Conference Agenda

TOMOSAXS: MULTIMODAL VOLUMETRIC ANALYSIS OF COLLAGEN NANO-TO-MICROSTRUCTURE

E. Newham, A. Parmenter, C. Disney, N. J. Terrill, H. Deyhle, P. D Lee, H. S Gupta

AN INTEGRATED FRAMEWORK FOR EVALUATING MECHANICAL PROPERTIES AND STRUCTURE OF ARTICULAR CARTILAGE

M. Berni, C. Golini, C. Testa, L. Brizi, N. F. Lopomo, M. Baleani

CYCLIC LOADING OF HEALTHY AND DEGRADED CARTILAGE AND THE 3D COLLAGEN FIBRILLAR RESPONSE

S. R. Inamdar, S. Prévost, N. Terrill, M. Knight, H. Gupta

MECHANICAL CHARACTERISATION OF LOWER LIMB VASCULATURE IN DETERMINING AUTOGRAFT SUITABILITY FOR PERIPHERAL ARTERIAL DISEASE BYPASS SURGERIES

C. McCarthy, K. L McKevitt, J. M Allardyce, K. D McGourty, F. C Leahy, E. G Kavanagh, M. A Moloney, M. T Walsh, J. J E Mulvihill

NANOSCALE STRUCTURAL CHANGES IN BONE CARTILAGE UNIT SUBJECTED TO COMPRESSIVE LOADS

W. Badar, O. N Brooker, N. J Terrill, T. Snow, P. Fratzl, M. M Knight, H. S Gupta

DYNAMIC TENSILE CHARACTERIZATION OF PORCINE BRONCHI

P. Yeswanth, A. Chawla, N. Datla

MEASUREMENTS OF THE MECHANICAL PROPERTIES OF SKELETAL MUSCLE BY ULTRASONIC ELASTOGRAPHY AND SHEARING TESTS

P. LUBIN, M. ZIDI

IN-SITU DETERMINATION OF SPATIAL STRAIN MAPS IN PORCINE GROWTH PLATES BASED ON MRI LOADING EXPERIMENTS

J. Schwer, L. Hucke, V. Rasche, A. Wittek, A. M. Seitz

EFFECT OF HUMERAL ROTATION ON ROTATOR CUFF STRAIN, LOADING AND KINEMATICS: AN IN-VITRO STUDY

I. Santos, L. Pichler, C. Thorwächter, M. F. Pietschmann, M. Tauber, P. E. Müller

MULTIDIC AND DUODIC: OPEN-SOURCE SOFTWARE FOR 3D DIGITAL IMAGE CORRELATION AND THEIR APPLICATIONS IN BIOMECHANICS

D. Solav

IN VITRO CHARACTERIZATION OF LOAD TRANSFER IN CERVICAL DISC REPLACEMENT ARTHROPLASTY

A. Ramos, G. Costa, M. Mesnard

VALIDATION OF OSTEOPOROTIC SYNTHETIC FEMORA – A MORE REALISTIC ALTERNATIVE TO EPOXY BONES?

M. Hollensteiner, S. Sandriesser, P. Augat

AN EXHAUSTIVE TEST PROTOCOL FOR THE MECHANICAL CHARACTERIZATION OF SURGICAL MESHES

V. Civilini, V. Giacalone, A. L. Audenino, M. Terzini

WHAT DO SURGEONS HEAR AND FEEL WHEN BREACHING CORTICAL WALLS AND HOW DO BREACHES EFFECT SCREW PURCHASE?

T. Lange, M. P. Russo, J. J. Costi, K. J. Reynolds

IMAGING AND MECHANICAL CHARACTERISATION OF HUMAN BLOOD CLOT ANALOGUES WITH DIFFERENT COMPOSITIONS AND DEGREES OF CONTRACTION

R. Cahalane, J. Cruts, A. Rachid, K. van Gaalen, H. van Beusekom, M. de Maat, M. Dijkshoorn, N. Boodt, A. van der Lugt, F. Gijsen

CHARACTERIZING PORO-VISCOELASTIC MATERIAL PROPERTIES OF BRAIN TISSUE-MIMICKING HYDROGELS

M. P. Kainz, A. Greiner, J. Hinrichsen, D. Kolb, E. Comellas, P. Steinmann, S. Budday, M. Terzano, G. A. Holzapfel

THE GAPPING BEHAVIOUR OF THE MENISCUS VARIES ACCORDING TO THE TEAR TYPE

M. Sukopp, J. Frey, M. Kalbitz, A. Ignatius, A. M. Seitz

PATELLA DESIGN AND ISOLATED EFFECTS OF PATELLAR RESURFACING IN TOTAL KNEE ARTHROPLASTY

A. Sauer, C. Thorwaechter, I. Dupraz, A. Maas, A. Steinbrueck, T. M. Grupp, M. Woiczinski

HOW WELL DOES A NEW DEVELOPED PIVOT TKA RESTORE THE NATIVE KINEMATICS: A CADAVERIC STUDY

C. Thorwächter, B. Richter, B. Altermann, A. Bollinger, H. Windhagen, B. Holzapfel, P. Müller, T. Grupp, M. Woiczinski

INFLUENCE OF BIOMECHANICAL LOADING ON THE PHYSICAL BEHAVIOR OF A HYDROGEL AFTER INJECTION INTO NATIVE HUMAN KNEES

S. Krüger, S. A. Brendle, K. Benz, C. Merckle, T. M. Grupp

USE OF AN INDUSTRIAL ROBOT TO RECORD HUMAN KNEE KINEMATICS IN VITRO - EVALUATION OF THE TEST METHOD

M. Nusser, L. Kiener, A. Gomez, G. Tschupp

FRACTURE MANAGEMENT STRATEGIES INFLUENCE THE FRACTURE HEMATOMA PROTEOME AFTER MULTIPLE TRAUMA.

C. Kuik, R. V. M. Groven, J. Greven, Ü. Mert, F. G. Bouwman, M. Huber-Lang, F. Hildebrand, T. Blokhuis, M. van Griensven, B. Cillero-Pastor

COMPUTATIONAL MODELING FOR EVALUATING THE EFFECTIVENESS OF PROTECTIVE PLATES IN NON-PENETRATING BALLISTIC IMPACTS

M. Lustig, Y. Epstein, A. Gefen

A MUSCLE MODEL FOR INJURY SIMULATION

M. Millard, F. Kempter, J. Fehr, N. Stutzig, T. Siebert

CERVICAL MUSCLE REFLEXES DURING LATERAL ACCELERATIONS

M. Millard, S. Hunger, L. Bross, J. Fehr, C. Holzapfel, N. Stutzig, T. Siebert

DEVELOPMENT OF A HEAD ACCELERATION EVENT CLASSIFICATION ALGORITHM FOR FEMALE RUGBY UNION

D. R. L. Powell, F. J. Petrie, P. D. Docherty, H. Arora, E. M. P. Williams

PREDICTION OF OVERLOADING FAILURE OF OSTEOSYNTHESIS PLATES USING VALIDATED FINITE ELEMENT SIMULATIONS

D. Mischler, A. Valenti, P. Varga

TOWARDS UNBIASED AND ACCURATE SIMULATIONS OF SCREW-BONE CONSTRUCTS WITH HOMOGENIZED FE MODELS

A. Synek, L. Ortner, D. Pahr

SIMPLIFIED SCREW-BONE INTERFACE MODELS FOR COMPUTATIONALLY EFFICIENT µFE SIMULATIONS

P. Stefanek, D. H. Pahr, A. Synek

FE ANALYSIS OF AN EXTERNAL STABILIZER APPLIED IN TREATMENT OF THE PROXIMAL PHALANX FRACTURE IN HORSES

M. Pawlikowski, K. Jankowski, B. Turek

DETERMINATION OF THE INTERNAL LOADS OF THE PROXIMAL PHALANX DURING REHABILITATION EXERCISES

P. Schwarzenberg, T. Colding-Rasmussen, D. J. Hutchinson, J. San Jacinto Garcia, V. Granskog, T. Pastor, T. Weis, M. Malkoch, C. Wong, P. Varga

DEVELOPMENT OF 3D PRINTED PATIENT-SPECIFIC SCAPHOID IMPLANT TO ACHIEVE CUSTOMISED SCAPHOID REPLACEMENT

S. L. Teng, F. Li, K. Y. Chung, A. Y. H. Chin, Y. R. Wong

INFLUENCE OF ANISOTROPIC CORTICAL BONE PROPERTIES IN PERIPROSTHETIC HIP FRACTURES

Ö. Cebeci, D. Cronin, M. Sämann, S. Checa

COATINGS OSTEOINDUCTIVE EFFECT CALIBRATION IN ASEPTIC LOOSENING SIMULATION OF ANIMAL OSTEOINTEGRATION EXPERIMENT

S. Baroni, S. Oliviero, A. A. La Mattina, M. Viceconti

PATIENT-SPECIFIC FINITE ELEMENT MODEL FOR INTRAOPERATIVE FRACTURES PREDICTION WITH A COMMERCIAL DESIGN

M. Petrucci, A. A. La Mattina, C. Curreli, M. Viceconti

DISRUPTED LUBRICATION METHODOLOGY TO REPLICATE SQUEAKING ON CERAMIC ON CERAMIC HIP JOINT REPLACEMENTS

O. O'Dwyer Lancaster-Jones

SAME OFFSET, DIFFERENT STABILITY: HOW HEAD LENGTH AFFECTS TAPER JUNCTION MICROMOTIONS IN TOTAL HIP ARTHROPLASTY

F. A. Bologna, G. Putame, A. L. Audenino, M. Terzini

BIOMECHANICAL ANALYSIS OF HIP CEMENTLESS FEMORAL STEM DESIGNS IN PHYSIOLOGICAL AND OSTEOPOROTIC BONE DURING DIFFERENT STATIC LOADS

E. Bori, M. Formica, A. Zanirato, T. A. Revetria, J. Ditting, B. Innocenti

ONLY IN UNLOADED ACTIVITIES TKA DESIGN FEATURES DOMINATE IN THE AMOUNT OF ROLLING AND SLIDING

P. Moewis, R. Ehrig, H. Hommel, A. Trepczynski, L. Krahl, G. N Duda

SIX DOF KNEE GAIT KINEMATICS OF KINEMATIC ALIGNED TKA

A.-K. Einfeldt, L. Tücking, P. Savov, M. Ettinger, H. Windhagen, E. Jakubowitz

FE STUDY ON THE EFFECT OF PATIENT-RELATED VARIATIONS ON THE PRIMARY FIXATION OF A CEMENTLESS PEEK TIBIAL COMPONENT

C. Post, T. Bitter, I. van Langen, A. Briscoe, N. Verdonschot, D. Janssen

STUDY OF THE LOCATIONS AND MORPHOLOGY OF ISOLATED KNEE FOCAL CARTILAGE DEFECTS USING A STATISTICAL SHAPE MODELING APPROACH

M. Mohammad Sadeghi, E. Aşık, P. Emans, N. Tümer, G. Tuijthof, A. Roth

INFLUENCE OF LOADING CONDITION ON THE ABILITY TO PREDICT HUMERAL STRESS SHIELDING

C. Mueri, A. Henderson, G. Maquer, J. Bischoff, H. Seyed Hosseini, P. Favre

THE ROLE OF STATISTICAL SHAPE MODELS IN THE DESIGN FRAMEWORK OF OSSEOINTEGRATED IMPLANTS FOR DISTAL FEMUR

V. Betti, A. Aldieri, G. Galteri, M. L. Ruspi, K. Morellato, E. Gruppioni, M. Palanca, L. Cristofolini

IMPLANT STABILITY AND LOAD TRANSFER OF OSSEOINTEGRATED TRANSFEMORAL PROSTHESIS

G. Galteri, M. Palanca, V. Betti, K. Morellato, E. Gruppioni, L. Cristofolini

REASONS FOR OSTEOPENIA IN ABOVE THE KNEE AMPUTEES: A BIOMECHANICAL EXPLANATION

J. L. Zavaleta Ruiz, M. J Major, P. Pankaj

DEVELOPMENT OF A PIPELINE FOR 3D PRINTED CUSTOMIZED PLANTAR FOOT ORTHOSIS BASED ON FEM AND GAIT ANALYSIS

Z. Sawacha, M. Crosato, E. Bertoncello, A. Guiotto

VERIFICATION OF A PASSIVE ANKLE-FOOT ORTHOSIS DESIGN METHOD BY USING TRUSS MODELS

D. Scherb, P. Steck, S. Wartzack, J. Miehling

CONTACT AREA AND CONTACT PRESSURE IN KNEE IMPLANTS: COMPARISON OF DIFFERENT TESTING AND FE METHODS

J.-B. Weiß, H. Bächle, S. Krüger, T. M. Grupp

WEAR RATE COMPARISON BETWEEN ADDITIVE MANUFACTURED AND CASTED FEMORAL COMPONENTS

A. L. Puente Reyna, J. Schwiesau, T. M. Grupp

STRUCTURAL ANALYSIS OF METALLIC ORTHOPAEDIC IMPLANTS BASED ON ASTM STANDARDS: A SOFTWARE COMPARISON STUDY

F. Guidolin, L. Modenese

EFFECT OF DESIGN PARAMETERS IN FB & MB UKA BIOMECHANICS

B. Innocenti, E. Bori, T. Luyckx

KINEMATIC VS MECHANICAL ALIGNMENT IN MEDIALLY-STABILISED TKA: A MATCHED-PAIRS KINEMATIC ANALYSIS

O. Taylan, D. Shah, F. Dandois, W. Han, P. Van Overschelde, L. Scheys

VALIDATION OF A KNEE FINITE ELEMENT MODEL FOR THE DEVELOPMENT OF SURGICAL TRAINING MODELS

K. J. Bennett, P. Foroutan, E. Fairweather, R. Al-Dirini, S. Martelli, S. A Sobey, N. Litchfield, M. Roe, K. J Reynolds, J. J Costi, M. Taylor

CONSIDERING MIXED EPISTEMIC AND ALEATORIC UNCERTAINTY IN THE STRUCTURAL VALIDATION OF A SAPIEN-3 TAVI FEM-MODEL

N. Götzen, O. Zahalka, T. Turgut, S. Pasta, V. Bouwman

EFFECT OF THE LUMBAR BELT ON TRUNK MOBILITY: A COMPARATIVE CLINICAL STUDY

A. ERRABITY, J. P. Vasco Marin, R. Bonnaire, W.-S. Han, R. Pannetier, R. Convert, P. Calmels, J. Molimard

INVESTIGATING CERVICAL COLLAR DESIGN AND FIT: INTERFACE PRESSURE AND DISCOMFORT

L. J. Russell, L. Jiang, D. Filingeri, P. R. Worsley

FINITE ELEMENT MODEL FOR THE TREATMENT OF PLAGIOCEPHALY BY CRANIAL ORTHESIS.

G. Vallois, E. Marty, C. Cavinato, F. Jourdan

A PIPELINE FOR MECHANOBIOLOGY-DRIVEN DESIGN OF SCAFFOLD

M. J. A. Bedding-Tyrrell, F. Zhao

DATA-DRIVEN GENERATION OF INLET VELOCITY PROFILES FOR CFD MODELLING IN THORACIC AORTIC ANEURYSMS

S. Saitta, L. Maga, C. H. Armour, E. Votta, D. P. O’Regan, M. Y. Salmasi, T. Athanasiou, J. W. Weinsaft, X. Y. Xu, A. Redaelli, S. Pirola

IN SEARCH OF CARDIOVASCULAR BIOMARKERS FOR PRE-ECLAMPSIA

R. van Loon, C. Popp, D. Kernot, J. Carson, H. Arora, J. Myers, E. Johnstone

MODELLING OF CELL-SCALE HAEMODYNAMICS IN THE MATERNAL INTERVILLOUS SPACE OF HUMAN PLACENTA

Q. Zhou, E. Doman, I. L. Chernyavsky, O. E. Jensen, M. O. Bernabeu, T. Krüger

NUMERICAL STUDY OF MAGNETIC MICRO-BEADS STEER BY MAGNETIC RESONANCE NAVIGATION IN TUMOR EMBOLIZATION

M. Rezaei Adariani, J. Pešek, N. Li, C. Debbaut, G. Soulez, I. Vignon-Clementel

MODELLING BLOOD FLOW IN A MICRO-VESSEL BIFURCATION

Y. Xue, S. Payne, S. Waters