹, J. Paredes^1,2, J. Aldazabal^1,2

¹University of Navarra, TECNUN School of Engineering, San Sebastian, 20018, Spain; ²University of Navarra, Biomedical Engineering Center, Campus Universitario, Pamplona, 31080, Spain

ID: 896

NEURAL NETWORK BASED CONSTITUTIVE MODEL FOR SKELETAL MUSCLE ACTIVE BEHAVIOUR

J. Grasa¹, Á. Heras-Sádaba¹, A. Pérez-Ruiz², B. Calvo¹

¹Universidad de Zaragoza, Spain; ²Universidad de Navarra, Spain

ID: 910

COMPARATIVE ANALYSIS ON PARAMETER IDENTIFICATION OF BRAIN TISSUE USING INVERSE FEM AND INVERSE MESHLESS METHODS

S. PAL, S. ROY

Indian Institute of Technology, Delhi, India

ID: 1024

DO STIFFNESS GRADIENTS PLAY A ROLE IN THE PROTECTION OF THE TENDON-TO-BONE INTERFACE? A COMPUTATIONAL STUDY

A. Malerba¹, A. Tits¹, T. Volders¹, P. Vena², D. Ruffoni¹

¹University of Liege, Belgium; ²Politecnico di Milano, Italy

ID: 1054

COMPUTATIONAL MODELLING OF LOW-PRESSURE ELASTIC LAMELLAE UNFOLDING OF THE MOUSE CAROTID ARTERY

J. Duquesne, Y. M. Abdel-Raouf, P. Segers

IBiTech-BioMMedA, Ghent University, Belgium

ID: 1101

NUMERICAL ASSESSMENT OF THE BONE-IMPLANT INTERFACE USING QUANTITATIVE ULTRASOUND

B. Moisan¹, G. Jehanno¹, N. Bochud¹, G. Rosi¹, A. Dubory², S. Le Cann¹, G. Haïat¹

¹MSME UMR 8208, CNRS, UPEC, UGE, France; ²Hôpital Henri Mondor, Creteil, France

ID: 134

Machine Learning Driven Patient Stratification and Aortic Disease Management

K. Bates¹, L. Kennedy¹, J. Therrien², K. Lachapelle³, R. L. Leask¹

¹McGill University, Canada; ²McGill Adult Unit for Congenital Heart Disease Excellence, Canada; ³Division of Cardiac Surgery, McGill University Health Centre, Canada

ID: 212

NON-INVASIVE DETECTION OF KNEE OSTEOARTHRITIS: A MARKERLESS GAIT ANALYSIS METHOD

C. D. Pace¹, A. M. De Nunzio^2,3, C. De Stefano¹, F. Fontanella¹, M. Molinara¹

¹University of Cassino and Southern Lazio, Italy; ²LUNEX International University, Differdange, Luxembourg;; ³Luxembourg Health & Sport Sciences Research Institute ASBL, Luxembourg

ID: 295

AN AI-BASED CLINICAL DATA MANAGEMENT PIPELINE FOR IN SILICO CLINICAL TRIALS

R. GANESAN, F. N. V. D. VOSSE, W. HUBERTS

EINDHOVEN UNIVERSITY OF TECHNOLOGY, Netherlands, The

ID: 299

GENERATION OF PSEUDO - COMPUTED TOMOGRAPHY OF THE KNEE FROM MAGNETIC RESONANCE IMAGE USING DUAL U - NET WITH IMAGE BLENDING

C. .-.Y. Lu, C. .-.C. Lin

Department of Electrical Engineering, Fu Jen Catholic University, New Taipei City, Taiwan

ID: 348

A DATA DRIVEN METHOD FOR SHORT-TERM BIOMECHANICS TIME-SERIES SIGNAL FORECASTING

Q. Bian, Z. Ding

University of Birmingham, United Kingdom

ID: 355

PREDICTING CARDIOVASCULAR RISK: A MACHINE LEARNING APPROACH INTEGRATING VISCOELASTIC FEATURES

D.-M. Dinh, K. Rhee

Myongji University, Korea, Republic of (South Korea)

ID: 584

TRANSFORMING CLINICAL CT IMAGES OF THE PROXIMAL FEMUR INTO µCT IMAGES: A DEEP LEARNING APPROACH

O. B. Satir¹, S. Gremaud¹, G. Gerber¹, P. Eghbali², F. Becce³, P. Goetti³, A. Terrier^2,3, P. Büchler¹

¹ARTORG Center for Biomedical Engineering Research, Switzerland; ²Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland; ³Lausanne University Hospital (CHUV), Switzerland

ID: 602

LAN-DET: A NOVEL PHYSICS-INFORMED DEEP LEARNING APPROACH FOR THE EXTRACTION OF SPINOPELVIC ANATOMICAL PARAMETERS

A. MohammadiNasrabadi, J. McPhee

University of Waterloo, Canada

ID: 696

STATISTICAL SHAPE MODEL-BASED PREDICTION OF FEMORAL SHAPE FROM X-RAYS USING CONVOLUTIONAL NEURAL NETWORKS

H.-J. Chen, C.-C. Lin

Department of Electrical Engineering, Fu Jen Catholic University, New Taipei City, Taiwan

ID: 955

PREDICTING GAIT KINETICS USING IMU DATA AND ARTIFICIAL NEURAL NETWORKS

C. Gempfer¹, G. F. Santos¹, A. Hobein¹, T. Kuhlgatz^1,2, C. Hurschler¹, E. Jakubowitz¹

¹Laboratory for Biomechanics and Biomaterials, Department of Orthopaedic Surgery, Hannover Medical School (MHH), Germany; ²Leibniz University Hannover, Institute of Mechatronic Systems, Germany

ID: 959

VALIDATION OF A 2D MARKERLESS MOTION ANALYSIS SOFTWARE BASED ON OPENPOSE USING IMU SENSORS

S. Galasso^1,2,3, C. Carissimo², M. Molinara², G. Cerro⁴, R. Baptista^1,3, S. Pizzocaro^1,3,5, R. S. Calabrò⁶, A. M. De Nunzio^1,3

¹Dep. of Research and Development, LUNEX International University, Differdange, Luxembourg; ²Dep. of Electrical and Information Engineering, University of Cassino and Southern Lazio, Cassino, Italy; ³Luxembourg Health & Sport Sciences Research Institute ASBL, Differdange, Luxembourg; ⁴Dep. of Medicine and Health Sciences “Vincenzo Tiberio”, University of Molise, Campobasso, Italy; ⁵Dep. of Electrical, Computer and Biomedical Engineering, University of Pavia, Pavia, Italy; ⁶Istituto di Ricerca e Cura a Carattere Scientifico Centro Neurolesi “Bonino Pulejo”, Messina, Italy

ID: 977

GENERATING VIRTUAL PATIENT DATA FOR ENHANCED IN SILICO TRIALS OF MEDICAL DEVICES DURING ECMO TREATMENT

M. Landoll^1,2,3, Y. Huang¹, S. Strassmann³, C. Karagiannidis³, M. Neidlin¹

¹Department of Cardiovascular Engineering, Institute of Applied Medical Engineering, Helmholtz Institute, RWTH Aachen University, Aachen, Germany; ²Institute for Computational Biomedicine II, University Hospital Aachen, RWTH Aachen University, Aachen, Germany; ³ARDS and ECMO Centre Cologne-Merheim, Dept. of Pneumology and Critical Care Medicine, Kliniken der Stadt Köln gGmbH, Witten/Herdecke University, Cologne, Germany

ID: 999

DIGITAL HUMAN TWINS THROUGH HYBRID ARTIFICIAL INTELLIGENCE

L. Tesán¹, D. González¹, F. Chinesta², E. Cueto¹

¹Universidad de Zaragoza, Spain; ²Arts et Metiers Institute of Technology, France

ID: 1102

AN IOT-BASED BIOSIGNAL DATA ACQUISITION SYSTEM FOR ADVANCING BIOMECHANICAL STUDIES

A. Raj K, A. Tewari

Indian Institute of Technology, Bombay, India

ID: 1129

IMPROVING DEEP LEARNING FEMUR METASTASIS SEGMENTATION BY USING REALISTIC SYNTHETIC CT VOLUMES FOR FRACTURE ASSESSMENT

E. Saillard^1,2, S. Cadot³, C. Confavreux^1,3, J.-B. Pialat^2,3, T. Grenier², H. Follet¹

¹Univ Lyon, Univ Claude Bernard Lyon 1, INSERM, LYOS UMR 1033, 69008 Lyon, France; ²Univ Lyon, INSA-Lyon, Univ Claude Bernard Lyon 1, CREATIS, UMR5220, 69100 Villeurbanne, France; ³Hospices Civils de Lyon

ID: 1140

BONE REMODELLING AFTER SCREW INSERTION USING NEURAL NETWORKS

A. Pais¹, J. Lino Alves¹, J. Belinha²

¹INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal; ²ISEP - Department of Mechanical Engineering, School of Engineering, Polytechnic of Porto

ID: 1144

ACCELLERATING BIO-INSPIRED OPTIMIZATION OF IMPLANTS WITH NEURAL NETWORKS

A. Pais¹, J. Lino Alves¹, J. Belinha²

¹INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering; ²ISEP - Department of Mechanical Engineering, School of Engineering, Polytechnic of Porto

ID: 1305

DETECTING ACUTE DEPRESSIVE STATES VIA AUTOMATIC CLASSIFICATION OF MOTION DATA

J. Große Sundrup¹, K. Schnell², K. Mombaur^1,3

¹University of Waterloo, Canada; ²University Medical Center Göttingen, Germany; ³Karlsruhe Institute of Technology, Germany

ID: 1312

CHARACTERISATION OF SKIN IN LYMPHOEDEMA PATIENTS

C. Smith, R. Southam, H. Arora, R. van Loon

BESTlab, Dept Biomedical Engineering, Swansea University, United Kingdom

ID: 375

EXPERIMENTAL MUSSEL-INSPIRED DENTAL ADHESIVES AGAINST WHITE SPOT LESIONS AROUND ORTHODONTIC BRACKETS

L. Singer^1,2, C. Bourauel¹

¹Oral Technology, University Hospital Bonn; ²Department of Orthodontics, University Hospital Bonn

ID: 821

EFFECT OF MANDIBLE SIMPLIFICATION WITH STANDARD MANDIBULAR COMPONENT OF TMJ IMPLANTS

V. Verma¹, G. Chandra¹, K. Kaur², A. Roychoudhury², S. Mukherjee¹, A. Chawla¹, K. Mukherjee¹

¹Indian Institute of Technology Delhi, India; ²All India Institute of Medical Sciences Delhi, India

ID: 1033

ZIRCONIA CROWNS DIRECTLY SCREWED TO THE MPLANT: EFFECT OF ANTI-ROTATIONAL GROOVE DESIGN ON FRACTURE STRENGTH

A. Fouda^1,2, J. Scherer³, C. Bourauel¹

¹ORAL TECHNOLOGY DEPARTMENT, UNIVERSITY HOSPITAL BONN, GERMANY; ²FIXED PROSTHODONTICS DEPARTMENT, SUEZ CANAL UNIVERSITY, EGYPT; ³ADVANTIQX, GERMANY

ID: 1281

MUSCULOSKELETAL MODELLING OF JAW USING OPENSIM

R. Bora, S. Mukherjee, K. Mukherjee

Indian Institue of Technology Delhi, India

ID: 1294

MECHANICAL AND CHEMICAL CHARACTERIZATION OF DENTAL TISSUES AFFECTED BY MOLAR AND INCISOR HYPOMINERALIZATION

S. Janot¹, V. Larrauri¹, D. Neuville², P. Djémia³, E. Vennat⁴, N. Roubier⁴, E. Dursun¹, A. Benoit¹

¹Université Paris Cité, URB2i, France; ²Université Paris Cité, IPGP, France; ³Université Sorbonne Paris Nord, LSPM, France; ⁴CentraleSupélec, LMPS, France

ID: 262

GRADED POROUS SCAFFOLD MEDIATES INTERNAL FLUIDIC ENVIRONMENT FOR 3D IN VITRO MECHANOBIOLOGY

C. A. De Rosa¹, C. J. Wright¹, Y. Xiong², F. Del Giudice¹, F. Zhao¹

¹Swansea University, United Kingdom; ²Southern University of Science and Technology, China

ID: 473

MICRONICHE GEOMETRY REGULATES CHONDROCYTE CALCIUM SIGNALING AND YAP ACTIVITY

Q.-Y. Zhang

Taiyuan University of Technology, China, People's Republic of

ID: 481

COMPARATIVE BONE INGROWTH ANALYSIS BETWEEN CONVENTIONAL BEADED COAT AND POROUS LATTICE STRUCTURE: A FINITE ELEMENT STUDY

M. ., R. Ghosh

Indian Institute of Technology, Mandi Kamand, Himachal Pradesh (175005), India, India

ID: 489

COMPARISON OF INTERVERTEBRAL DISC CELL VIABILITY BETWEEN SEDENTARY AND ACTIVE LIFESTYLES

I. Ebisch¹, D. Lazaro-Pacheco¹, D. Farris², T. P. Holsgrove¹

¹Department of Engineering, University of Exeter, United Kingdom; ²Department of Public Health and Sport Sciences, University of Exeter, United Kingdom

ID: 628

REDUCED OSTEOCLASTOGENESIS AND PERILACUNAR REMODELLING IN RATS TREATED WITH LOW-DOSE SCLEROSTIN ANTIBODY SOON AFTER OVX

S. M. Naqvi¹, L. M. O’Sullivan¹, H. Allison¹, J. A. Panadero-Perez¹, G. Holdsworth², J. Schiavi-Tritz³, L. M. McNamara¹

¹University of Galway, Ireland; ²UCB Pharma, UK; ³CNRS-Lorraine University, France

ID: 637

FINITE ELEMENT SIMULATION OF THE SUBSTRATE STIFFNESS INFLUENCE IN THE CELL ADHESIONS OF A MONOLAYER

O. Paseta, J. M. Garcia-Aznar, M. J. Gomez-Benito

Universidad de Zaragoza, Spain

ID: 845

A LINEAR FIT FOR DETERMINING YOUNG’S MODULUS IN VERY DEEP SPHERICAL INDENTATIONS

A. Stylianou¹, S. V. Kontomaris^2,3

¹European University Cyprus / EUC Research Centre, Cyprus; ²Metropolitan College, Greece; ³BioNanoTec LTD

ID: 991

MACROPHAGE MECHANOBIOLOGY: HOW STIFFNESS AFFECTS MACROPHAGE FUNCTION AND MECHANICS

H. El Showk^1,2, R. Erkan^1,2, L. Angeloni^1,2, C. V. Bouten^1,2, A. I. Smits^1,2

¹Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands; ²Institute for Complex Molecular Systems (ICMS), Eindhoven University of Technology, Eindhoven, The Netherlands

ID: 1050

STUDYING BONE REMODELING-REGULATING MECHANICAL STIMULI THROUGH MULTISCALE, MICROMECHANICS-INSPIRED MODELING

S. Scheiner¹, P. Pivonka², C. Hellmich¹

¹TU Wien, Austria; ²Queensland University of Technology, Australia

ID: 1059

EFFECTS OF COMPRESSION AND TNF ON HUMAN CARTILAGINOUS ENDPLATE CELLS IN 3D AGAROSE CULTURE

K. B Crump^1,2, M. Segarra-Queralt⁵, P. Bermudez-Lekerika^1,2, L. Geris^3,4, J. Noailly⁵, B. Gantenbein^1,6

¹TOM Lab, Department for BioMedical Research, University of Bern, Switzerland; ²Graduate School for Cellular and Biomedical Sciences, University of Bern, Switzerland; ³GIGA In Silico Medicine, University of Liège, Belgium; ⁴Skeletal Biology and Engineering Research Center, KU Leuven, Belgium; ⁵BCN MedTech, Universitat Pompeu Fabra, Spain; ⁶Department of Orthopedic Surgery & Traumatology, Inselspital, University of Bern, Switzerland

ID: 1203

REFINING AN OSTEOARTHRITIS IN VITRO MODEL BY EMPLOYING OSTEOCHONDRAL PLUGS’ ELECTROMECHANICAL PROPERTIES

C. Mathieu, Y. Pooshidani, R. Castillo, J. Doan, S. Sim, E. Quenneville, M. Garon

Biomomentum Inc, Canada

ID: 1318

A NOVEL SETUP TO APPLY SUBSTRATE DEFORMATION IN TWO-DIMENSIONAL CELL CULTURE SYSTEMS

M. Carvalho^1,2,3, S. Monteiro-Reis^2,3, M. Parente¹, J. Ferreira¹

¹Department of Mechanical Engineering, Faculty of Engineering, University of Porto (FEUP), Portugal; ²Institute of Science and Innovation in Mechanical and Industrial Engineering (INEGI), Portugal; ³Cancer Biology and Epigenetics Group, Research Center of IPO Porto (CI-IPOP)/RISE@CI-IPOP (Health Research Network), Portuguese Oncology Institute of Porto (IPO Porto), Porto Comprehensive Cancer Centre (Porto.CCC), Portugal

ID: 457

A REVIEW OF METHODS TO CHARACTERISE CORTICAL THICKENING IN TOTAL HIP REPLACEMENT PATIENT

C. Keighley¹, G. Isaac¹, S. Williams¹, D. Beverland², C. Wither³, R. Wilcox¹

¹University of Leeds, United Kingdom; ²Musgrave Park Hospital, United Kingdom; ³DePuy Synthes, United Kingdom

ID: 551

CORRELATIVE IN SITU SYNCHROTRON SAXS, WAXS, AND CT FOR THE INVESTIGATION OF STRAIN TRANSFER ACROSS THE INTERVERTEBRAL DISC HARD-SOFT TISSUE BOUNDARY

A. L. Parmenter^1,2, E. Newham³, C. M Disney⁴, A. Sharma^1,6, S. Marussi^1,2, F. Bosi¹, B. K Bay⁵, N. J Terrill⁴, A. A Pitsillides⁶, H. S Gupta³, P. D Lee^1,2

¹Department of Mechanical Engineering, University College London, United Kingdom; ²Research Complex at Harwell, United Kingdom; ³School of Engineering and Materials Science, Queen Mary University of London, United Kingdom; ⁴Diamond Light Source, United Kingdom; ⁵School of Mechanical, Industrial and Manufacturing Engineering, Oregon State University, USA; ⁶Royal Veterinary College, United Kingdom

ID: 565

TRABECULAR BONE MORPHOMETRY USING PHOTON COUNTING COMPUTED TOMOGRAPHY

J. Quintiens^1,2, S. Manske², S. K Boyd², W. Coudyzer³, G. H. van Lenthe¹

¹Department of Mechanical Engineering, Biomechanics Section, KU Leuven; ²Department of Radiology, McCaig Institute for Bone and Joint Health, Cumming School of Medicine, University of Calgary; ³Department of Radiology, University Hospital Leuven

ID: 587

CHARACTERIZATION OF THE LOWER LIMB NERVES VIA ULTRASOUND ELASTOGRAPHY: A PRELIMINARY STUDY

G. Rossetto¹, M. Mosso¹, C. Cornali¹, N. F. Lopomo², E. Scalona¹

¹Università degli Studi di Brescia, Italy; ²Politecnico di Milano, Italy

ID: 717

ARTHROKINEMATICS OF TIBIO-FEMORAL JOINT OF KNEE DURING WALKING USING A DYNAMIC X-RAY IMAGING SYSTEM

J. Oh¹, S. Yoon¹, J. Wang², S. Koo¹

¹Korea Advanced Institute of Science and Technology, Korea, Republic of (South Korea); ²Samsung Medical Center, Korea, Republic of (South Korea)

ID: 1161

ACCURACY OF A MULTIMODAL 2D-3D REGISTRATION ALGORITHM IN COMPARISON WITH GOLD-STANDARD LANDMARKING REGISTRATION

F. Correia Marques, R. Müller

Institute for Biomechanics, ETH Zürich, Zürich, Switzerland

ID: 1188

MICROARCHITECTURAL CARACTERISATION OF TRABECULAR BONE IN METASTATIC PATIENTS USING MICRO-COMPUTED TOMOGRAPHY

E. Massardier^1,2, J. Guinard^2,3, J.-P. Roux³, F. Rongieras^1,2, F. Bermond², C. Confavreux^1,3, D. Mitton², H. Follet³, A. Levillain²

¹Hospices Civils de Lyon, France; ²LBMC, Univ Eiffel, Univ Lyon 1, France; ³Lyos, INSERM, Univ Lyon 1, France

ID: 470

MODELING AEROSOL DELIVERY IN THE HUMAN UPPER AIRWAYS CONSIDERING DIFFERENT GEOMETRIES

S. Ceolin^1,2, R. Fernández-Parra³, C. Sánchez-Matás⁴, J. L. López-Villalobos⁵, M. Malvè¹

¹Public University of Navarra, Spain; ²University of Padua, Italy; ³Catholic University of Valencia 'San Vicente Martir', Spain; ⁴University Hospital 'Virgen de la Arrixaca', Spain; ⁵University Hospital 'Virgen del Rocio', Spain

ID: 607

IN SILICO 0D MODEL FOR THE BEST PEEP SELECTION DURING MECHANICAL VENTILATION: RECRUITMENT VS RISK OF VILI

A. Formaggio^1,2, M. De Luca^1,2, G. Putame^1,2, S. Borrelli^1,2, A. L. Audenino^1,2, M. Terzini^1,2

¹Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino (Italy); ²PolitoBIOMed Lab, Politecnico di Torino, Torino (Italy)

ID: 871

BIOMECHANICS OF THE UNSTABLE THORAX: RESPIRATORY WORK AND INTRATHORACIC VOLUME CHANGES IN SEGMENTAL RIB FRACTURES

J. N. Zierke¹, G. N. Duda¹, M. Niemann^1,2, M. Heyland¹

¹Julius Wolff Institute, Berlin Institute of Health at Charité – Universitätsmedizin Berlin, Germany; ²Charité – Universitätsmedizin Berlin, Centre for Musculoskeletal Surgery, Berlin, Germany

ID: 596

BIOREACTOR DESIGN AND STUDY "TORSIONAL WAVES IN MELANOMA STEM CELL TREATMENT"

M. Hurtado, D. Martínez-Moreno, C. Griñán-Lisón, G. Jiménez, E. Lopez, A. Callejas, O. Roda, F. Artacho, J. M. Melchor, J. A. Marchal, G. Rus

University of Granada, Spain

ID: 687

MECHANICAL EVALUATION OF HIP IMPLANTS IN HEALTHY AND OSTEOPOROTIC BONE USING FINITE ELEMENT ANALYSIS

F. Alabdah^1,2, A. Alshammari^1,2, A. Hidalgo-Bastida³, G. Cooper¹

¹The University of Manchester, United Kingdom; ²The University of Hail, Saudi Arabia; ³Manchester Metropolitan University, United Kingdom

ID: 700

PORE SIZE QUANTIFICATION FOR TPMS-BASED SCAFFOLDS

J. E. Santos¹, S. J Hollister², P. R. Fernandes¹, A. P. G. Castro^1,3

¹IDMEC, University of Lisbon, Portugal; ²Center for 3D Medical Fabrication, Dep. of Biomedical Eng., Georgia Institute of Technology, USA; ³Escola Superior de Tecnologia de Setúbal, Instituto Politécnico de Setúbal, Portugal

ID: 721

VISCOELASTICITY CAN BE TUNED TO INFLUENCE STRAIN TRANSFER IN CARTILAGE TISSUE MODELS

M. Boos¹, S. Lamandé^2,3, K. Stok¹

¹Department of Biomedical Engineering, The University of Melbourne, Australia; ²Musculoskeletal Research, Murdoch Children’s Research Institute, Australia; ³Department of Paediatrics, The University of Melbourne, Australia

ID: 750

DETERMINATION OF MATERIAL PARAMETERS OF SCAFFOLD-FREE TENDON REGENERATES WITH HYPERELASTIC MATERIAL MODELS

T. Reuter¹, I. Ponomarev²

¹ICM - Institut Chemnitzer Maschinen- und Anlagenbau e.V., Chemnitz, Germany; ²Research Centre of Medical Technology and Biotechnology, Bad Langensalza, Germany

ID: 1016

SEX DIFFERENCES ON THE BENCH

R. Grant

Institute for Bioengineering, School of Engineering, University of Edinburgh, United Kingdom

ID: 1053

TAILORING HYDROGEL MECHANICS AND ARCHITECTURE FOR EFFECTIVE VOCAL FOLD REGENERATION

S. Nejati, L. Mongeau

McGill University, Montreal, Canada

ID: 1066

CLINICAL INSIGHTS INTO MANDIBULAR REGENERATION: A STUDY ON MULTIMATERIAL SCAFFOLD APPLICATIONS

P. D. Rebolo¹, V. Orassi³, B. Areias¹, N. Ramião¹, S. Checa³, J. F. Correia¹, R. Natal^1,2, M. Parente^1,2

¹INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering; ²Faculty of Engineering - University of Porto; ³Julius Wolff Institute, Berlin Institute of Health at Charité—Universitätsmedizin Berlin

ID: 1186

BIOMECHANICAL ASSESSMENT OF CRYOPRINTED HYBRID SCAFFOLDS FOR CARTILAGE TISSUE ENGINEERING

K. Yigit, A. Callanan

The University of Edinburgh, United Kingdom

ID: 1252

MECHANICAL EVALUATION OF ANNULUS FIBROSUS REPAIR STRATEGY USING FINITE ELEMENT MODELLING

L. Song, A. Alshammari, C. Lin, A. Atas, G. Cooper

Medical Engineering Research Group, School of Engineering, University of Manchester, UK

ID: 1288

A TRI-ZONAL MELT ELECTRO-WRITTEN CONSTRUCT FOR CARTILAGE TISSUE ENGINEERING: AN IN-SILICO APPROACH

P. Varatharajan¹, D. Kelly², K. Manda¹

¹School of Mechanical and Aerospace Engineering, Queen's University Belfast, United Kingdom; ²Trinity Centre for Biomedical Engineering, Trinity College Dublin, Ireland

ID: 228

OPTIMIZING 3D REGISTRATION WITH THE PCDICOM APP TO ANALYSE THE RELATION BETWEEN SPINAL ALIGNMENT AND BACK SHAPE

M. Kaiser, M. Bertsch, S. Cukovic, W. R. Taylor

ETH Zürich, Switzerland

ID: 391

PORESCANNER APP: AN EASY METHOD FOR COMPUTING TEXTILE AND EFFECTIVE POROSITIES OF SURGICAL MESHES

V. Giacalone^1,2, V. Civilini^1,2, A. Audenino^1,2, M. Terzini^1,2

¹Department of Mechanical and Aerospace Engineering, Politecnico di Torino, 10129 Turin, Italy; ²PolitoBIOMed Lab, Politecnico di Torino, 10129 Turin, Italy

ID: 1080

QUANTIFYING THE EFFECT OF MUSCULOTENDON GEOMETRY UNCERTAINTY ON MUSCLE FORCE ESTIMATION DURING WALKING

A. Di Pietro¹, G. Davico², C. Curreli³, F. Di Puccio^1,4

¹Department of Civil and Industrial Engineering, University of Pisa, Italy; ²Department of Industrial Engineering, University of Bologna – Alma Mater Studiorum, Italy; ³Medical Technology Lab, IRCCS Rizzoli Orthopaedic Institute, Bologna, Italy; ⁴Center for Rehabilitative Medicine “Sport and Anatomy”, University of Pisa, Italy

ID: 527

EXPLORING THE DIVERSE MECHANICAL PROPERTIES OF SPIDER SILK IN VARIOUS TYPES AND SPECIES

S. Promnil, D. Liprandi, J. Wolff

Evolutionary Biomechanics, Zoological Institute and Museum, University of Greifswald, Germany

ID: 694

EFFECTS OF FEMORAL TUNNEL APERTURES ON GRAFT BENDING ANGLE IN CANINE CRANIAL CRUCIATE LIGAMENT RECONSTRUCTION

C.-H. Wu¹, C.-C. Lin²

¹Institute of Veterinary Clinical Science, National Taiwan University, Taiwan; ²Department of Electrical Engineering, Fu Jen Catholic University, Taiwan

ID: 1278

DINKIN: DIDACTIC TOOL FOR INVERSE KINEMATICS

G. Polanco¹, L. Zambrano², A. Lagunes¹

¹UiT The Arctic University of Norway, Norway; ²South East Technological University, SETU, Ireland

ID: 1308

SENSITIVITY ANALYSIS OF THE HYBRID CARDIOVASCULAR SIMULATION DEVICE

I. Ważydrąg¹, G. Milewski¹, J. Więcek², K. Szawiraacz², R. Major²

¹Department of Applied Mechanics and Biomechanics, Cracow University of Technology, Poland; ²Institute of Metallurgy and Materials Science Polish Academy of Sciences, Poland

ID: 1073

AUTOMATED WORKFLOW FOR CONSTRUCTING VIRTUAL TWINS FOR HAEMODYNAMIC ANALYSIS OF STENOSED NATIVE AORTIC VALVES

C. Teleanu^1,2, B. Matheson^1,2, H. Dou^1,2, G. Hyde-Linaker³, R. Bryan³, C. Shao⁴, N. Ravikumar^1,2, T. Lassila^1,2, A. F. Frangi^2,5,6, Z. A. Taylor^1,2, H. Mehari⁷

¹University of Leeds, United Kingdom; ²Centre for Computational Imaging and Simulation Technologies in Biomedicine (CISTIB), United Kingdom; ³Synopsys, Inc., United Kingdom; ⁴ANSYS, Inc., France; ⁵Christabel Pankhurst Institute for Health Technology, United Kingdom; ⁶University of Manchester, United Kingdom; ⁷The Royal College of Surgeons in Ireland

ID: 579

EFFECTS OF OCCUPANT BEHAVIOR ON HEAD ACCELERATION IN A LEVEL 3 AUTONOMOUS VEHICLE DRIVING SIMULATOR

A. OLAYAN, B. SANDOZ, J.-R. CHARDONNET

Arts et Métiers Institute of Technology, France

ID: 1220

ESTIMATING MATERIAL PARAMETERS OF GOAT TIBIA UNDER IMPACT BENDING USING INVERSE CHARACTERIZATION METHOD

A. Malik, A. Baranwal, A. Chawla, N. V. Datla

Indian Institute of Technology Delhi, New Delhi, India

ID: 400

ELUCIDATING THE EFFECT OF ZETA POTENTIAL AND PARTICLE SIZE ON NANOPARTICLE DIFFUSION IN BRAIN TUMOURS

Y. Yang¹, T. Yuan², Y. Zhou¹, W. Zhan¹

¹University of Aberdeen, United Kingdom; ²Imperial College London, United Kingdom

ID: 306

CRYSTALLINE LENS WOBBLING: IN VIVO AND OPTOMECHANICAL SIMULATION RESULTS

A. Dahaghin¹, M. Salimibani¹, A. Boszczyk¹, A. Jóźwik¹, D. Siedlecki¹, J. Grasa²

¹Department of Optics and Photonics, Wroclaw University of Science and Technology, Wrocław, Poland; ²Aragón Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain

ID: 493

HEALTHY, INJURED AND PLASMA-TREATED CORNEA: TENSILE TESTS AND FEM ANALYSIS BY A WHOLE EYE MODEL

E. L. Carniel^1,2, M. V. Mascolini¹, I. Toniolo^1,2, U. Menegatti³, S. Neri⁴, A. Peruffo⁵, A. Perazzi⁴, C. Fontanella^1,2

¹Department of Industrial Engineering, University of Padova, Italy; ²Centre for Mechanics of Biological Materials, University of Padova, Italy; ³Department of Information Engineering, University of Padova, Italy; ⁴Department of Animal Medicine, Production and Health, University of Padova, Italy; ⁵Department of Comparative Biomedicine and Food Science, University of Padua, Italy

ID: 976

CORRELATION BETWEEN INTERNAL AND EXTERNAL BONY PELVIS DIMENSIONS IN NULLIPAROUS WOMEN

L. Hynčík¹, M. Jansová¹, V. Nováček¹, M. Němec², L. Krofta², L. Hájková Hympánová²

¹New Technologies – Research Centre, University of West Bohemia, Czech Republic; ²Institute for the Care of Mother and Child, Third Faculty of Medicine, Charles University, Czech Republic

ID: 1336

CHARACTERIZATION OF BIODEGRADABLE PCL COG THREADS FOR PELVIC ORGAN PROLAPSE TREATMENT

F. A. Teixeira Pinheiro¹, M. E. Silva², A. A. Fernandes², A. Jesus², N. Alves³, A. C. Maurício⁴

¹LAETA, INEGI, ICBAS, Universidade do Porto, Portugal, Portugal; ²LAETA, INEGI, FEUP, Porto, Portugal; ³LAETA, CECA-ICETA, All4Animals, ICBAS, Universidade do Porto, Portugal; ⁴CDRSP, Instituto Politécnico de Leiria, Marinha Grande, Portugal.

ID: 1099

A NEW CLINICAL TOOL FOR THE REGULATION OF ECMO SUPPORT IN PATIENTS UNDER CARDIAC SHOCK

E. Gasparotti¹, E. Vignali¹, D. Haxhiademi², S. Celi¹

¹BioCardioLab, Bioengineering Unit, Fondazione Monasterio, Italy; ²Intensive Care Unit, Fondazione Monasterio, Italy

ID: 1306

ASSESSMENT OF MUSCLE FUNCTION AND GAIT ASYMMETRY AFTER A STRAYER PROCEDURE APPLIED TO A CHILD WITH CEREBRAL PALSY

L. Cunha¹, B. Gonçalves², R. Mateus³, A. Prieto Veloso³

¹NOVA University Lisbon, Portugal; ²University of Vienna, Vienna; ³CIPER, Faculty of Human Kinetics - University of Lisbon, Portugal

ID: 648

PATIENT VARIABILITY IN EXERCISE-INDUCED PRESSURE DROP ACROSS AORTIC COARCTATIONS

P. J. Nair¹, E. Perra², D. B. McElhinney¹, A. L. Marsden¹, D. B. Ennis¹, S. A. Dual²

¹Stanford University, USA; ²KTH Royal Institute of Technology, Sweden

ID: 420

CHARACTERIZATION OF TRACHEOBRONCHIAL FLUID DYNAMICS

J. C. Dinis^1,3, R. B. Ruben^1,2, M. S. Carvalho^3,4, M. Brito^3,4

¹ESTG Polytechnic of Leiria, Portugal, Portugal; ²CDRsp, Polytechnic of Leiria, Portugal; ³UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, Universidade Nova de Lisboa, Portugal; ⁴Laboratório Associado de Sistemas Inteligentes, LASI, 4800-058 Guimarães, Portugal