Conference Agenda

11:00am - 11:10am
ID: 201

A PATIENT-MATCHED ADDITIVELY MANUFACTURED PROSTHESIS FOR THUMB AMPUTATIONS: BIOMECHANICAL EVALUATION AND CADAVER STUDY

C. Bregoli¹, J. Fiocchi¹, F. Stacchiotti^2,3, C. A. Biffi¹, K. Morellato³, R. Adani⁴, M. Lando⁴, M. Rampoldi⁵, P. Di Sette⁵, E. Gruppioni³, A. Tuissi¹

¹National Research Council (CNR-ICMATE), Italy; ²Istituto Biorobotica, Scuola Superiore Sant’Anna, Pisa, Italy;; ³INAIL Centro protesi, Bologna, Italy; ⁴Dipartimento di chirurgia e microchirurgia della mano, Policlinico di Modena, Italy; ⁵UOC Chirurgia Ricostruttiva della Mano, CTO Alesini, Roma, Italy

11:10am - 11:20am
ID: 211

FEM-BASED TOPOLOGY OPTIMIZATION APPROACH FOR 3D PRINTING OF TRANSTIBIAL PROSTHETIC SOCKET

C. Falcinelli¹, I. Bianchi², A. Carugno¹, A. Forcellese²

¹University G d'Annunzio Chieti-Pescara, Italy; ²Università Politecnica delle Marche, Italy

11:20am - 11:30am
ID: 582

MECHANICAL PROPERTIES OF 3D PRINTED INTERVERTEBRAL DISCS FOR AN ACTUATED CERVICAL SPINE MODEL

R. S. Vraitch¹, J. Smithies¹, P. Obunike¹, P. Geoghegan¹, X. Ma¹, E. Theodosiou¹, F. Giorgio-Serchi², A. Gardner³, J.-B.R. G. Souppez¹

¹Aston University, United Kingdom; ²University of Edinburgh, United Kingdom; ³Royal Orthopaedic Hospital, United Kingdom

11:30am - 11:40am
ID: 755

SPORTS ORTHOSES IN MAGNESIUM: AN INNOVATIVE APPLICATION OF LASER POWDER BED FUSION

F. Volonte', J. Romanò, L. Garavaglia, F. Lazzari, S. Pittaccio

National Research Council of Italy, Institute of Condensed Matter Physics and Technologies for Energy (CNR-ICMATE), Italy

11:40am - 11:50am
ID: 876

DESIGNING SKELETAL GYROID STRUCTURES FOR ORTHOPEDIC IMPLANT APPLICATIONS

C. Hou¹, M. Goris¹, D. Rosseel¹, B. Vrancken^1,2, K. Denis¹

¹KU Leuven, Department of Mechanical Engineering, Belgium; ²Flanders Make@KU Leuven, Belgium

11:50am - 12:00pm
ID: 938

3D MODEL OF BLOOD VESSEL: OPTIMIZATION OF BIOFABRICATION PROCESS AND PRELIMINARY RESULTS

M. Conti, F. Scocozza

DICAr, The University of Pavia, Via Ferrata 3, 27100, Pavia

12:00pm - 12:10pm
ID: 949

MULTI-OBJECTIVE FUNCTION OPTIMISATION TO DESIGN & MANUFACTURE PATIENT SPECIFIC 3D PRINTED STENTS TO TREAT AORTIC COARCTATION

R. D. Johnston^1,2,3, C. McKenna^1,2, C. O'Keeffe^1,2, N. Linnane^1,2,4,5, S. Bose^1,2,3, S. Geraghty^1,2,3, D. Kenny^4,5, C. Lally^1,2,3

¹Trinity Centre for Bioengineering, Trinity College Dublin, Dublin 2, Ireland; ²Department of Mechanical, Manufacturing and Biomedical Engineering, School of Engineering, Trinity College Dublin, Dublin 2, Ireland; ³Advanced Materials and Bioengineering Research Centre (AMBER), Trinity College Dublin, Dublin, Ireland; ⁴Royal College of Surgeons, RCSI, Dublin, Ireland; ⁵Children’s Health Ireland at Crumlin, Dublin 12, Ireland

12:10pm - 12:20pm
ID: 1034

MICROMECHANICAL CHARACTERIZATION OF A 3D-PRINTED PLA/HA COMPOSITE FOR GUIDED BONE REGENERATION APPLICATIONS

I. Rota, D. Bertolo, P. Vena, D. Gastaldi

Department of Chemistry, Materials and Chemical Engineering “Giulio Natta” - Laboratory of Biological Structures Mechanics (LaBS) - Politecnico di Milano, Italy

12:20pm - 12:30pm
ID: 1055

LEFT ATRIAL APPENDAGE OCCLUSION: A 3D PRINTED SIMULATOR FOR THE PATIENT-SPECIFIC PROCEDURAL PLANNING AND TRAINING

B. M. Fanni¹, E. Gasparotti¹, A. Esposito², F. Danielli³, F. Berti³, S. Berti², G. Pennati³, L. Petrini⁴, S. Celi¹

¹BioCardioLab, Bioengineering Unit, Fondazione Monasterio, Italy; ²Adult Cardiology Unit, Fondazione Monasterio, Massa, Italy; ³Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Italy; ⁴Department of Civil and Environmental Engineering, Politecnico di Milano, Italy

12:30pm - 12:40pm
ID: 1106

BIOMEDICAL APPLICATIONS OF POLYETHER-2-KETONE (PEKK): A COMPREHENSIVE MULTISCALE MECHANICAL ANALYSIS

G. Serino¹, F. Distefano², E. M. Zanetti³, G. Pascoletti³, G. Epasto²

¹Department of Mechanical and Aerospace Engineering, PolitoBIOMed Lab, Politecnico di Torino, Italy; ²Department of Engineering, University of Messina, Italy; ³Department of Engineering, University of Perugia, Italy

12:40pm - 12:50pm
ID: 1217

SUB-ZERO BIOPRINTING FOR THE PRODUCTION OF MULTI-LAYERED BIOMATERIALS TAILORED FOR VASCULAR APPLICATIONS

A. Panieraki, N. Mahmoodi, R. Dyson, L. E. J. Thomas-Seale

University of Birmingham, United Kingdom