Conference Agenda

HAEMODYNAMIC ANALYSIS OF DIFFERENT SURGICAL STRATEGIES OF A TYPE-B AORTIC DISSECTION VIA VIRTUAL GRAFTING

L. Girardin^1,2, C. Stokes^1,2, M. S. Thet³, A. Y. Oo³, S. Balabani^1,2, V. Diaz^1,2

¹University College London, United Kingdom; ²Wellcome/ESPRC Centre for Interventional and Surgical Sciences (WEISS); ³St Bartholomew's Hospital

FSI COMPUTATIONAL MODEL OF A PATIENT SPECIFIC AAA VALIDATED BY LED ILLUMINATED PIV

F. Bardi^1,2,3, M. N. Antonuccio^1,2, E. Gasparotti¹, E. Vignali¹, M. Aguirre², S. Avril², S. Celi¹

¹BioCardioLab, Fondazione Toscana “G. Monasterio”, Italy; ²Ecole des Mines de Saint-Etienne, France; ³PrediSurge, France

MODELLING AORTIC FLOWS: IMPACT OF WALL DISPLACEMENTS ON LARGE-SCALE HEMODYNAMIC COHERENCE IN ASCENDING AORTA

K. Calò¹, K. Capellini², G. De Nisco¹, V. Mazzi¹, E. Gasparotti², D. Gallo¹, S. Celi², U. Morbiducci¹

¹PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy; ²BioCardioLab, Bioengineering Unit – Heart Hospital, Fondazione Toscana “G. Monasterio”, Massa, Italy

IN SILICO HEMODYNAMICAL SIMULATIONS SHOW SECONDARY BENEFITS OF ANTIHYPERTENSIVE DRUGS

J. Jagos¹, J. Kohut¹, T. Novotny², T. Krivka², P. Hajek¹, M. Formanek¹, J. Bursa¹

¹Brno University of Technology, Czech Republic; ²St. Anne’s University Hospital in Brno, Czech Republic

A COMBINED CFD AND MESH MOPHING TECHNIQUE TO INVESTIGATE THORACIC AORTA HEMODYNAMICS

F. Dell'Agnello^1,2, M. A. Scarpolini^1,3, K. Capellini¹, E. Vignali¹, E. Gasparotti¹, F. Cademartiri⁴, S. Celi¹

¹BioCardioLab, Fondazione Toscana Gabriele Monasterio, Italy; ²Department of Information Engineering, University of Pisa, Italy; ³Department of Industrial Engineering, University of Rome “Tor Vergata”, Italy; ⁴Clinical Imaging Department, Fondazione Toscana Gabriele Monasterio, Italy

BIOMIMETIC 3D PRINTED INTERFACES

M. J. Mirzaali¹, M. C. Saldivar¹, E. Tay¹, Z. Doubrovski², A. A. Zadpoor¹

¹Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), The Netherlands; ²Faculty of Industrial Design Engineering (IDE), Delft University of Technology (TU Delft), The Netherlands

OSTEOINDUCTIVE SCAFFOLD DESIGN: DIGITAL OPTIMISATION AND PREVENTION OF OVER-SPECIALISATION

C. Villette¹, L. Stoecker², L. Geris^1,3, M. Castilho²

¹KU Leuven, Belgium; ²Eindhoven University of Technology, The Netherlands; ³University of Liège, Belgium

USING MELT-ELECTROWRITTEN FIBROUS MESH TO ELEVATE FLUID PRESSURISATION IN HYDROGELS

E. K. Moo^1,2, M. Ebrahimi², A. Hrynevich³, M. de Ruijter³, M. Castilho^3,4, J. Malda³, R. K. Korhonen²

¹Carleton University, Canada; ²University of Eastern Finland, Finland; ³University Medical Center Utrecht; ⁴Eindhoven University of Technology, the Netherlands

BIOMECHANICAL CHARACTERIZATION OF A SILK FIBROIN-BASED BIOINK FOR 3D PRINTING IN TISSUE REGENERATION

G. M. Di Gravina¹, E. Bari², F. Scocozza¹, S. Perteghella¹, B. Frongia¹, S. Tengattini¹, L. Segale², M. L. Torre², M. Conti¹

¹University of Pavia, Italy; ²University of Piemonte Orientale, Novara, Italy

NATURE-INSPIRED TOUGHENING MECHANISM OF 3D PRINTED HYDROXYAPATITE SCAFFOLDS FOR BONE TISSUE ENGINEERING

L. D'Andrea¹, T. Yang², M. Dao², P. Vena¹

¹Politecnico di Milano, Italy; ²Massachusetts Institute of Technology, USA

X-RAY CT ASSESSMENT OF LUNG FUNCTION AND BIOMECHANICS

S. Bayat¹, A. Bravin², L. Broche³, J.-L. Cercos-Pita⁴, R. Deyhle⁵, L. Fardin¹, I. Mahmutovic⁵, L. E Olsson⁵, M. Orkisz⁶, G. Perchiazzi⁴, J.-C. Richard⁶, M. Shekarnabi^1,6

¹Univ. Grenoble Alpes, France; ²University Milano Bicocca; ³European Synchrotron Radiation Facility; ⁴Uppsala University, Hedenstierna Laboratory, Uppsala, Sweden; ⁵Medical Radiation Physics, Department of Translational Medicine, Lund University; ⁶Univ. Lyon, Universit´e Claude Bernard Lyon 1, INSA-Lyon, CNRS, Inserm, CREATIS UMR 5220, U1294

A MULTI-SCALE PHYSICS-BASED COMPUTATIONAL MODEL OF MECHANICAL VENTILATION IN COVID-19 PATIENTS

S. Middleton¹, S. M Peach², A. Ju², S. George², A. Vadati²

¹Duke University, USA; ²East Carolina University, USA

A REALISTIC ALVEOLAR DUCT MODEL FOR USE IN WHOLE-LUNG RESPIRATORY SIMULATIONS OF MECHANICAL VENTILATION

S. Quicken¹, E. Schuijt¹, R. Segers², F. van de Vosse¹

¹Department of Biomedical Engineering, Eindhoven University of Technology, the Netherlands; ²Department of Intensive Care, Maastricht University Medical Center+, the Netherlands

TOMOSAXS: MULTIMODAL VOLUMETRIC ANALYSIS OF COLLAGEN NANO-TO-MICROSTRUCTURE

E. Newham¹, A. Parmenter², C. Disney³, N. J. Terrill³, H. Deyhle³, P. D Lee², H. S Gupta¹

¹Queen Mary University of London, United Kingdom; ²University College London, United Kingdom; ³Diamond Light Source, United Kingdom

AN INTEGRATED FRAMEWORK FOR EVALUATING MECHANICAL PROPERTIES AND STRUCTURE OF ARTICULAR CARTILAGE

M. Berni¹, C. Golini², C. Testa², L. Brizi², N. F. Lopomo³, M. Baleani¹

¹IRCCS Istituto Ortopedico Rizzoli, Medical Technology Laboratory, Italy; ²University of Bologna, Department of Physics and Astronomy, Italy; ³University of Brescia, Department of Information Engineering, Italy

CYCLIC LOADING OF HEALTHY AND DEGRADED CARTILAGE AND THE 3D COLLAGEN FIBRILLAR RESPONSE

S. R. Inamdar¹, S. Prévost², N. Terrill³, M. Knight¹, H. Gupta¹

¹Queen Mary University of London, United Kingdom; ²Beamline ID02, European Synchrotron Radiation Facility, Grenoble, France; ³Diamond Light Source, Harwell Science and Innovation Campus, Harwell, UK

MECHANICAL CHARACTERISATION OF LOWER LIMB VASCULATURE IN DETERMINING AUTOGRAFT SUITABILITY FOR PERIPHERAL ARTERIAL DISEASE BYPASS SURGERIES

C. McCarthy¹, K. L McKevitt¹, J. M Allardyce¹, K. D McGourty¹, F. C Leahy², E. G Kavanagh², M. A Moloney², M. T Walsh¹, J. J E Mulvihill¹

¹Bernal Institute, University of Limerick, Limerick, Ireland; ²University Hospital Limerick, Limerick, Ireland

NANOSCALE STRUCTURAL CHANGES IN BONE CARTILAGE UNIT SUBJECTED TO COMPRESSIVE LOADS

W. Badar¹, O. N Brooker¹, N. J Terrill², T. Snow², P. Fratzl³, M. M Knight¹, H. S Gupta¹

¹School of Engineering and Materials Science, Queen Mary University of London, London,UK; ²Harwell Science and Innovation Campus, Diamond Light Source, Harwell, UK; ³Department of Biomaterials, Max-Planck-Institute of Colloids and Interfaces, Potsdam, Germany

CHARACTERIZATION OF VISCOELASTICITY AND DAMAGE ON ARTERIES FROM HYPOXIC GUINEA PIGS

A. Bezmalinovic¹, Á. Navarrete¹, C. García-Herrera¹, D. Celentano², M. Latorre³

¹Universidad de Santiago de Chile, Chile; ²Departamento de Ingeniería Mecánica y Metalúrgica, Pontificia Universidad Católica de Chile, Chile; ³Centro de Investigación e Innovación en Bioingeniería (Ci2B- UPV), Universitat Politécnica de Valencia, España

IMPACT OF SUPERCRITICAL CARBON DIOXIDE AS A DECELLULARIZATION AGENT FOR AORTIC TISSUE

I. V. Silva¹, M. M. Duarte¹, M. Sanna¹, I. Rodrigues², P. Mendes-Ferreira³, I. Pinto⁴, V. P. Ribeiro¹, R. Costa^1,2, A. L. Oliveira¹

¹Universidade Católica Portuguesa, CBQF - Centro de Biotecnologia e Química Fina – Laboratório Associado, Escola Superior de Biotecnologia, Portugal; ²Department of Biomedicine, Biochemistry Unit, Faculdade de Medicina, Universidade do Porto, Portugal; ³Cardiovascular R&D Center, Faculdade de Medicina, Universidade do Porto, Portugal; ⁴Seara, S.A., Vila Nova de Famalicão, Portugal

THICKNESS MEASUREMENT IN MECHANICAL SOFT TISSUE TESTING: VALIDATION AND UNCERTAINTY QUANTIFICATION

H. Fehervary^1,2, M. Wos¹, N. Famaey^1,2

¹FIBEr, KU Leuven Core Facility for Biomechanical Experimentation, Belgium; ²Biomechanics, Dpt. Mechanical Engineering, KU Leuven, Belgium

MULTI-MODAL NUMERICAL-EXPERIMENTAL SETUP TO IMPROVE THE IDENTIFIABILITY OF THE MATERIAL PARAMETERS OF SOFT TISSUES

Z. Oddes, N. Fougeron, A. Ashkenazi, D. Solav

Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel

A METHODOLOGICAL APPROACH TO INTERPRET AND COMPARE THE VISCOELASTIC BEHAVIOR OF BIOLOGICAL TISSUES AND HYDROGELS

G. Serino¹, M. Tosini¹, T. Tanzer^1,2, S. Villata³, D. Baruffaldi³, V. Monica⁴, L. Primo⁴, F. Frascella³, A. L. Audenino¹, D. Massai¹

¹PolitoBIOMed Lab and Department of Mechanical and Aerospace Engineering,Politecnico di Torino, Italy; ²École Polytechnique Fédérale de Lausanne, Switzerland; ³PolitoBIOMed Lab and Department of Applied Science and Technology, Politecnico di Torino, Italy; ⁴Department of Oncology, University of Torino, Italy

CONTRAST-ENHANCED MRA WITH GRASP OUTPERFORMS THE CONVENTIONAL TWIST IN AORTIC DISEASES PATIENTS COHORT

C. G. Calastra, F. Haupt, A. T. Huber, E. Kleban, H. von Tengg-Kobligk, B. Jung

Inselspital Bern, Switzerland

A MULTI SOURCE STATISTICAL SHAPE ANALYSIS FRAMEWORK FOR COMPLEX CARDIOVASCULAR STRUCTURES

M. Mazzoli^1,2, M. A. Scarpolini^1,3, B. M. Fanni¹, A. Monteleone⁴, F. Cademartiri⁴, S. Celi¹

¹BioCardioLab, Fondazione Toscana Gabriele Monasterio, Italy; ²Department of Information Engineering, University of Pisa, Italy; ³Department of Industrial Engineering, University of Rome "Tor Vergata"; ⁴Clinical Imaging Department, Fondazione Toscana Gabriele Monasterio, Italy

MEASUREMENT OF PRESSURE DROP IN ARTERIAL STENOSIS WITH COLOR DOPPLER IMAGING

S. Choupani^1,2, F. Varray¹, B. Gilles², J.-C. Béra², D. Garcia¹

¹CREATIS, CNRS, Inserm, Lyon, France; ²LabTau, Inserm, Lyon, France

CONTRAST-ENHANCED µCT FOR EX-VIVO DIGITAL RECONSTRUCTION OF WHOLE HEART AND MITRAL VALVE IN AN AGED POPULATION

H. Mehari Abraha^1,2, S. Javadpour¹, F. O'Brien^1,2,3, C. Conway^1,2

¹Tissue Engineering Research Group, Anatomy & Regenerative Medicine, Royal College of Surgeons in Ireland (RCSI), Ireland; ²Trinity Centre for BioEngineering (TCBE), Trinity College Dublin (TCD), Ireland; ³Advanced Materials and Bioengineering Research Centre (AMBER), Ireland

INTER AND INTRAMUSCULAR VARIABILITY OF RIGIDITY IN HEALTHY AND PARETIC MUSCLES: ULTRASOUND IMAGING

K. BELGHITH, M. ZIDI, W. MAKTOUF

Bioengineering, Tissues and Neuroplasticity, ER 7377, University of Paris-Est Creteil, Faculty of Medicine, Creteil, France

BIOMECHANICAL PROPERTIES OF 3D PRINTABLE MATERIAL USABLE FOR SYNTHETIC PERSONALIZED HEALTHY HUMAN AORTA

S. LIN¹, G. Tarris², C. Bernard², M. Kafi^1,2, P. M. Walker^1,2, D. M. Marín-Castrillón¹, C. Gobled³, A. Boucher¹, B. Presles¹, M. C. Morgant², A. Lalande^1,2, O. Bouchot^1,2

¹ICMUB, University of Burgundy, Dijon, France; ²University Hospital of Dijon, Dijon, France; ³ENNOIA company, Besançon, France

TOWARDS THE DEVELOPMENT OF A ZEBRAFISH ACTION POTENTIAL MODEL

L. Cestariolo¹, J. M. Ferrero², Z. Long³, T A. Quinn³, J. F. Rodriguez Matas¹

¹Politecnico di Milano, Italy; ²Universitat Politecnica de Valencia, Spain; ³Dalhousie University, Canada

ANISOTROPIC PROPERTY CHARACTERIZATION OF HUMAN CAROTID PLAQUES BY USING INVERSE FINITE ELEMENT MODELING

S. Guvenir Torun¹, B. Kaaij^1,2, P. de Miguel Munoz^1,2, H. Crielaard¹, H. J. Verhagen¹, G.-J. Kremers¹, A. F. van der Steen¹, A. C. Akyildiz^1,2

¹Erasmus Medical Center, Rotterdam, The Netherlands; ²Delft University of Technology, Delft, The Netherlands

AORTIC CALCIFICATIONS LOCALLY AFFECT DISSECTION BEHAVIOR

C. L. Donahue¹, R. Badal², V. H. Barocas¹

¹Department of Biomedical Engineering, University of Minnesota - Twin Cities, USA; ²Department of Mechanical Engineering, University of Minnesota - Twin Cities, USA

MEASUREMENT OF HIGH STRAIN TENSILE FAILURE PROPERTIES OF CAROTID PLAQUE EMBOLUS ANALOGS

J. Monclova, T. Barraclough, V. Kannojiya, F. Costanzo, S. Simon, K. Manning

The Pennsylvania State University, United States of America

CONTACT-PRESSURE BASED, MULTI-SCALE KNEE MODEL TO PREDICT CARTILAGE DEGENERATION

Y. Zhang¹, S. A. Elahi¹, I. Mohout¹, B. Killen¹, A. Esrafilian², R. Korhonen², I. Jonkers¹

¹KU Leuven, Belgium; ²University of Eastern Finland, Finland

USING AN EQUIVALENT SURFACE TO QUANTIFY CONGRUENCE AND CONTACT VARIABILITY IN JOINTS

C. B. Burson-Thomas, A. S. Dickinson, M. Browne

University of Southampton, United Kingdom

PARAMETRIC ANALYSIS OF OSTEOCHONDRAL GRAFTS IN HUMAN TIBIOFEMORAL JOINTS

G. A. Day, A. C Jones, M. Mengoni, R. K Wilcox

University of Leeds, United Kingdom

KNEE CARTILAGE MECHANICS IN FINITE ELEMENT ANALYSIS USING INPUTS FROM DIFFERENT MUSCULOSKELETAL SOFTWARE

J. P. J. Peitola¹, A. Esrafilian¹, A. S. A. Eskelinen¹, M. S. Andersen^2,3, R. K. Korhonen¹

¹University of Eastern Finland, Finland; ²Aalborg University, Denmark; ³Center for Mathematical Modeling of Knee Osteoarthritis, Aalborg, Denmark

QUANTIFYING CELL FORCES EXERTED BY CHONDROCYTES IN THE CONTEXT OF OSTEOARTHRITIS

M. Vovchenko^1,2, N. Vaes¹, R. Castro Viñuelas^3,4, J. Barrasa-Fano¹, L. Kimps¹, A. Shapeti¹, J. de Jong¹, I. Jonkers³, H. Van Oosterwyck^1,5

¹Biomechanics Section, Dept. of Mechanical Engineering, KU Leuven; ²Laboratory for Soft Matter and Biophysics, Dept. of Physics and Astronomy, KU Leuven, Belgium; ³Human Movement Biomechanics Research Group, Dept. of Movement Sciences, KU Leuven, Belgium; ⁴Laboratory for Tissue Homeostasis and Disease, Dept. of Development and Regeneration, Skeletal Biology and Engineering Research Center, KU Leuven, Belgium; ⁵Prometheus Division of Skeletal Tissue Engineering, KU Leuven, Belgium

THROMBUS MECHANICS: FROM MICROSTRUCTURE TO IMAGING AND DEVICE DESIGN

F. Gijsen^1,2

¹Erasmus Medical Center, Netherlands, The; ²Delft University of Technology, Netherlands, The

INVESTIGATING RUPTURE CHARACTERISTICS OF TISSUE-ENGINEERED ATHEROSCLEROTIC PLAQUE CAPS

H. Crielaard¹, T. B. Wissing^1,2, S. Guvenir Torun¹, P. de Miguel^1,3, G. J. Kremers¹, F. J. H. Gijsen^1,3, A. C. Akyildiz^1,3, K. van der Heiden^1,2

¹Erasmus MC, The Netherlands; ²Eindhoven University of Technology, The Netherlands; ³Delft University of Technology, The Netherlands

INFLUENCE OF WALL SHEAR AND MECHANICAL STRESS ON ATHEROSCLEROTIC ARTERY DISEASE IN HUMAN CORONARIES

A. Tziotziou¹, E. Hartman¹, S.-A. Korteland¹, A. F. van der Steen¹, J. Daemen², J. Wentzel¹, A. C. Akyildiz^1,3

¹Department of Biomedical Engineering, Erasmus Medical Center, Rotterdam, the Netherlands; ²Department of Cardiology, Erasmus Medical Center, Rotterdam, the Netherlands; ³Department of Biomechanical Engineering, Delft University of Technology, Delft, the Netherlands

ELUCIDATING THE LONGITUDINAL IMPACT OF SOLID MECHANICS ON ATHEROSCLEROTIC PLAQUE IN REAL CORONARY ARTERIES

J. L. Warren, C. Meyer, H. Hayenga

The University of Texas at Dallas, United States of America

3D MODELING OF CAROTID ARTERY AND PLAQUE PROGRESSION USING COUPLED AGENT BASED AND FINITE ELEMENT METHODS

S. Tomasevic^1,2, T. Djukic^2,3, B. Arsic^2,4, M. Anic^1,2, A. Blagojevic^1,2, B. Gakovic⁵, I. Koncar⁵, N. Filipovic^1,2

¹Faculty of Engineering, University of Kragujevac, Serbia; ²Bioengineering Research and Development Center (BioIRC), Serbia; ³Institute of Information Technologies, Kragujevac, Serbia; ⁴Faculty of Science, University of Kragujevac, Serbia; ⁵Faculty of Medicine, University of Belgrade, Serbia

MODELING MECHANICS OF 3D PRINTED CERAMIC BONE SUBSTITUTE IMPLANTS TOWARDS PERSONALIZED DEVICES

P. Vena

Politecnico Di Milano, Italy

BI-LAYERED ELECTROSPUN AND MELT ELECTROWRITEN PCL CONSTRUCT AIMING TOWARDS A PROSTHETIC VASCULAR GRAFT

J. Pižorn¹, V. Falk^2,3, S. J. Ferguson¹

¹Institute for Biomechanics, ETH Zurich, Switzerland;; ²Translational Cardiovascular Technologies, ETH Zurich, Switzerland; ³Department of Cardiothoracic and Vascular Surgery, German Heart Center Berlin, Germany

3D PRINTED MICROFIBRE ARCHITECTURES WITH NONLINEAR ELASTIC BEHAVIOUR FOR TUNABLE MYOCARDIAL CONSTRUCTS

G. Cedillo-Servin^1,2, A. Hrynevich^1,2,3, A. Kracher¹, J. van Duijn^1,2,3, J. Malda^1,2,3, M. Castilho^2,4

¹Regenerative Medicine Centre Utrecht, University Medical Center Utrecht, the Netherlands; ²Department of Orthopedics, University Medical Center Utrecht, the Netherlands; ³Department of Equine Sciences, Faculty of Veterinary Medicine, Utrecht University, the Netherlands; ⁴Department of Biomedical Engineering, Technical University of Eindhoven, the Netherlands

CORONARY MICROVASCULAR DISEASE: HOW TO ASSESS THE LOCAL HEMODYNAMIC CHANGES

M. Colombo^1,2, P. Chaudhry¹, Y. Oberholzer¹, A. J. deMello¹

¹Institute for Chemical and Bioengineering, ETH Zurich, Switzerland; ²Department of Mechanical and Production Engineering, Aarhus University, Denmark

RATIONAL DESIGN OF TUBULAR FIBER SCAFFOLDS FOR A SMALL DIAMETER VASCULAR GRAFT

J. Iamsamang¹, I. Donker², J. van Duijn², M. Castilho^1,3

¹Department of Biomedical Engineering, Eindhoven University of Technology, The Netherlands; ²Department of Orthopaedics, University Medical Center Utrecht, The Netherlands; ³Institute for Complex Molecular Systems, Eindhoven University of Technology, The Netherlands

WINDSURFING BIOMECHANICS: FROM A SINGLE GOPRO TO MARKERLESS MOTION TRACKING AND PERFORMANCE ASSESMENT

S. Gavras, A. G. Fischer

Technion - Israel Institute of Technology, Israel

LIFTERS AND JUMPER CONTRIBUTIONS TO RUGBY LIFT PERFORMANCE - A PRELIMINARY STUDY ON ELITE PLAYERS

M. Bourgain^1,2, L. Valdes-Tamayo², M. Guerrero^1,2,3, O. Chaplain⁴, J. Piscione⁴, S. Laporte²

¹EPF Graduate School of Engineering, France; ²Institut de Biomécanique Humaine Georges Charpak, Arts et Métiers Institute of technology, France; ³INSA Toulouse, France; ⁴Fédération Française de Rugby, France

COMPARISON OF FOOT-ANKLE MECHANICS AND MUSCULAR ACTIVATION BETWEEN RUNNING DRILLS AND RUNNING ACROSS DIFFERENT SPEEDS.

G. Abran^1,2, A. Berraz³, F. Delvaux^1,2, J.-L. Croisier^1,2, C. Schwartz²

¹LAM – Motion Lab, Liège, Belgium; ²Department of Movement and rehabilitation sciences, University of Liege, Belgium; ³Université de Technologie de Compiègne (UTC), France.

LOWER LIMB MUSCLE FORCES IN TABLE TENNIS FOOTWORK DURING TOPSPIN FOREHAND BASED ON MUSCULOSKELETAL

Y. He^1,2,3, Z. Gao^1,2,3, G. Fekete³, K. András², D. Mitic⁴, Y. Gu¹

¹Faculty of Engineering, University of Pannonia, Hungary; ²Faculty of Sports Science, Ningbo University, China; ³Savaria Institute of Technology, Eötvös Lorand University, Hungary; ⁴Faculty of Sport and Physical Education, University of Belgrade, Serbia

SONIFICATION ANALYSIS OF MIDFOOT PLANTAR PRESSURE IN PRONATED AND NOT PRONATED RUNNERS

V. Tessutti¹, L. Signorini¹, H. B Soares², M. C. Vidotto¹, A. A. R. Diniz¹, L. C. Yi¹

¹Universidade Federal de São Paulo, Brazil; ²Universidade Federal do Rio Grande do Norte, Brazil

DYNAMIC TENSILE CHARACTERIZATION OF PORCINE BRONCHI

P. Yeswanth, A. Chawla, N. Datla

Indian institute of Technology Delhi, India

MEASUREMENTS OF THE MECHANICAL PROPERTIES OF SKELETAL MUSCLE BY ULTRASONIC ELASTOGRAPHY AND SHEARING TESTS

P. LUBIN, M. ZIDI

Bioengineering, Tissues and Neuroplasticity, UR 7377, University of Paris-Est Créteil, Faculté de Santé, EPISEN, Créteil, France

IN-SITU DETERMINATION OF SPATIAL STRAIN MAPS IN PORCINE GROWTH PLATES BASED ON MRI LOADING EXPERIMENTS

J. Schwer¹, L. Hucke², V. Rasche³, A. Wittek², A. M. Seitz¹

¹Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Ulm, Germany; ²Personalized Biomedical Engineering Lab, Frankfurt University of Applied Sciences, Frankfurt am Main, Germany; ³Experimental Cardiovascular Imaging, Ulm University Medical Centre, Ulm, Germany

EFFECT OF HUMERAL ROTATION ON ROTATOR CUFF STRAIN, LOADING AND KINEMATICS: AN IN-VITRO STUDY

I. Santos¹, L. Pichler¹, C. Thorwächter¹, M. F. Pietschmann^1,2, M. Tauber³, P. E. Müller¹

¹University Hospital LMU Munich, Germany; ²OrthoPraxis Oberhaching, Germany; ³ATOS Clinic Munich, Germany

MULTIDIC AND DUODIC: OPEN-SOURCE SOFTWARE FOR 3D DIGITAL IMAGE CORRELATION AND THEIR APPLICATIONS IN BIOMECHANICS

D. Solav

Technion - Israel Institute of Technology, Israel

IN VITRO CHARACTERIZATION OF LOAD TRANSFER IN CERVICAL DISC REPLACEMENT ARTHROPLASTY

A. Ramos¹, G. Costa², M. Mesnard³

¹University of Aveiro, Portugal; ²University of Aveiro; ³University of Bordeaux

COLLAGEN FIBRIL NANOMECHANICS

O. G. Andriotis

Institute of Lightweight Design and Structural Biomechanics, TU Wien, Austria

TENSILE TESTING OF SINGLE COLLAGEN FIBRILS FROM ACHILLES TENDONS FROM AN OSTEOGENESIS IMPERFECTA MOUSE MODEL

M. Fuchs¹, M. Nalbach¹, M. Rufin¹, O. G. Andriotis¹, L. Battle², A. Docaj², A. Carriero², P. J. Thurner¹

¹TU Wien, Austria; ²The City College of New York, USA

ENZYMATIC DIGESTION OF TENDONOUS COLLAGEN SHOWS HIGH SPECIFICITY AT THE LEVEL OF THE INDIVIDUAL FIBRIL

M. Rufin¹, S. Jaritz², G. J. Schütz², P. J. Thurner¹, O. G. Andriotis¹

¹Institute of Lightweight Design and Structural Biomechanics, TU Wien, Austria; ²Institute of Applied Physics, TU Wien, Austria

REDUCED IN VIVO LOADING LEADS TO LESS REGENERATION AND AN ALTERED COLLAGEN ORGANIZATION DURING HEALING OF RAT ACHILLES TENDONS

I. Silva Barreto¹, M. Pierantoni¹, L. Nielsen², M. Hammerman^1,3, A. Diaz⁴, V. Novak⁴, P. Eliasson^3,5, M. Liebi^2,4, H. Isaksson¹

¹Lund University, Sweden; ²Chalmers University of Technology, Sweden; ³Linköping University, Sweden; ⁴Paul Scherrer Institut, Switzerland; ⁵Sahlgrenska University Hospital, Sweden

DEVELOPMENT AND MECHANICAL EVALUATION OF AN INNOVATIVE DEVICE FOR SOFT TISSUE REPAIR

M. Rodriguez Reinoso¹, V. Burgio¹, V. Tuveri¹, F. Bergamin², C. Surace¹

¹Laboratory of Bioinspired Nanomechanics, DISEG, Politecnico di Torino, Italy; ²Department of Hand, Plastic and Reconstructive Surgery, Ivrea Hospital, Ivrea, Italy

INFLUENCE OF NAOH TREATMENT AND FIBER ORIENTATION ON PCL ELECTROSPUN SCAFFOLD FRICTIONAL PROPERTIES

E. G. Bissacco, M. X. Santschi, S. J. Ferguson

ETHZ, Switzerland

ENGINEERING CURVED MEMBRANES FOR DRUG ABSORPTION TESTS IN THE PRESENCE OF ARTIFICIAL MUCUS

L. Cacopardo, N. Guazzelli, P. Signorello, C. Fasiello, F. Pratesi, A. Corti, A. Ahluwalia

University of Pisa, Italy

3D STRAIN DISTRIBUTION VIA DVC IN ELECTROSPUN HIERARCHICAL SCAFFOLDS FOR TENDON/LIGAMENT REGENERATION

A. Sensini^1,2, A. Zucchelli^1,3, O. Stamati⁴, G. Marchiori⁵, N. Sancisi¹, C. Gotti³, M. Fini⁵, M. L. Focarete⁶, L. Cristofolini¹, G. Tozzi⁷

¹Department of Industrial Engineering, University of Bologna, Italy; ²CTR and cBITE Depertments, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Netherlands, The; ³CIRI-MAM, University of Bologna, Italy; ⁴ESRF The European Synchrotron, France; ⁵IRCCS Rizzoli Orthopaedic Institute, Italy; ⁶Department of Chemistry, University of Bologna, Italy; ⁷School of Engineering, University of Greenwich, United Kingdom

A COMPREHENSIVE STUDY OF THE ACCELERATED AND REAL-TIME DEGRADATION BEHAVIOUR OF BIORESORBABLE BRAIDED STENTS

A. Lucchetti¹, T. Gries¹, T. J. Vaughan²

¹Institut für Textiltechnik of RWTH Aachen University, Germany; ²Biomechanics Research Centre (BMEC), School of Engineering, University of Galway, Ireland

MODULAR CONTROLLER FOR PREDICTIVE SIMULATIONS OF HUMAN STANCE AND GAIT

D. Muñoz, G. Severini

University College Dublin, Ireland

UNRAVELLING ADAPTATION STRATEGIES IN SIT-TO-WALK USING PREDICTIVE NEUROMUSCULAR SIMULATIONS

E. van der Kruk, T. Geijtenbeek

Delft University of Technology, Netherlands, The

EFFECT OF VISION AND SURFACE SLOPE ON POSTURAL SWAY IN HEALTHY ADULTS

M. Aghapour¹, N. Affenzeller¹, C. Peham², C. Lutonsky¹, A. Tichy³, B. Bockstahler¹

¹Section of Physical Therapy, Small Animal Surgery, Department for Companion Animals and Horses, University of Veterinary Medicine, Vienna,; ²Movement Science Group, Equine Surgery, Department for Companion Animals and Horses, University of Veterinary Medicine, Vienna; ³Platform Bioinformatics and Biostatistics, Department for Biomedical Services, University of Veterinary Medicine, Vienna

CAN ALTERED MOTOR CONTROL DECREASE JOINT LOADS IN PEOPLE WITH TYPICAL AND INCREASED ANTEVERSION ANGLES?

H. Kainz¹, W. Koller¹, D. Deimel¹, A. Kranzl², B. Goncalves¹

¹University of Vienna, Department of Biomechanics, Vienna, Austria; ²Orthopedic Hospital Speising, Gait Laboratory, Vienna, Austria

DYNAMIC STABILITY DURING VIRTUAL HEIGHT EXPOSURE IN CHILDREN WITH CEREBRAL PALSY – A CASE-CONTROL PILOT STUDY

R. Lohss^1,2, R. Winter¹, B. Göpfert^1,2, R. Visscher^2,3, R. Brunner^1,2, P. Cattin², C.-C. Hasler¹, E. Viehweger^1,2

¹University Children's Hospital Basel, Switzerland; ²University of Basel, Switzerland; ³ETH Zurich, Switzerland

POPULATION-BASED MODELING INSIGHTS IN JOINT FUNCTION AND LOADING IN KNEE OSTEOARTHRITIS SUBJECTS

I. Jonkers, G. di Raimondo, M. Willems, B. A. Killen

ku leuven, Belgium

EFFECT OF GEOMETRY FEATURES ON KNEE JOINT MECHANICS: SUBJECT-SPECIFIC VS GENERIC MODELS BASED ON 39 PATIENTS

R. Deng¹, O. L. Bruce¹, K. D. Gibbons², C. K. Fitzpatrick², L. P. Li¹

¹University of Calgary, Canada; ²Boise State University, United States

THE EFFECT OF VARIATION IN ANATOMICAL FEATURES ON KNEE JOINT LOADING: A POPULATION-BASED MODELLING APPROACH

M. Willems¹, B. A. Killen¹, G. Di Raimondo¹, C. Van Dijck², S. Havashinezhadian³, K. Turcot³, I. Jonkers¹

¹KU Leuven, Belgium; ²Materialise NV, Belgium; ³Laval University, Canada

OPEN HANDS: AN OPEN SOURCE STATISTICAL FINGER MODEL

T. Munyebvu, C. Metcalf, M. Browne, M. O. Heller, A. Dickinson

University of Southampton, United Kingdom

AUTOMATED SHOULDER MORPHING TO ASSESS SUBJECT SPECIFIC BIOMECHANICS OF ROTATOR CUFF TEAR AND OSTEOARTHRITIS

A. Oswald¹, J. Menze¹, M. Jacxsens², T. Rojas³, M. A. Zumstein^4,5, S. J. Ferguson⁶, K. Gerber¹

¹Universität Bern, Switzerland; ²Cantonal Hospital St. Gallen, Switzerland; ³Clinica Santa Maria, Chile; ⁴Insel University Hospital Bern, Switzerland; ⁵Orthopaedics Sonnenhof, Switzerland; ⁶ETH Zurich, Switzerland

A BIOMECHANICAL MODEL-BASED SYSTEM FOR ASSISTING IN CLINICAL EXAMINATION OF PARKINSON’S DISEASE PATIENTS

D. Lukšys, J. Griškevičius

Vilnius Gediminas Technical University, Lithuania

3D PRINTED KNEE FOR EXPERIMENTAL VALIDATION OF PATELLAR TRACKING AND CONTACT SIMULATION OF DIGITAL TWINS AFTER TKR

F. Michaud, F. Mouzo, U. Lugrís, D. Dopico, J. Cuadrado

University of A Coruña, Spain

A METHODOLOGY TO STUDY THE MECHANICAL PROPERTIES OF NORMAL BREAST TISSUES

A. M. Teixeira¹, A. D. André¹, R. Correia², M. d. L. Barroso³, H. Costa³, P. Martins^1,4

¹FEUP/INEGI/LAETA, Portugal; ²HEMS, i3s, Portugal; ³CHVNGE, Serviço Cirurgia Plástica, Portugal; ⁴i3A, Universidad de Zaragoza, Spain

Acoustic Modal analysis can quantify bone screw stability in an in-vivo animal study

M. Einafshar^1,2, F. Bastami³, A. Kiapour⁴, A. Hashemi²

¹Aalborg University, Denmark; ²Amirkabir University of Technology; ³Shahid Beheshti medical science; ⁴Harvard Medical School

CAI_805_pitch

Y. Cai^1,2, S. Junaid², B. Budair³, G. Pascoletti⁵, E. Zanetti⁵, T. Ringrose¹, P. Zioupos^1,4

¹Cranfield Forensics Istitute, Defence Academy of the United Kingdom, Cranfield University, United Kingdom; ²School of Mechanical, Biomedical and Design Engineering, Aston University, United Kingdom; ³Royal Orthopaedic Hospital, Birmingham, United Kingdom; ⁴Biomedical Engineering, School of Engineering, University of Hull, Kingston upon Hull, United Kingdom; ⁵Department of Engineering, University of Perugia, Italy

CORONARY ARTERY SEGMENTATION IN HYPEREMIA CONDITIONS FOR COMPUTED FFR ANALYSIS

J. Festas^1,2, L. C. Sousa^1,2, C. C. António^1,2, S. Silva³, S. I. Pinto^1,2

¹Engineering Faculty, University of Porto, Porto, Portugal; ²Institute of Science and Innovation in Mechanical and Industrial Engineering (LAETA-INEGI), Portugal; ³Institute of Electronics and Informatics Engineering of Aveiro (IEETA), University of Aveiro, Aveiro, Portugal

DEVELOPMENT OF AN ADVANCED CULTURE SYSTEM TO INVESTIGATE VASCULAR TISSUE ENGINEERING BIOMECHANISMS

E. Pederzani¹, C. E. Campiglio², M. Ripamonti³, A. Rizzo¹, M. Esposito¹, A. Caldiroli⁴, S. A. Riboldi⁴, A. Remuzzi², G. B. Fiore¹, M. Soncini¹

¹Politecnico di Milano, Italy; ²University of Bergamo, Italy; ³Istituto di Ricerche Farmacologiche Mario Negri-IRCCS, Italy; ⁴Dialybrid S.r.l., R&D, Italy

FULLY CRYSTALIZED VERSUS PARTIALLY CRYSTALIZED LITHIUM DISILICATE CAD/CAM BLOCKS

A. Fouda^1,2, M. Özcan³, B. Stawarczyk⁴, C. Bourauel¹

¹University Hospital Bonn, Germany; ²Suez Canal University, Egypt; ³University of Zurich, Switzerland; ⁴University Hospital Munich, Germany

IMPACT OF DETAILED SKELETAL MODELS IN THE EFFICIENCY OF FORWARD DYNAMIC SIMULATION

F. Mouzo, F. Michaud, U. Lugris, J. Cuadrado

University of A Coruña, Spain

ROBUST AND ACCELERATED SUBZONE-BASED NONLINEAR INVERSION IN ELASTOGRAPHY

A. Awasthi¹, P. Mahajan¹, A. Suri², S. Roy¹

¹Department of Applied Mechanics, Indian Institute of Technology Delhi, New Delhi, India; ²Department of Neurosurgery, All India Institute of Medical Sciences, New Delhi, India

SCHLIEREN AND LASER FLOW VISUALIZATION OF FILTRATION AND LEAKAGE OF DIFFERENT FACEMASKS

X. Si

California Baptist University, United States of America

the study of facemasks' efficiency from bacteria filtration

X. Si

California Baptist University, United States of America

Tunable Design and Structure-Property Correlations of Core-Shell Composite Scaffolds obtained by 3D-Printing

C. Pasini, L. Sartore, S. Pandini, G. Ramorino

Department of Mechanical and Industrial Engineering, University of Brescia, Italy

WEB.AM: Wrist Experimental and Biomechanical Analytical Model

I. S. Mat Jais¹, Y. R. Wong², D. A. McGrouther^2,3, H. L. Leo¹

¹National University of Singapore, Singapore; ²Singapore General Hospital, Biomechanics Laboratory, Singapore; ³Singapore General Hospital, Department of Hand and Reconstructive Microsurgery, Singapore

DEEP LEARNING THORACIC AORTA SEGMENTATION FOR FEATURE EXTRACTION AND HEMODYNAMIC ANALYSIS FROM 3D PC-MRI

S. Garzia^1,2, M. A. Scarpolini^1,3, K. Capellini¹, V. Positano¹, F. Cademartiri⁴, S. Celi¹

¹BioCardioLab - Fondazione Toscana Gabriele Monasterio, Italy; ²Department of Information Engineering, University of Pisa, Italy; ³Department of Industrial Engineering, University of Rome "Tor Vergata", Roma, Italy; ⁴Clinical Imaging Department, Fondazione Toscana Gabriele Monasterio, Italy

EXPERMINTAL SELF DISINFECTING ALGINATE MODIFIED USING SILVER NITRATE, CHOLOROHIXIDINE AND GREEN SYNTHESIS

L. Singer^1,2, S. Karacic³, C. Szekat³, G. Bierbaum³, C. Bourauel¹

¹Oral Technology, University Hospital of Bonn, Bonn, Germany; ²Department of Orthodontics, University Hospital Bonn, Bonn, Germany; ³Institute of Medical Microbiology, Immunology and Parasitology, University Hospital Bonn, Bonn, Germany

INNOVATIVE ELECTROSPUN BIOMIMETIC MYOTENDINOUS-INSPIRED JUNCTIONS FOR SOFT ROBOTIC APPLICATIONS

A. Sensini^1,2, R. D'Anniballe³, C. Gotti⁴, L. De Bellis¹, G. Marchiori⁵, M. Fini⁵, R. Carloni³, M. L. Focarete⁶, A. Zucchelli^1,3

¹Department of Industrial Engineering, University of Bologna, Italy; ²CTR and cBITE Departments, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, The Netherlands; ³Bernoulli Institute for Mathematics, Computer Science and Artificial Intelligence, Faculty of Science and Engineering, University of Groningen, The Netherlands; ⁴CIRI-MAM, University of Bologna, Italy; ⁵IRCCS Rizzoli Orthopaedic Institute, Italy; ⁶Department of Chemistry, University of Bologna, Italy

Investigating local tissue deformation using in-vivo 4D synchrotron X-ray µ-CT in bleomycin-induced lung injury in rats

R. T. Deyhle Jr¹, L. Fardin^2,6, I. M. Persson³, J. Cercós⁴, A. Larsson⁴, G. Perchiazzi^4,5, L. E. Olsson¹, S. Bayat^6,7

¹Lund University, Department of Translational Sciences / Medical Radiation Physics, Malmö, Malmö, Sweden; ²European Synchrotron Radiation Facility, ID17 Biomedical Beamline, Grenoble, France; ³Lund University, Faculty of Medicine / Lund Biomedical Imaging Centre, Lund, Sweden; ⁴Uppsala University, Department of Surgical Sciences / Hedenstierna Laboratory, Uppsala, Sweden; ⁵Uppsala University Hospital, Department of Anesthesia / Operation and Intensive Care, Uppsala, Sweden; ⁶University of Grenoble Alpes, Synchrotron Radiation for Biomedicine Laboratory (UA7 STROBE Laboratory ), Grenoble, France; ⁷Grenoble University Hospital, Department of Pulmonology and Physiology, Grenoble, France

VERIFICATION WHETHER THE POROUS STRUCTURE MANUFACTURE WITH AM METHOD CAN BE SUITABLE FOR CELL CULLTURE

S. Sikora, M. Pawlikowski, E. Bednarczyk, R. Grygoruk

Institute of Mechanics and Printing Warsaw University of Technology, Poland

INVESTIGATING THE TOOLPATH DESIGN OF 3D-PRINTED PVA CRYOGELS

L. V. Gale, A. Panieraki, J. P. Crolla, L. E. J. Thomas-Seale

School of Engineering, University of Birmingham, United Kingdom

MECHANICAL BEHAVIOR MODELLING FOR 3D-PRINTED RESORBABLE IMPLANTS OPTIMIZATION AND SOFT TISSUE RECONSTRUCTION

X.-T.K. TRINH¹, P. LECOMTE-GROSBRAS¹, J.-F. WITZ¹, O. MAYEUR¹, F. LESAFFRE¹, J. DESTOUESSE³, M. COSSON², T.-T. DAO¹

¹Univ. Lille, CNRS, Centrale Lille, UMR 9013, LaMcube, F-59000 Lille, France; ²Service de Gynécologie médico-chirurgicale, Hôpital Jeanne de Flandre, CHRU de Lille, France; ³Lattice Medical, Lille, France

DESIGN AND RAPID PROTOTYPING OF A NEW CRANIAL IMPLANT CONCEPT FOR CRANEOPLASTY

L. A. Zambrano Martínez¹, C. Asensio²

¹South East Technological University, Ireland; ²Valencia International University, Spain

NOVEL MULTI-LAYERED 3D BIOPRINTED CONSTRUCT AS ALTERNATIVE VASCULAR CONDUIT REPLACEMENT

F. Potere¹, G. Venturelli¹, B. Belgio¹, G. Guagliano², F. Briatico Vangosa², F. Boschetti¹, P. Petrini², S. Mantero¹

¹Laboratory of Biological Structure Mechanics (LaBS), Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy; ²Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy

FABRICATION OF MULTI-LAYERED BIOMATERIALS FOR VASCULAR APPLICATIONS THROUGH SUB-ZERO BIOPRINTING

A. Panieraki, L. V. Gale, N. Mahmoodi, R. J. Dyson, L. E. J. Thomas-Seale

University of Birmingham, United Kingdom

IDENTIFICATION OF IMMUNOMODULATORY TOPOGRAPHIES TO REGULATE MYOFIBROBLAST DIFFERENTIATION AND INFLUENCE FIBROUS ENCAPSULATION

P. k. Sudarsanam¹, T. Kuijpers¹, R. v. Mechelen², E. Alsema³, J. d. Boer¹, H. Beckers²

¹Eindhoven University of Technology, Department of Biomedical Engineering and Institute for Complex Molecular Systems, Eindhoven, the Netherlands; ²University Eye Clinic Maastricht, School for Mental Health and Neuroscience, Maastricht, the Netherlands; ³3Centre for Health Protection, National Institute for Public Health and the Environment (RIVM), 3721 MA Bilthoven, the Netherlands

CANCER INVASIVENESS IS DETERMINED BY CELL ADAPTABILITY TO CHANGES IN MICROENVIRONMENT MECHANICS

M. Tulchinsky, D. Weihs

Technion-Israel Institute of Technology, Israel

INNOVATIVE ELECTROSPUN BIOMIMETIC MYOTENDINOUS-INSPIRED JUNCTIONS FOR SOFT ROBOTIC APPLICATIONS

A. Sensini^1,2, R. D'Anniballe³, C. Gotti⁴, L. De Bellis¹, G. Marchiori⁵, M. Fini⁵, R. Carloni³, M. L. Focarete⁶, A. Zucchelli^1,4

¹Department of Industrial Engineering, University of Bologna, Italy; ²CTR and cBITE Departments, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Netherlands, The; ³Bernoulli Institute for Mathematics, Computer Science and Artificial Intelligence, Faculty of Science and Engineering, University of Groningen, The Netherlands; ⁴CIRI-MAM, University of Bologna, Italy; ⁵IRCCS Rizzoli Orthopaedic Institute, Italy; ⁶Department of Chemistry, University of Bologna, Italy

EXPERMINTAL SELF DISINFECTING ALGINATE MODIFIED USING SILVER NITRATE, CHOLOROHIXIDINE AND GREEN SYNTHESIS

L. Singer¹, S. Karacic², C. Szekat², G. Bierbaum², C. Bourauel¹

¹Oral Technology, University Hospital Bonn, Germany; ²Institute of Medical Microbiology, Immunology and Parasitology, University Hospital Bonn, Germany

EFFECT OF BRUSHING ON THE SURFACE MICRO ROUGHNESS OF DIFFERENT TYPES OF CAD/CAM CERAMICS

R. D. Vasiliu¹, S. D. Porojan², L. Porojan¹

¹1Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, “Victor Babeș” University of Medicine and Pharmacy Timișoara, Eftimie Murgu Sq. No. 2, 300041; ²Department of Oral Rehabilitation (Dental Technique), Center for Advanced Technologies in Dental Prosthodontics,Faculty of Dental Medicine, “Victor Babeș” University of Medicine and Pharmacy Timișoara, Eftimie Murgu Sq. No. 2, 300041 Timișoara, Romania

CHARACTERIZATION OF HYDRATION EFFECT ON HAEMOSTATIC SPONGE STRUCTURE USING MULTIMODAL IMAGING

A. Baldit¹, C. Po², C. Laurent¹, H. Kerdjoudj³, O. Perroud¹, J. Schiffler², N. Bahlouli², C. Mauprivez³

¹LEM3-UMR-7239, CNRS, University of Lorraine, France; ²Laboratoire ICube, CNRS UMR 7357, Strasbourg, France; ³BIOS, Univ. de Reims Champagne Ardenne,EA 4691 Reims, France.

EFFECT OF DENTURE CLEANERS ON SURFACE MICROROUGHNESS AND HARDNESS OF COBALT-CHROMIUM ALLOYS

L. Porojan, R. D. Vasiliu, S. D. Porojan, F. R. Toma

“Victor Babeș” University of Medicine and Pharmacy, Romania

EFFECT OF POLYMER CONCENTRATION ON MORPHOLOGY AND FUNCTION OF CHITOSAN AS DRUG-RELEASING SCAFFOLDS

E. Dathathri¹, G. Thakur¹, K. Koteshwara²

¹Department of Biomedical Engineering, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India; ²Manipal College of Pharmaceutical Sciences, Manipal Academy of higher Education, Manipal, India

A BIOMECHANICAL MODEL-BASED SYSTEM FOR ASSISTING IN CLINICAL EXAMINATION OF PARKINSON’S DISEASE PATIENTS

D. Lukšys, J. Griškevičius

Vilnius Gediminas Technical University, Lithuania

ASSESSMENT OF KNEE PROPRIOCEPTION IN PATIENTS AFTER ACL RECONSTRUCTION OR ACL REPAIR

P. Zalewska¹, T. Guszczyn², S. Piszczatowski¹

¹Bialystok University of Technology, Poland; ²The Medical University of Bialystok Children’s Clinical Hospital, Poland

INTEGRATED ASSESSMENT OF GLENOHUMERAL JOINT FUNCTION DURING DYNAMIC TASKS: A PRELIMINARY STUDY

E. Scalona, M. Mosso, G. Rossetto, M. F. Saccomanno, G. Milano, N. F. Lopomo

University of Brescia, Italy

EFFECT OF SENSORY INTERACTION ON BALANCE CONTROL ABILITY OF FREESTYLE SKI AERIALS ATHLETES AND HEALTHY INDIVIDUALS

Y. Cheng¹, X. Wang², T. Zhao³, L. Cao², Y. Gao²

¹Shanghai University of Sport, Shanghai, China; ²Shenyang Sport university, Shenyang，China; ³Northeastern University, Shenyang, China

IMPACT OF DETAILED SKELETAL MODELS IN THE EFFICIENCY OF FORWARD DYNAMIC SIMULATION

F. Mouzo, F. Michaud, U. Lugris, J. Cuadrado

University of A Coruña, Spain

MISSING MUSCLE EXCITATIONS PREDICTION DURING WALKING THROUGH A MUSCLE-SYNERGIES BASED CALIBRATION METHOD

M. Romanato¹, F. Spolaor¹, Z. Sawacha^1,2

¹University of Padova, Department of Information Engineering, Italy; ²University of Padova, Department of Medicine, Italy

PERFORMANCE OF TWO POSE ESTIMATION ALGORITHMS IN GAIT ANALYSIS AGAINST THE VICON REFERENCE SYSTEM

A. A. Hulleck¹, M. Mohseni², M. K. Abu Hantash¹, R. Katmah¹, M. Almadani¹, N. Arjmand², K. Khalaf¹, M. El Rich¹

¹Khalifa University, United Arab Emirates; ²Sharif University of Technology, Iran

MECHANICAL MODEL OF HUMAN STABILITY ON EXTERNAL FORCE-CAUSED FALL

M. Sopa, G. Sypniewska-Kamińska, T. Walczak, H. Kamiński

Poznan University of Technology, Poland

THREE-DIMENSIONAL OSTEOCYTE LACUNO-CANALICULAR NETWORK AT THE BONE IMPLANT INTERFACE

K. Abouzaid¹, T. Reiss², H. Albini-Lomami¹, G. Haïat¹, E. Vennat², S. Le Cann¹

¹CNRS, MSME UMR 8208, France; ²Université Paris-Saclay, CentraleSupélec, ENS Paris-Saclay, CNRS, LMPS, France

A CONTRAST-ENHANCED X-RAY IMAGING APPROACH FOR CHARACTERIZING ARTICULAR CARTILAGE

S. Fantoni¹, M. Berni², M. Assenza², P. Cardarelli³, A. Taibi⁴, C. Trapella⁵, V. Cristofori⁵, F. Baruffaldi², N. F. Lopomo⁶, M. Baleani²

¹Department of Industrial Engineering, University of Bologna, Italy; ²Medical Technology Laboratory, IRCCS Istituto Ortopedico Rizzoli, Italy; ³Istituto Nazionale di Fisica Nucleare (INFN), Division of Ferrara, Italy; ⁴Department of Physics and Earth Sciences, University of Ferrara, Italy; ⁵Department of Chemical, Pharmaceutical and Agricultural Sciences, University of Ferrara, Italy; ⁶Department of Information Engineering, University of Brescia, Italy

4D CT AS A TOOL TO MEASURE SCAPHOLUNATE DISTANCE: AN INTRA-AND INTEROBSERVER EVALUATION

S. Goeminne¹, E. Salaets¹, W. Coudyzer¹, D. Shah², I. Degreef¹, L. Scheys¹

¹KULeuven, Belgium; ²ITT, India

MUSCLE DIFFUSION TENSOR IMAGING: INFLUENCE OF SEGMENTATION ON THE DETERMINATION OF MUSCLE ARCHITECTURE

S. Vetter¹, H.-P. Köhler¹, M. Witt¹, J. Henkelmann², C. Roth²

¹Leipzig University, Germany; ²Universitätsklinikum Leipzig, Germany

NEURAL RADIANCE FIELDS FOR VESSEL RECONSTRUCTION FROM 2D X-RAY CORONARY ANGIOGRAPHY PROJECTIONS – PROOF OF CONCEPT

A. J. E. Vermeer^1,2, K. W. H. Maas³, P.-J.J. Vlaar², F. N. Vosse¹, M. van 't Veer^1,2

¹Department of Biomedical Engineering, Eindhoven University of Technology; ²Department of Cardiology, Catharina Hospital Eindhoven; ³Department of Mathematics and Computer Science, Eindhoven University of Technology

CORONARY ARTERY SEGMENTATION IN HYPEREMIA CONDITIONS FOR COMPUTED FFR ANALYSIS

J. Festas^1,2, L. C. Sousa^1,2, C. C. António^1,2, S. Silva³, S. I. Pinto^1,2

¹Engineering Faculty, University of Porto, Porto, Portugal; ²Institute of Science and Innovation in Mechanical and Industrial Engineering (LAETA-INEGI), Porto, Portugal; ³Institute of Electronics and Informatics Engineering of Aveiro (IEETA), University of Aveiro, Aveiro, Portugal

DEEP LEARNING THORACIC AORTA SEGMENTATION FOR FEATURE EXTRACTION AND HEMODYNAMIC ANALYSIS FROM 3D PC-MRI

S. Garzia^1,2, M. A. Scarpolini^1,3, K. Capellini¹, V. Positano¹, F. Cademartiri⁴, S. Celi¹

¹BioCardioLab - Fondazione Toscana Gabriele Monasterio, Italy; ²Department of Information Engineering, University of Pisa, Italy; ³Department of Industrial Engineering, University of Rome "Tor Vergata", Roma, Italy; ⁴Clinical Imaging Department, Fondazione Toscana Gabriele Monasterio, Italy

AORTIC LOCAL BIOMECHANICAL PROPERTIES IN THE CASE OF ASCENDING AORTIC ANEURYSMS

S. LIN¹, M. C. Morgant², D. M. Marín-Castrillón¹, P. M. Walker^1,2, L. S. Aho Glélé², B. Presles¹, O. Bouchot^1,2, A. Lalande^1,2

¹ICMUB, University of Burgundy, Dijon, France; ²University Hospital of Dijon, Dijon, France

CFD AND CSM MODELS OF THE ASCENDING THORACIC AORTA ANEURYSM WITH PATIENT SPECIFIC WALL DISPLACEMENT

R. B. Valente¹, A. Mourato¹, M. Brito^1,2, J. Xavier^1,2, S. Avril³, A. Tomás⁴, J. Fragata^4,5

¹UNIDEMI, Department of Mechanical and Industrial Engineering, NOVA School of Science and Technology, NOVA University Lisbon, Portugal; ²LASI, Intelligent Systems Associate Laboratory, Portugal; ³Mines Saint-Etienne, University of Lyon, Inserm, Sainbiose U1059, France; ⁴Santa Marta Hospital, Department of Cardiothoracic Surgery, Portugal; ⁵Department of Surgery and Human Morphology, NOVA Medical School, Portugal

MODELING OF FLUID SHEAR STRESS ON SMOOTH MUSCLE CELLS IN COMMON CAROTID ARTERY MEDIA

S. Altundemir¹, K. Pekkan², A. K. Uguz¹

¹Bogazici University, Turkiye; ²Koc University, Turkiye

A COMPUTATIONAL FRAMEWORK FOR MODELLING PATCH-AUGMENTED AORTIC ARCH RECONSTRUCTION

R. Padmos, L. Noël, M. Peirlinck

Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, the Netherlands

FABRICATION OF A PATIENT-SPECIFIC COMPLIANT AND TRANSPARENT PHANTOM FOR IN-VITRO AORTIC DISSECTION HAEMODYNAMICS

Q. Li^1,2, D. Nikitichev^1,2, J. Yu^1,2, V. Diaz-Zuccarini^1,2, S. Balabani^1,2

¹Wellcome/EPSRC Centre for Interventional and Surgical Sciences, University College London, UK; ²Department of Mechanical Engineering, University College London, UK

IN-VITRO HAEMODYNAMICS IN A PATIENT-SPECIFIC COMPLIANT DISSECTED AORTA

Q. Li^1,2, V. Diaz-Zuccarini^1,2, S. Balabani^1,2

¹Wellcome/EPSRC Centre for Interventional and Surgical Sciences, University College London, UK; ²Department of Mechanical Engineering, University College London, UK

VORTICITY TRANSPORT-BASED ANALYSIS OF THE ABDOMINAL AORTIC ANEURISM HEMODYNAMICS

V. Mazzi¹, K. Calò¹, M. Lodi Rizzini¹, L. Saccaro^2,3, D. Gallo¹, A. Iollo^2,3, U. Morbiducci¹

¹PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Italy; ²IMB, UMR 5251, Université de Bordeaux, Talence, France; ³Inria - Bordeaux Sud-Ouest, Talence, France

ON MODELLING THE MULTILAYER RESPONSE OF AORTA USING LAYER-SPECIFIC EXPERIMENTAL DATA

J. A. Peña^1,2, M. A. Martínez^2,3, E. Peña^2,3

¹Department of Management and Manufacturing Engineering. University of Zaragoza, Spain; ²Aragón Institute of Engineering Research (I3A), University of Zaragoza; ³Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine, Spain

IMAGE-BASED IN VIVO ESTIMATION OF REGIONAL STRAIN AND STIFFNESS PROPERTIES OF THE WHOLE AORTIC VESSEL

E. Vignali¹, E. Gasparotti¹, F. Dell'Agnello^1,2, K. Capellini¹, M. A. Scarpolini^1,3, F. Cademartiri⁴, S. Celi¹

¹BioCardioLab, Fondazione Toscana Gabriele Monasterio, Italy; ²Department of Information Engineering, University of Pisa, Italy; ³Department of Industrial Engineering, University of Rome "Tor Vergata", Italy; ⁴Clinical Imaging Department, Fondazione Toscana Gabriele Monasterio, Italy

PRIMARY FIXATION OF DENTAL IMPLANTS IN BONE SURROGATE - FINITE ELEMENT ANALYSIS CONSIDERING INSERTION DAMAGE

B. Yang¹, A. Irastorza-Landa², P. Heuberger², H.-L. Ploeg¹

¹Queen's University, Canada; ²Nobel Biocare Service AG, Switzerland

ACCURACY OF CAD-BASED AND CT-BASED FE MODELLING TO PREDICT THE FATIGUE BEHAVIOR OF POROUS TITANIUM DENTAL IMPLANTS

A. Vautrin¹, J. Aw², E. Attenborough², P. Varga¹

¹AO Research Institute Davos, Switzerland; ²Attenborough Dental, United Kingdom

THE EFFECT OF ALVEOLAR BONE CREST SHAPE ON STRAIN DISTRIBUTION IN PERI-IMPLANT BONE TISSUE

B. Thomková¹, T. Zikmund², J. Kaiser², M. Joukal³, P. Marcián¹

¹Faculty of Mechanical Engineering, Brno University of Technology, Czech Republic; ²CEITEC – Central European Institute of Technology, Brno University of Technology, Czech Republic; ³Department of Anatomy, Faculty of Medicine, Masaryk University, Czech Republic

FULLY CRYSTALIZED VERSUS PARTIALLY CRYSTALIZED LITHIUM DISILICATE CAD/CAM BLOCKS

A. Fouda^1,2, M. Özcan³, B. Stawarczyk⁴, C. Bourauel¹

¹University Hospital Bonn, Germany; ²Suez Canal University, Egypt; ³University of Zurich, Switzerland; ⁴University Hospital Munich, Germany

MANDIBULAR MORPHOMETRY AND TMJ ANKYLOSIS: FROM THE PERSPECTIVE OF INDIAN POPULATION

G. CHANDRA¹, R. GHOSH¹, G. KHANDELWAL², A. ROYCHOUDHURY², S. MUKHERJEE¹, A. CHAWLA¹, K. MUKHERJEE¹

¹Indian Institute of Technology Delhi, India; ²All Indian Institute of Medical Sciences, New Delhi, India

SCHLIEREN AND LASER FLOW VISUALIZATION OF FILTRATION AND LEAKAGE OF DIFFERENT FACEMASKS

J. Xi¹, D. Carmona², J. Samonte², D. Mejia², X. Si², J. Xi³, D. T. L. Liu²

¹University of California at Santa Cruz; ²California Baptist University, United States of America; ³University of Massachusetts at Lowell

ULTRA-HIGH SPEED IMAGING FOR STUDYING ULTRASONIC CUTTING OF BONE & CARTILAGE

A. Marek¹, N. Alnamnam², X. Li³, A. Luczak², I. Yang², M. Lucas³, H. Simpson^2,4, F. Pierron¹

¹University of Southampton, United Kingdom; ²University of Edinburgh, United Kingdom; ³University of Glasgow, United Kingdom; ⁴Royal Infirmary of Edinburgh, United Kingdom

THE FIBRILLAR MECHANICS AND STRUCTURE OF FIBROTIC TISSUE ILLUMINATED WITH IN SITU SYNCHROTRON X-RAY NANOMECHANICAL IMAGING

Y. Zhang¹, D. Hollis², R. Ross³, T. Snow⁴, N. J Terrill⁴, Y. Lu⁵, W. Wang¹, J. Connelly³, G. Tozzi⁶, H. S Gupta¹

¹School of Engineering and Materials Science, Queen Mary University of London, London, UK; ²LaVision UK, Bicester, UK; ³Centre for Cell Biology and Cutaneous Research, Blizard Institute, Barts and the London School of Medicine and Dentistry, Queen Mary University of London, London, UK; ⁴Diamond Light Source, Harwell Science and Innovation Campus, Didcot, UK; ⁵Centre for Biomarkers and Biotherapeutics, Barts Cancer Institute, John Vane Science Centre,Queen Mary University of London,London, UK; ⁶Faculty of Engineering & Science, School of Engineering, University of Greenwich, Chatham Maritime, UK

CAN IN VITRO KNEE SIMULATORS REPLICATE KNEE BIOMECHANICS: A SYSTEMATIC REVIEW

R. Y. Rao¹, O. Taylan², L. Schey², D. Shah¹

¹Indian Institute of Technology, Bombay, India; ²Institute for Orthopaedic Research and Training (IORT), KU Leuven, Belgium

COUPLING EXPERIMENTAL & SIMULATION WORKFLOW OF TREATED HUMAN TIBIA CONCERNING INTERFRAGMENTARY MOVEMENT

K. Wickert¹, A. Andres¹, M. Roland¹, M. Orth², T. Pohlemann², S. Diebels¹

¹Saarland University - Applied Mechanics, Germany; ²Saarland University Hospital - Clinic for Trauma, Hand and Reconstructive Surgery, Germany

A NOVEL APPROACH TO MEASURE TIBIOFEMORAL KINEMATICS IN HUMAN CADAVERIC KNEES WITH INTACT CAPSULE

S. A. Brendle^1,2, S. Krüger¹, T. M. Grupp^1,2

¹Research and Development, Aesculap AG, Tuttlingen, Germany; ²Department of Orthopaedic and Trauma Surgery, Musculoskeletal University Center Munich (MUM), Campus Grosshadern, LMU Munich, Munich, Germany

DESIGN OF A REVERSE SHOULDER IMPLANT TO MEASURE SHOULDER STIFFNESS DURING IMPLANT COMPONENT POSITIONING

N. Förstl¹, F. Süß¹, C. Englert², S. Dendorfer¹

¹OTH Regensburg, Germany; ²Hospital zum Heiligen Geist Fritzlar, Germany

BIOMECHANICAL INVESTIGATION OF BONE SCREW FIXATION USING ACOUSTIC MODAL ANALYSIS VERSUS CONVENTIONAL PULLOUT TEST; AN ANIMAL STUDY

M. Einafshar¹, F. Bastami², A. Kiapour³, A. Hashemi⁴

¹Aalborg University, Denmark; ²Shahid Beheshti of Medical science University, Iran; ³Harvard Medical School, USA; ⁴Amirkabir University of Technology, Iran

METAPHYSEAL VOIDS IN PLATED PROXIMAL HUMERUS FRACTURES TREATED WITH A NOVEL TECHNIQUE – A BIOMECHANICAL STUDY

I. Zderic¹, D. Zhelev^1,2, S. Hristov², A. Baltov³, S. Ribagin⁴, G. Richards¹, P. Varga¹, B. Gueorguiev¹

¹AO Research Institute Davos, Switzerland; ²University Multiprofile Hospital for Active Treatment, Bulgaria; ³University Multiprofile Hospital for Active Treatment and Emergency Medicine 'N. I. Pirogov', Bulgaria; ⁴University 'Prof. Dr. Asen Zlatarov', Bulgaria

DIMENSION MEASUREMENTS FROM PICTURES OF TENSILE TEST SAMPLES: GUIDELINES TO IMPROVE REPRODUCIBILITY

Y. Lafon¹, F. Bermond¹, F. Chassagne², B. Pierrat², K. Bruyère¹

¹Univ Lyon, Univ Gustave Eiffel, Univ Claude Bernard Lyon 1, LBMC UMR T_ 9406, F-69622 Lyon, France; ²Mines Saint-Étienne, Univ Jean Monnet, INSERM, U 1059 Sainbiose, 42023, Saint-Étienne, France

FORCES AND TEMPERATURE MEASUREMENT DURING TEMPORAL BONE MILLING

M. Boillat¹, A.-S. Bonnet¹, C. Parietti^2,3

¹Université de Lorraine,CNRS, Arts et Métiers ParisTech, LEM3, F-57000 Metz, France; ²ENT Department, University Hospital of Nancy, Nancy, France; ³Université de Lorraine, Ecole de Chirurgie Nancy-Lorraine, Faculté de Médne de Nancy,54500 Vandœuvre-lès-Nancy, Franceeci

3D PRINTED KNEE FOR EXPERIMENTAL VALIDATION OF PATELLAR TRACKING AND CONTACT SIMULATION OF DIGITAL TWINS ATFER TKR

F. Michaud, F. Mouzo, U. Lugrís, D. Dopico, J. Cuadrado

University of A Coruña, Spain

DEVELOPMENT OF SCALABLE FINITE ELEMENT MODELS BASED ON KNEE LAXITY TESTS ON CADAVERS

L. Kiener¹, A. Gomez¹, G. Tschupp², M. Nusser¹

¹ZHAW, Switzerland; ²Mathys AG, Switzerland

OPTICAL COHERENCE TOMOGRAPHY BASED MICROELASTOGRAPHY FOR BIOMECHANICAL ASSESSMENT OF NATURAL AND ARTIFICIAL CARTILAGE

M. Vovchenko^1,2, M. Gielen², Z. De Vrij¹, R. Castro Viñuelas^3,4, S. A. Elahi^1,3, I. Jonkers³, H. Van Oosterwyck^1,5, C. Glorieux²

¹Biomechanics Section, Dept. of Mechanical Engineering, KU Leuven, Belgium; ²Laboratory for Soft Matter and Biophysics, Dept. of Physics and Astronomy, KU Leuven, Belgium; ³Human Movement Biomechanics Research Group, Dept. of Movement Sciences, KU Leuven, Belgium; ⁴Laboratory for Tissue Homeostasis and Disease, Dept. of Development and Regeneration, Skeletal Biology and Engineering Research Center, KU Leuven, Belgium; ⁵Prometheus Division of Skeletal Tissue Engineering, KU Leuven, Belgium

PARAMETRISATION OF THE CALCANEUS AND MEDIAL CUNEIFORM

Y. Cai^1,2, S. Junaid², B. Budair³, G. Pascoletti⁵, E. Zanetti⁵, T. Ringrose¹, P. Zioupos⁴

¹Cranfield Forensics Institute, Defence Academy of the UK, Cranfield University, United Kingdom; ²School of Mechanical, Biomedical and Design Engineering, Aston University, United Kingdom; ³Royal Orthopaedic Hospital (ROH) Birmingham, United Kingdom; ⁴Biomedical Engineering, School of Engineering, University of Hull, Kingston upon Hull, United Kingdom; ⁵Department of Engineering, University of Perugia, Italy

EFFECT OF COMBINING MUSCLE SUB-GROUPS IN THE MANDIBLE DURING MASTICATION: A FINITE ELEMENT STUDY

S. Sagar, R. Ghyar, B. Ravi, D. Shah

Indian Institute of Technology Bombay, India

VALIDATION OF A DATA GLOVE CALIBRATION PROTOCOL IN HAND OSTEOARTHRITIS PATIENTS

A. Roda-Sales, V. Gracia-Ibáñez, N. J. Jarque-Bou, J. L. Sancho-Bru, M. Vergara, V. Bayarri-Porcar

Departamento de Ingeniería Mecánica y Construcción, Universitat Jaume I, Spain

WEB.AM: WRIST EXPERIMENTAL AND BIOMECHANICAL ANALYTICAL MODEL

I. S. Mat Jais¹, Y. R. Wong², D. A. McGrouther^2,3, H. L. Leo¹

¹National University of Singapore, Department of Biomedical Engineering, Singapore; ²Singapore General Hospital, Biomechanics Laboratory, Singapore; ³Singapore General Hospital, Department of Hand and Reconstructive Microsurgery, Singapore

BIOMECHANICAL COMPARISON OF THREE DIFFERENT RECONSTRUCTIVE TECHNIQUES FOR SCAPHOLUNATE DISSOCIATION

I.-J. Park¹, T. S. Bae², D.-S. Kwak¹

¹The Catholic University of Korea, South Korea; ²Jungwon University, South Korea

VALIDATION OF A MUSCULOSKELTAL HUMAN SHOULDER MODEL DURING A FORWARD FLEXION MOTION

M. C. Labrune¹, S. H. Nasab Hosseini², D. T. Axford^1,3, R. Potra¹, J. Cadman¹, D. Dabirrahmani¹, W. R. Taylor², L. M. Ferreira^1,3, S. Raniga¹, R. Appleyard¹

¹Faculty of Medicine, Health and Human Sciences, Macquarie University, Australia; ²Institute for Biomechanics, ETH Zürich, Switzerland; ³Dept of Mechanical and Materials Engineering, Western University, Canada

CORNEAL MECHANICS FOR THE EARLY DETECTION OF THE KERATOCONUS

C. Giraudet^1,2, J. Diaz², P. Le Tallec^1,2, J.-M. Allain^1,2

¹LMS,Ecole Polytechnique, France; ²Inria, France

ANALYSIS OF BIOMECHANICAL RESPONSE AFTER CORNEAL CROSSLINKING WITH DIFFERENT FLUENCE LEVELS

I. Fischinger^1,2,3, S. A. Reifeltshammer^2,3, T. G. Seiler^4,5,6, M. H. Nambiar^7,8, P. Büchler⁷, J. Wendelstein^2,3,5, M. Bolz^2,3

¹Augentagesklinik Spreebogen, Berlin, Germany; ²Klinik für Augenheilkunde, Kepler Universitätsklinikum, Linz, Austria; ³Johannes Kepler Universität Linz, Medizinische Fakultät, Linz, Austria; ⁴Klinik für Augenheilkunde, Universitätsklinkum Düsseldorf, Germany; ⁵Institut für Refraktive und Ophthalmo-Chirurgie (IROC), Zürich, Switzerland; ⁶Department of Ophthalmology, Inselspital Bern, University of Bern, Switzerland; ⁷ARTORG Center for Biomedical Engineering Research, University of Bern, Bern, Switzerland; ⁸Graduate School for Cellular and Biomedical Sciences, University of Bern, Switzerland

IMAGING LOCAL TISSUE STRAIN USING IN VIVO 4D SYNCHROTRON X-RAY µCT IN BLEOMYCIN-INDUCED LUNG INJURY IN RATS

R. T. Deyhle^1,2, L. Fardin³, I. Mahmutovic Persson^1,2, J. L. Cercos-Pita⁴, G. Perchiazzi⁴, L. E. Olsson^1,2, S. Bayat⁴

¹Lund University; ²Skåne University Hospital; ³Univ. Grenoble Alpes, France; ⁴Uppsala University

TOMOGRAPHY IMAGING AND DIGITAL VOLUME CORRELATION OF THE LUNG DURING MECHANICAL VENTILATION

H. Arora¹, D. Kernot¹, J. Carson¹, J. Britton¹, R. van Loon¹, G. Tanaka², T. Sera³

¹Swansea University, UK; ²Chiba University, Japan; ³Kyushu University, Japan

AN APPLICATION FOR REMOTE RESPIRATORY PATTERNS DETECTION IN POST-SURGERY PATIENTS

E. Vignali¹, L. Miglior², E. Gasparotti¹, A. Ceni², C. Zirafa³, D. Haxhiademi⁴, L. Frediani⁵, F. Melfi³, S. Berti⁶, V. Gervasi², S. Celi¹

¹BioCardioLab, Fondazione Toscana Gabriele Monasterio, Italy; ²Department of Informatics, University of Pisa, Italy; ³Minimally Invasive and Robotic Thoracic Surgery Department, University of Pisa, Italy; ⁴Intensive Care Unit, Fondazione Toscana Gabriele Monasterio, Italy; ⁵Department of Cardiology, Pimobino-Elba Hospital, Italy; ⁶Department of Cardiology, Fondazione Toscana Gabriele Monasterio, Italy

BREATHING AS A MEDIATOR BETWEEN POSTURAL STABILITY AND STRESS IN STUDENTS

S. Tassani¹, P. Chaves¹, J. Mendoza², J. Ramirez³, M. Beardsley¹, D. Hernandez-Leo¹, M. Portero-Tresserra⁴, M. A. Gonzalez-Ballester⁵, J. Noailly¹

¹Universitat Pompeu Fabra, Barcelona, Spain; ²Universidad Iberoamericana, Mexico City, Mexico; ³Universidad Nacional de Colombia, Medellín, Colombia; ⁴Universitat Autònoma de Barcelona; ⁵ICREA, Barcelona, Spain

FACEMASKS’ PROTECTION EFFICIENCY IN ATTENUATED E. COLI BACTERIA FILTRATION

X. Si¹, D. Szeto¹, J. Samonte¹, D. Carmona¹, D. Mejia¹, J. Xi²

¹California Baptist University; ²University of Massachusetts

SKIN-TO-BONE INTERACTION: MECHANICAL CHARACTERIZATION BY PEELING TESTS ON PIG SCALPS

Y. Vallet¹, A. Baldit¹, C. Bertholdt^2,3, R. Rahouadj¹, O. Morel^2,3, C. Laurent¹

¹LEM3 CNRS UMR 7239, France; ²Université de Lorraine, CHRU-NANCY, Pôle de la femme, F-54000 Nancy, France; ³IADI INSERM U1254, Rue du Morvan, 54500, Vandoeuvre-lès-nancy, France

IDENTIFICATION OF TRANSVERSLY ISOTROPIC CONSTITUITIVE PARAMETERS USING IN-VIVO MACRO-INDENTATION METHODS

A. Ashkenazi, Z. Oddes, D. Solav

Technion - Israel Institute of Technology, Israel

MECHANICAL PROPERTIES OF THE BICEPS BRACHII ALONG ITS PROXIMO-DISTAL LOCATION

C. Simon, M. Zidi

Université Paris-Est Créteil, France

DETERMINATION OF THE STRAIN BEHAVIOR OF AXIALLY LOADED COLLATERAL LIGAMENTS OF THE KNEE JOINT - A COMPARISON OF DIGITAL IMAGE CORRELATION AND STRAIN GAUGES.

G. Prusa, L. Bauer, I. Santos, C. Thorwächter, M. Woiczinski, M. Kistler

University Hospital, LMU Munich, Germany

HYALURONIC ACID HAS NO TRIBOLOGICAL EFFECT ON DEGENERATED KNEE JOINT TISSUES - AN IN-VITRO STUDY

L. de Roy, M. Sukopp, J. Schwer, G. Teixeira, A. Ignatius, A. M. Seitz

Institute of Orthopaedic Research and Biomechanics, University Ulm, Germany

A DATA-DRIVEN CONSTITUTIVE FRAMEWORK FOR SOFT BIOLOGICAL TISSUES

O. Z. Tikenoğulları^1,2, A. K. Açan², E. Kuhl¹, H. Dal²

¹Stanford University, United States of America; ²Middle East Technical University, Turkiye

A NEW HYPERELASTIC MODEL FOR HUMAN MYOCARDIUM

J. Vaverka, A. Hrubanová, J. Burša

Brno University of Technology, Faculty of mechanical engineering, Czech Republic

MECHANICAL PROPERTIES OF DIFFERENT TISSUES OF CAROTID ATHEROMA: EXPERIMENTAL APPROACH

A. Hrubanová¹, Z. Bednařík², L. Kubíček³, J. Burša¹

¹Brno University of Technology, Faculty of mechanical engineering, Czech Republic; ²First Department of Pathology, St. Anne’s University Hospital, Brno, Czech Republic; ³Second Department of Surgery, St. Anne’s University Hospital, Brno, Czech Republic

A METHODOLOGY TO STUDY THE MECHANICAL PROPERTIES OF NORMAL BREAST TISSUES

A. M. Teixeira¹, A. D. André¹, R. Correia², M. d. L. Barroso³, H. Costa³, P. Martins^1,4

¹FEUP/INEGI/LAETA, Portugal; ²HEMS, i3s, Portugal; ³CHVNGE, Serviço Cirurgia Plástica, Portugal; ⁴i3A, Universidad de Zaragoza, Spain

INVESTIGATING THE EFFECT OF REDUCED LOAD ON RAT ACHILLES TENDONS VISCOELASTIC PROPERTIES: A FINITE ELEMENT STUDY

R. Axelsson, G. A. Orozco, A. Gustafsson, H. Isaksson

Lund University, Sweden

ROBUST AND ACCELERATED SUBZONE-BASED NONLINEAR INVERSION IN ELASTOGRAPHY

A. Awasthi¹, P. Mahajan¹, A. Suri², S. Roy¹

¹Department of Applied Mechanics, Indian Institute of Technology Delhi, New Delhi, India; ²Department of Neurosurgery, All India Institute of Medical Sciences, New Delhi, India

DEVELOPMENT OF A MICRO TOMOGRAPHY PROTOCOL FOR PTA-CONTRASTED HUMAN MENISCUS

G. Marchiori^1,2, M. Berni^1,2, C. Falsina¹, N. F. Lopomo¹, G. Giavaresi², A. Grassi², G. Dal Fabbro², S. Zaffagnini², M. Maglio²

¹Università degli Studi di Brescia, Italy; ²Istituto Ortopedico Rizzoli, Italy

A KINEMATIC AND KINETIC COMPARISON OF THE COUNTER MOVEMENT JUMJ AND STOP JUMP RECEPTIONS

C. Schwartz¹, J. Paulus¹, J.-F. Kaux²

¹LAM - Motion Lab, University of Liège, Belgium; ²Physical Medicine and Sport Traumatology Department, University and University Hospital of Liège, Belgium

EFFECT OF PEDALLING WORKLOAD ON KNEE JOINT FORCES

E. Martín-Sosa¹, E. Soler-Vizán², J. Mayo¹, J. Ojeda¹

¹Departamento de Ingeniería Mecánica y Fabricación. Universidad de Sevilla, Spain; ²Departamento de Medicina Física y Rehabilitación, Hospital Universitario Virgen de Valme. Sevilla

THE EFFECTS OF RUNNING SHOES ON GROUND REACTION FORCE IN MALE RECREATIONAL RUNNERS

X. Jiang^1,2,3, D. Xu^2,4, I. Bíró^1,3, Y. Gu²

¹Óbuda University, Hungary; ²Ningbo University, China; ³Szeged University, Hungary; ⁴University of Pannonia, Hungary

TRIAL-BY-TRIAL ERROR CORRECTION FOR ACCURATE BASEBALL PITCHING

A. Kusafuka, T. Okegawa, R. Yamamoto, K. Miyata, K. Kudo

The University of Tokyo, Japan

UPPER AND LOWER EXTREMITY REACTION FORCES DURING VERTICAL ROCK WALL CLIMBING

H. M. English¹, M. W. Young², S. K. Lynch¹, N. D. Flaim², A. Lopez³, M. C. Granatosky²

¹New York Institute of Technology College of Osteopathic Medicine, United States of America; ²New York Institute of Technology Department of Anatomy, United States of America; ³New York Institute of Technology Department of Occupational Therapy, United States of America

AUTOMATICALLY DETECTING FATIGUE GAIT BASED ON TIME SERIES BILATERAL PLANTAR FORCE DISTRIBUTION USING DEEP LEARNING ALGORITHMS.

Z. Gao^1,2,3, Y. He^1,2,3, L. Xiang⁴, F. Gusztáv¹, K. András², Y. Gu³

¹Savaria Institute of Technology, Hungary; ²University of Pannonia, Hungary; ³Ningbo University, China; ⁴University of Auckland, New Zealand

PORE NETWORK MODELLING OF TPMS-BASED SCAFFOLDS FOR TISSUE ENGINEERING APPLICATIONS

J. E. Santos¹, P. S. Martins^2,3, P. R. Fernandes¹, A. P. G. Castro^1,4

¹IDMEC, IST, University of Lisbon, Portugal; ²INEGI, Faculty of Engineering, University of Porto, Portugal; ³ARAID, i3A, University of Zaragoza; ⁴ESTSetúbal, Polytechnic Institute of Setúbal, Portugal

DETERMINING THE EFFECTS OF STRAIN RATE ON UNIAXIAL TENSILE BEHAVIOR OF SINGLE CURLY FIBER

L. Mathebela¹, R. Sigwadi³, T. Lekwana¹, T. Pandelani², H. Ngwangwa¹, F. Nemavhola⁴

¹College of Science Engineering and Technology, University of South Africa; ²Council for Scientific and Industrial Research; ³Department of Chemical Engineering, School of Engineering, College of Science Engineering and Technology, University of South Africa; ⁴Faculty of Engineering and the Built Environment, Durban University of Technology

TWO PHOTON POLYMERIZATION OF AN IMPLANTABLE MICROSCOPE OBJECTIVE FOR INTRAVITAL MICROSCOPY

A. Nardini¹, M. Marini⁴, R. Martinez Vazquez², C. Conci¹, M. Bouzin⁴, M. Collini⁴, R. Osellame², G. N. Cerullo³, B. S. Kariman³, G. Chirico⁴, M. T. Raimondi¹

¹Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy; ²Istituto di Fotonica e Nanotecnologie (IFN)-CNR), Politecnico di Milano, Milano, Italy; ³Department of Physics, Politecnico di Milano, Milano, Italy; ⁴Department of Physics, Università di Milano-Bicocca, Milan, Italy

DEVELOPMENT OF AN IN VITRO PLATFORM TO DETECT TUMORIGENIC EVENTS IN HUMAN HAEMATOPOIETIC STEM CELLS (hHSCs)

P. Ritter^1,2, S. Oliveto^2,3, A. Bocconi^1,4, C. Di Buduo⁴, L. della Volpe⁵, R. Di Micco⁵, A. Balduini⁴, S. Biffo^2,3, M. T. Raimondi¹

¹Politecnico di Milano, Italy; ²INGM, Italy; ³Università di Milano, Italy; ⁴Università di Pavia, Italy; ⁵IRCCS San Raffaele, Italy

DETERMINATION OF MATERIAL PARAMETERS OF SCAFFOLD-FREE CARTILAGE TRANSPLANTS IN DEPENDENCE OF THEIR CULTIVATION

T. Reuter¹, I. Ponomarev², K. Wölfer², D. Barnewitz²

¹ICM e.V., Germany; ²fzmb GmbH, Germany

OSTEOGENIC POTENTIAL OF SUPRAMOLECULAR UPY-ALENDRONATE HYDROGELS: AN IN VITRO STUDY

E. E. A. Cramer¹, J. Huang², P. Y. W. Dankers², K. Ito¹, S. Hofmann¹

¹Orthopaedic Biomechanics, Department of Biomedical Engineering and Institute for Complex Molecular Systems, Eindhoven University of Technology, the Netherlands; ²Biomedical Materials and Chemistry, Department of Biomedical Engineering and Institute for Complex Molecular Systems, Eindhoven University of Technology, the Netherlands

EXPLORATION OF HYDROGEL TISSUE SCAFFOLDS TO IMPROVE THE BIOMECHANICS OF OSTEOPOROTIC BONE.

F. Alabdah^1,2, A. Alshammari^1,2, A. Hidalgo-Bastida³, G. Cooper¹

¹The University of Manchester, United Kingdom; ²The University of Hail, Saudi Arabia; ³Manchester Metropolitan University

EFFECT OF SCAFFOLD POROSITY AND LENGTH ON THE SURFACE CURVATURE OF TPMS STRUCTURES

T. H. V. Pires¹, J. W. C. Dunlop², A. P. G. Castro^1,3, P. R. Fernandes¹

¹IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal; ²MorphoPhysics Group, Department of the Chemistry and Physics of Materials, University of Salzburg, Austria; ³ESTSetúbal, Instituto Politécnico de Setúbal, Portugal

TOPOLOGICALLY OPTIMIZED GRADED GYROID BONE SCAFFOLDS

M. SAHIN¹, O. Parlayan², G. Kiziltas Sendur^2,3

¹Faculty of Engineering and Natural Sciences, Materials Science&Nano Engineering, Sabanci University, Istanbul, Turkiye; ²Faculty of Engineering and Natural Sciences, Mechatronics Engineering, Sabanci University,Turkiye; ³Sabanci University Nanotechnology Research and Application Center, Istanbul,Turkiye

TUNABLE DESIGN AND STRUCTURE-PROPERTY CORRELATIONS OF CORE-SHELL COMPOSITE SCAFFOLDS OBTAINED BY 3D-PRINTING

C. Pasini, L. Sartore, S. Pandini, G. Ramorino

Department of Mechanical and Industrial Engineering, University of Brescia, Italy

DEVELOPMENT OF AN ADVANCED CULTURE SYSTEM TO INVESTIGATE VASCULAR TISSUE ENGINEERING BIOMECHANISMS

E. Pederzani¹, C. E. Campiglio², M. Ripamonti³, A. Rizzo¹, M. Esposito¹, A. Caldiroli⁴, S. A. Riboldi⁴, A. Remuzzi², G. B. Fiore¹, M. Soncini¹

¹Politecnico di Milano, Italy; ²University of Bergamo, Italy; ³Istituto di Ricerche Farmacologiche Mario Negri-IRCCS, Italy; ⁴Dialybrid S.r.l., R&D, Italy

NOVEL BIORESORBABLE PULMONARY VALVES: EXPERIMENTAL ASSESSMENT THROUGH AN ANIMAL TRIAL

A. Hendrickx¹, T. Vervenne², H. Shirazi², T. Langenaeken¹, H. Bauer³, H. Fehervary², M. Cox³, P. Claus⁴, N. Famaey², B. Meuris¹

¹Experimental Cardiac Surgery, KU Leuven, Belgium; ²Mechanical Engineering, KU Leuven, Belgium; ³Xeltis BV Research and Development, Eindhoven, The Netherlands; ⁴Cardiovascular Imaging and Dynamics, KU Leuven, Belgium

MULTISCALE MODELING OF VASCULAR ADAPTATION PROCESSES: ACHIEVEMENTS AND FUTURE PERSPECTIVES

C. Chiastra

Politecnico di Torino, Italy

ROLE OF ANGIOTENSIN 1B RECEPTORS IN INDUCING REGIONAL DISPARITIES IN HYPERTENSIVE AORTIC REMODELING

C. Cavinato^1,2, A. W. Caulk¹, B. Spronck^1,3, S.-I. Murtada¹, J. D. Humphrey^1,4

¹Department of Biomedical Engineering, Yale University, New Haven, CT, USA; ²LMGC, University of Montpellier, CNRS, Montpellier, France; ³Department of Biomedical Engineering, Maastricht University, Maastricht, The Netherlands; ⁴Vascular Biology and Therapeutics Program, Yale School of Medicine, New Haven, CT, USA

LOAD-INDUCED MICROSTRUCTURAL CHANGES OF COLLAGEN AND ELASTIN FIBERS IN THE HUMAN AORTIC WALL ARE LAYER-SPECIFIC

A. Pukaluk¹, H. Wolinski^2,3, C. Viertler⁴, P. Regitnig⁴, G. A. Holzapfel^1,5, G. Sommer¹

¹Institute of Biomechanics, Graz University of Technology, Austria; ²Institute of Molecular Biosciences, University of Graz, Austria; ³Field of Excellence BioHealth – University of Graz, Austria; ⁴Diagnostic and Research Institute of Pathology, Medical University of Graz, Austria; ⁵Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Norway

MULTISCALE COMPUTATIONAL MODELING OF NOTCH SIGNALING IN MECHANO-REGULATED GROWTH AND REMODELING

J. van Asten¹, T. Ristori¹, F. Baaijens¹, C. Sahlgren^1,2, J. Humphrey³, S. Loerakker¹

¹Eindhoven University of Technology, the Netherlands; ²Åbo Akademi, Finland; ³Yale University, Unites States

IN SILICO MODELLING OF THE MULTISCALE AND CHEMO-MECHANO-BIOLOGICAL MECHANISMS BEHIND VASCULAR TONE ADAPTATION

M. Marino¹, B. Sauty^1,2

¹University of Rome Tor Vergata, Italy; ²Mines Saint Etienne, France

ACTIVE MATTER MEETS BIOENGINEERING: HOW MODELS OF ACTIVE TISSUE MECHANICS CAN IMPROVE BIOFABRICATION

B. Smeets

KU Leuven, Belgium

MECHANOBIOLOGICAL REGULATION OF LARGE BONE DEFECT REGENERATION WITHIN MEW AND FDM SCAFFOLDS

C. Dazzi^1,2, K. F. Eichholz³, F. E. Freeman^3,4, D. J. Kelly³, S. Checa^1,2

¹Julius Wolff Institute, Berlin Institute of Health, Charité – Universitätsmedizin Berlin, Germany; ²Berlin-Brandenburg School for Regenerative Therapies, Germany; ³Trinity Centre for Biomedical Engineering, Trinity Biomedical Sciences Institute, Trinity College Dublin, Ireland; ⁴School of Mechanical and Materials Engineering, University College Dublin, Ireland

NUMERICAL INVESTIGATION OF THE EFFECT OF SHAPE MODIFIED STRESS ENVIRONMENT ON OSTEOBLAST BONE REMODELLING.

A. Alshammari^1,2, F. Alabdah^1,2, W. Wang¹, G. Cooper¹

¹University of Manchester, United Kingdom; ²University of Hail, Saudi Arabia

BIOMIMETIC BIOREACTOR FOR AIR-LIQUID INTERFACE CULTURE - SKIN TISSUE ENGINEERING APPLICATION

B. Masante^1,2, S. Gabetti¹, S. Villata³, D. Baruffaldi³, A. Sanginario⁴, F. Frascella³, A. L. Audenino¹, D. Massai¹

¹PolitoBIOMed Lab and Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Italy; ²Department of Surgical Sciences, University of Torino, Italy; ³Department of Applied Science and Technology, Politecnico di Torino, Italy; ⁴Department of Electronics and Telecommunications, Politecnico di Torino, Italy

DEVELOPMENT OF A COMPUTATIONAL/EXPERIMENTAL MODEL OF 3D VASCULARIZED TISSUES

C. Martinelli¹, L. Grezzi¹, T. Baldissera¹, G. Chirico², C. Conci¹, E. Jacchetti¹, M. T. Raimondi¹

¹Department of Chemistry, Materials and Chemical Engineering "Giulio Natta", Politecnico di Milano, Piazza Leonardo da Vinci, 32, 20133 Milan, Italy; ²INFN and Department of Physics, University of Milano Bicocca, Piazza della Scienza 3, 20126 Milan, Italy

QUADRICEPS AND HAMSTRINGS FORCE AND RATE-OF-FORCE DEVELOPMENT DEFICITS IN PEOPLE BEFORE ACL SURGERY

T. Yona¹, B. Peskin², A. G. Fischer¹

¹Department of Biomedical Engineering, Technion, Israel Institute of Technology, Haifa, Israel; ²Rambam medical center, Department of Orthopaedics, Haifa, Israel

UPPER LIMB CRANKING ASYMMETRY DURING A WINGATE ANAEROBIC TEST IN WHEELCHAIR BASKETBALL PLAYERS.

F. Brassart^1,3, A. Faupin¹, A. Hays², S. Bakatchina¹, I. Alberca¹, E. Watelain¹, T. Weissland³

¹Université de Toulon, IAPS - N°201723207F, 83957 La Garde, France; ²ISM, UMR 7287, CNRS & Aix Marseille Univ, Marseille, France; ³Laboratoire IMS, UMR 5218, PMH_DySCo, Pessac, France

PREDICTING BRAIN STRAIN IN RUGBY HEAD IMPACT SIMULATIONS: IDENTIFYING KEY FEATURES

D. Stitt^1,2, N. Kabaliuk^1,2, N. Ward³, K. Alexander¹, N. Draper^2,4

¹University of Canterbury Mechanical Engineering Department, New Zealand; ²Sports Health and Rehabilitation Research Center (SHARRC), University of Canterbury, New Zealand; ³University of Canterbury Department of Mathematics, New Zealand; ⁴University of Canterbury Faculty of Health, New Zealand

RUNNING IN CHILDREN WITH HEMIPLEGIA USING A NEW POSTERIOR LEAF ANKLE FOOT ORTHOSIS

F. Camuncoli¹, A. Pesenti¹, L. Piccinini², E. Di Stanislao³, C. Corbetta², M. Galli¹

¹Politecnico di Milano, Italy; ²IRCCS Eugenio Medea, Italy; ³ITOP SpA Officine Ortopediche, Italy

MUSCLE OXYGEN SATURATION AS A BIOMARKER TO GUIDE RETURN TO PLAY AFTER ACUTE CRUCIATE LIGAMENT RECONSTRUCTION

H. D. VanBibber^1,2, E. R. Harlow^1,2, A. J. Moyal^1,2, B. J. Geletka¹, J. G. Calcei^1,2, J. E. Voos^1,2, D. R. Seshadri^1,2

¹University Hospitals Cleveland Medical Center, United States of America; ²Case Western Reserve University, United States of America

VALIDATION OF OSTEOPOROTIC SYNTHETIC FEMORA – A MORE REALISTIC ALTERNATIVE TO EPOXY BONES?

M. Hollensteiner, S. Sandriesser, P. Augat

BG Unfallklinik Murnau gGmbH and Paracelsus Medical University Salzburg, Murnau, Germany

AN EXHAUSTIVE TEST PROTOCOL FOR THE MECHANICAL CHARACTERIZATION OF SURGICAL MESHES

V. Civilini^1,2, V. Giacalone^1,2, A. L. Audenino^1,2, M. Terzini^1,2

¹PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy; ²Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy

WHAT DO SURGEONS HEAR AND FEEL WHEN BREACHING CORTICAL WALLS AND HOW DO BREACHES EFFECT SCREW PURCHASE?

T. Lange^1,2, M. P. Russo^1,2,3, J. J. Costi^1,2,3, K. J. Reynolds^1,2

¹College of Science and Engineering; Flinders University, Australia; ²Medical Device Research Institute (MDRI); ³Biomechanics and Implants Research Group

IMAGING AND MECHANICAL CHARACTERISATION OF HUMAN BLOOD CLOT ANALOGUES WITH DIFFERENT COMPOSITIONS AND DEGREES OF CONTRACTION

R. Cahalane¹, J. Cruts¹, A. Rachid², K. van Gaalen¹, H. van Beusekom¹, M. de Maat¹, M. Dijkshoorn¹, N. Boodt¹, A. van der Lugt¹, F. Gijsen^1,3

¹Erasmus Medical Center, the Netherlands; ²Eindhoven University of Technology, the Netherlands; ³Delft University of Technology, the Netherlands

CHARACTERIZING PORO-VISCOELASTIC MATERIAL PROPERTIES OF BRAIN TISSUE-MIMICKING HYDROGELS

M. P. Kainz¹, A. Greiner², J. Hinrichsen², D. Kolb^3,4, E. Comellas⁵, P. Steinmann^2,6, S. Budday², M. Terzano¹, G. A. Holzapfel^1,7

¹Institute of Biomechanics, Graz University of Technology, Austria; ²Department of Mechanical Engineering, Institute of Applied Mechanics, FAU Erlangen-Nürnberg, Germany; ³Core Facility Ultrastructure Analysis, Center for Medical Research, Medical University of Graz, Austria; ⁴Division of Cell Biology, Histology and Embryology, Gottfried Schatz Research Center, Medical University of Graz, Austria; ⁵Serra Húnter Fellow, Department of Physics, Universitat Politécnica de Catalunya (UPC), Spain; ⁶Glasgow Computational Engineering Centre, University of Glasgow, United Kingdom; ⁷Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Norway

PATIENT SPECIFIC FINITE ELEMENT ANALYSIS OF HUMAN CORNEAL LENTICULES: AN EXPERIMENTAL AND NUMERICAL STUDY

M. H. Nambiar¹, L. Liechti¹, H. Studer², A. S. Roy³, T. G. Seiler⁴, P. Büchler¹

¹University of Bern, Switzerland; ²Optimo Medical AG, Switzerland; ³Narayana Nethralaya Eye Clinic, India; ⁴Institut für Refraktive und Ophthalmo-Chirurgie (IROC), Switzerland

MECHANICAL CHARACTERIZATION OF PORCINE CORNEAS THROUGH DIGITAL IMAGE CORRELATION ANALYSIS

M. Frigelli¹, B. Fantaci², A. Frechilla³, P. Büchler¹, B. Calvo², S. Kling^1,4

¹ARTORG Center for Biomedical Engineering Research, University of Bern, Switzerland; ²Aragón Institute of Engineering Research (I3A), University of Zaragoza, Spain; ³Institute of Nanoscience and Materials of Aragon (CSIC), University of Zaragoza, Spain; ⁴Institute for Biomedical Engineering, ITET department, ETH Zürich, Switzerland

AN ENERGETIC ANALYSIS OF THE NON-CONTACT TONOMETRY: COMBINING NUMERICAL SIMULATIONS AND CLINICAL IMAGES

E. Redaelli¹, B. Calvo¹, G. Luraghi², J. F. Rodriguez Matas², J. Grasa¹

¹Universidad de Zaragoza, Spain; ²Politecnico di Milano, Italy

PATIENT-SPECIFIC OPTO-MECHANICAL MODELLING OF PHOTOREFRACTIVE KERATECTOMY

B. Fantaci¹, M. Á. Ariza Gracia², B. Calvo^1,3

¹Aragón Institute of Engineering Research (i3A), University of Zaragoza, Spain; ²ARTORG, University of Bern, Switzerland; ³Bioengineering, Biomaterials and Nanomedicine Networking Biomedical Research Centre (CIBER-BBN), Zaragoza, Spain

MODELLING OF EYE LENS FUNCTION: OPTICAL AND MATERIAL PROPERTIES

B. Pierscionek¹, L. Ye¹, K. Wang²

¹Anglia Ruskin University, United Kingdom; ²Beijing Advanced Innovation Centre for Biomedical Engineering, School of Engineering Medicine, Beihang University, Beijing, China

IN SILICO – IN VITRO MECHANICAL CHARACTERIZATION OF TI6AL4V GYROID SCAFFOLDS

F. Perez Boerema¹, F. Distefano², G. Epasto², L. Geris^1,3

¹KU Leuven, Belgium; ²University of Messina, Italy; ³University of Liège, Belgium

POST-YIELD AND FAILURE IN SEMI-CRYSTALLINE PLLA: THE ROLE OF PLASTICITY IN THE AMORPHOUS PHASE

A. R. Abaei, T. J. Vaughan, W. Ronan

University of Galway, Ireland

MULTISCALE COMPUTATIONAL MODELS FOR PREDICTING HYDROGEL VISCOELASTIC PROPERTIES

N. Guazzelli^1,2,3, L. Cacopardo^1,2,3, V. Inghirami², A. Ahluwalia^1,2,3

¹Department of Information Engineering, School of Engineering, University of Pisa; ²Research Centre “E. Piaggio”, University of Pisa; ³Centro Interuniversitario per la Promozione dei Principi delle 3R nella Didattica e nella Ricerca, Centro 3R, University of Pisa

POROUS TITANIUM/BRUSHITE SCAFFOLDS FOR THE TREATMENT OF LARGE BONE DEFECTS

D. Abdulaziz¹, A. Anastasiou², V. Panagiotopoulou³, E. M. Raif⁴, P. Giannoudis⁵, A. Jha¹

¹School of Chemical and Process Engineering, University of Leeds, UK; ²Department of Chemical Engineering and Analytical Science, University of Manchester, UK; ³School of Mechanical Engineering, University of Patras, Greece; ⁴Division of Oral Biology, University of Leeds, UK; ⁵Academic Department of Trauma and Orthopaedic, School of Medicine, University of Leeds, UK

TAILORED MECHANICAL PROPERTIES OF POLYVINYL ALCOHOL HYDROGELS FOR ARTICULAR CARTILAGE REPAIR

S. Todros¹, M. Confalonieri¹, S. Spadoni¹, S. Barbon², E. Stocco², V. Macchi², R. De Caro², A. Porzionato², P. Pavan^1,3

¹Department of Industrial Engineering, University of Padova, Italy; ²Department of Neurosciences, Section of Human Anatomy, University of Padova, Italy; ³Fondazione Istituto di Ricerca Pediatrica Città della Speranza, Padova, Italy

TUNING THE MECHANICAL PROPERTIES OF ALGINATE DIALDEHYDE-GELATIN (ADA-GEL) BIOINKS FOR BIOPRINTING APPROACHES BY VARYING THE OXIDATION DEGREE

J. Faber, J. Hinrichsen, A. Ahmadi Soufivand, H.-H. Lu, A. Boccaccini, S. Budday

FAU Erlangen, Germany

THE EFFECT OF IMPLANT DESIGN ON SUPPORT MOMENT ASYMMETRY IN TOTAL KNEE ARTHROPLASTY PATIENTS DURING SIT/STAND TASKS

N. S. Ryan¹, A. Poirier^1,2, E. Kowalski¹, M. Lamontagne¹

¹University of Ottawa, Canada; ²Université de Technologie de Compiègne, France

KNEE JOINT PIVOT MOTION PATTERN DURING WALKING BEFORE AND AFTER UNICOMPARTMENTAL ARTHROPLASTY

R. Courteille¹, L. Chèze², C. Batailler³, S. Lustig³, N. Hagemeister¹

¹LIO, École de technologie Supérieure, Montréal, Canada; ²Univ Eiffel, Univ Lyon 1, LBMC UMR_T 9406, F-69622 Lyon, France; ³Hôpital de la Croix Rousse, Lyon, France

MUSCLE FUNCTION AFTER MODIFIED SURGICAL TREATMENT OF COMPLETE HAMSTRING AVULSIONS IN AN ELDERLY POPULATION

M. Mauch^1,2, C. Nüesch^1,2,3,4, L. Bühl^1,2, T. Chocholac¹, A. Mündermann^1,2,3, K. Stoffel¹

¹Department of Orthopedics and Traumatology, University Hospital Basel, Switzerland; ²Department of Biomedical Engineering, University of Basel, Switzerland; ³Department of Clinical Research, University of Basel, Switzerland; ⁴Department of Spine Surgery, University Hospital Basel, Switzerland

SIMILAR KNEE MECHANICS BUT DIFFERENT MUSCLE ACTIVITY: TIME FOR AUGMENTED ACL REPAIR AS ALTERNATIVE ACL SURGERY

L. Bühl^1,2,3, S. Müller^1,2,3, C. Nüesch^1,2,3,4, K. A. Boyer⁵, E. Casto⁶, C. Egloff^1,2,3, A. Mündermann^1,2,3,4

¹Universitätsspital Basel, Universität Basel, Basel, Switzerland; ²University Basel, Department of Biomedical Engineering, Basel, Switzerland; ³Department of Clinical Research, University of Basel, Basel, Switzerland; ⁴Department of Spine Surgery, University Hospital Basel, Basel, Switzerland; ⁵Department of Kinesiology, University of Massachusetts Amherst, Amherst, Massachusetts, United States; ⁶Department of Orthopedics and Physical Rehabilitation, University of Massachusetts Medical School, Worcester, Massachusetts, United States

REAL WORLD GAIT ASSESSMENT IN PEOPLE BEFORE ACL SURGERY USING IMU AND STATISTICAL PARAMETRIC MAPPING

T. Yona¹, B. Peskin², A. G. Fischer¹

¹Department of Biomedical Engineering, Technion, Israel Institute of Technology, Haifa, Israel; ²Rambam medical center, Department of Orthopaedics, Haifa, Israel

CHANGES IN SUBCHONDRAL BONE MICROSTRUCTURE AND SHAPE WITH AGE IN TIBIAL KNEE

L. A. Muller¹, A. Tits¹, R. Weinkamer², P. Drion¹, E. Dall'Ara³, G. H. van Lenthe⁴, D. Ruffoni¹

¹University of Liège, Belgium; ²Max Planck Institute of Colloids and Interfaces, Germany; ³University of Sheffield, UK; ⁴KU Leuven, Belgium

BIOMECHANICAL ASSESSMENT OF BONE GRAFT STABILITY USING A FEMORAL OVINE MODEL

L. S Esquivel¹, G. A Day¹, M. Mengoni¹, H. L Fermor², R. K Wilcox¹

¹Institute of Medical and Biological Engineering, University of Leeds, United Kingdom; ²School of Biomedical Sciences, University of Leeds, United Kingdom

HYPERELASTIC MATERIAL PROPERTIES OF PORCINE GROWTH PLATES VARY BY ANATOMICAL LOCATION

L. Hucke¹, G. Teixeira², J. Schwer², A. Seitz², A. Wittek¹

¹Personalized Biomedical Engineering Lab, Frankfurt University of Applied Sciences, Frankfurt, Germany; ²Institute of Orthopaedic Research and Biomechanics, Ulm University Medical Centre, Ulm, Germany

DETERMINING STRESS RELAXATION OF TRABECULAR BONE TO SIMULATE PRESS-FIT CONDITIONS FOR CEMENTLESS IMPLANTS

T. Gersie¹, T. Bitter¹, D. Wolfson², R. Freeman², N. Verdonschot^1,3, D. Janssen¹

¹Radboudumc, Netherlands; ²Depuy Synthes, UK; ³University of Twente, Netherlands

3D STRAIN MEASUREMENT OF THE TENDON-BONE JUNCTION USING IN-SITU XCT MECHANICS AND DIGITAL VOLUME CORRELATION

A. Moayedi¹, K. Karali¹, J. Radulovic¹, G. Blunn²

¹Department of Mechanical and Design Engineering, University of Portsmouth, UK; ²Department of Pharmacy and Biomedical Sciences, University of Portsmouth, UK

A COMPUTATIONAL INVESTIGATION OF THE TENDON-TO-BONE INSERTION: THE ROLE OF TISSUE ANISOTROPY

A. Malerba¹, A. Tits¹, T. Volders¹, P. Vena², D. Ruffoni¹

¹ULiège, Belgium; ²Politecnico di Milano, Italy

THE EFFECT OF PRESTRESS IN TAVI PROCEDURE FINITE ELEMENTS SIMULATIONS ON PATIENT SPECIFIC GEOMETRIES

V. Lissoni, M. Farina, G. Mora, J. F. Rodriguez Matas, G. Luraghi

Politecnico di Milano, Italy

IMPACT OF PATIENT MORPHOLOGY ON VALVE THROMBOSIS – COMBINING PATIENT DATA AND COMPUTATIONAL MODELING

S. E. Jahren¹, C. Demirel², K.-M. Bornemann¹, P. Corso¹, S. Stortecky², D. Obrist¹

¹ARTORG Center, University of Bern, Switzerland; ²Department of Cardiology, Inselspital, University of Bern, Switzerland

BIOMECHANICAL ANALYSIS OF AORTIC ROOTS BASED ON ECHOCARDIOGRAPHIC IMAGES: DIFFERENCES BETWEEN TRICUSPID AND BICUSPID AORTIC VALVE PATIENTS

P. Mortensen¹, C. Rosnel¹, A. Pouch², A. Aggarwal¹

¹University of Glasgow, United Kingdom; ²University of Pennsylvania, United States of America

COMPUTATIONAL MODELLING APPROACHES TO ASSESS THE IN VITRO PERFORMANCE OF A TAVR DEVICE

S. Boxwell^1,2, D. Armfield², P. Cardiff², S. Cook³, D. Loughnane³, P. Kelly³, L. McNamara¹

¹Mechanobiology and Medical Device Research Group, Department of Biomedical Engineering, University of Galway, Galway, Ireland; ²School of Mechanical and Materials Engineering, University College Dublin, Dublin, Ireland; ³Structural Heart Department, Boston Scientific Corporation, Galway, Ireland

COMPUTATIONAL MITRAL VALVE MODELING THROUGH A COMPREHENSIVE MRI-BASED APPROACH

D. Tondi¹, F. Sturla^2,1, M. Marin-Cuartas³, R. Spampinato³, M.-T. Dieterlen³, A. Redaelli¹, M. A. Borger³, E. Votta^1,2

¹Politecnico di Milano, Italy; ²IRCCS Policlinico San Donato, San Donato Milanese, Italy; ³Leipzig Heart Center, Leipzig, Germany

CFD SIMULATIONS OF THE CO2 REBREATHING IN DIFFERENT HELMET-LIKE INTERFACES FOR THE CPAP THERAPY DELIVERY

A. Formaggio^1,2, M. De Luca^1,2, G. Putame^1,2, S. Borrelli^1,2, A. L. Audenino^1,2, M. Terzini^1,2

¹Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino (Italy); ²PolitoBIOMed Lab, Politecnico di Torino, Torino (Italy)

EXPERIMENTAL COMPARISON OF PRESSURE PERFORMANCES IN DIFFERENT CPAP DELIVERY TECHNIQUES

M. De Luca^1,2, A. Formaggio^1,2, G. Putame^1,2, S. Borrelli^1,2, A. L. Audenino^1,2, M. Terzini^1,2

¹Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino (Italy); ²PolitoBIOMed Lab, Politecnico di Torino, Torino (Italy)

MODELING AEROSOL DELIVERY IN STENOSED AND STENTED TRACHEAS CONSIDERING DIFFERENT BREATHING CONDITIONS

R. Fernández Parra¹, C. Sánchez Matás², J. L. López Villalobos³, M. Malvè⁴

¹Faculty of Veterinary Medicine, Catholic University of Valencia 'San Vicente Martir', Valencia, Spain; ²Department of Thoracic Surgery, University Hospital 'La Paz', Madrid, Spain; ³Department of Thoracic Surgery, University Hospital 'Virgen del Rocio', Seville, Spain; ⁴Public University of Navarre, Pamplona, Spain

COMPUTATIONAL OPTIMIZATION OF A SENSORIZED 3D-PRINTED SMART PATCH FOR CARDIORESPIRATORY MONITORING

D. Bianchi, D. Lo Presti, C. Massaroni, A. Gizzi, E. Schena

University of Rome Campus Biomedico, Italy

THE INFLUENCE OF CROSS-LINKING ON THE DEFORMATION MECHANISM OF COLLAGEN FIBRILS

J. T. Kamml¹, C.-Y. Ke², C. Acevedo³, D. S. Kammer¹

¹ETH Zürich, Switzerland; ²Pennsylvania State University, USA; ³University of Utah, USA

UNCERTAINTY QUANTIFICATION COUPLED WITH FINITE ELEMENT SIMULATION OF THE SECOND STAGE OF LABOR

T.-N.-T. Nguyen, A. Ballit, J.-F. Witz, P. L. Grosbras, J.-B. Colliat, T.-T. Dao

École Centrale de Lille, France

TOWARDS PREDICTING THE DISCRETE GRADES FOR PROGRESSIVE CHANGES OF KNEE OSTEOARTHRITIS: A FINITE ELEMENT STUDY

A. Paz^1,2, M. J. Turunen¹, J. J. García², R. K. Korhonen¹, M. E. Mononen¹

¹University of Eastern Finland, Finland; ²Universidad del Valle, Colombia

SENSITIVITY STUDY OF THE HILL MUSCLE MODEL IN A MUSCULOSKELETAL SHOULDER MODEL

J. Fliri¹, J. Menze^1,2, M. A. Zumstein^3,4, S. J. Ferguson², J. Burger¹, A. Oswald⁵, K. Gerber¹

¹SBPE, University of Bern, Switzerland; ²ETH Zurich, Switzerland; ³University Hospital Bern, Switzerland; ⁴Orthopaedics Sonnenhof, Switzerland; ⁵Universität Bern, Switzerland

THE GAPPING BEHAVIOUR OF THE MENISCUS VARIES ACCORDING TO THE TEAR TYPE

M. Sukopp¹, J. Frey¹, M. Kalbitz², A. Ignatius¹, A. M. Seitz¹

¹Institute of Orthopaedic Research and Biomechanics, Ulm University Medical Centre, Germany; ²Department of Trauma and Orthopedic Surgery, University Hospital Erlangen, Germany

PATELLA DESIGN AND ISOLATED EFFECTS OF PATELLAR RESURFACING IN TOTAL KNEE ARTHROPLASTY

A. Sauer^1,2, C. Thorwaechter², I. Dupraz¹, A. Maas^1,2, A. Steinbrueck¹, T. M. Grupp^1,2, M. Woiczinski¹

¹Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital, LMU Munich; ²Aesculap AG, Research and Development, Am Aesculap-Platz, 78532 Tuttlingen, Germany

HOW WELL DOES A NEW DEVELOPED PIVOT TKA RESTORE THE NATIVE KINEMATICS: A CADAVERIC STUDY

C. Thorwächter¹, B. Richter², B. Altermann², A. Bollinger², H. Windhagen³, B. Holzapfel¹, P. Müller¹, T. Grupp², M. Woiczinski¹

¹Musculoskeletal University Center Munich (MUM), Ludwig Maximilian University of Munich (LMU), Germany; ²Aesculap AG, Research and Development, Germany; ³Department of Orthopaedic Surgery at Diakovere Annastift, Hannover Medical School, Hannover, Germany

INFLUENCE OF BIOMECHANICAL LOADING ON THE PHYSICAL BEHAVIOR OF A HYDROGEL AFTER INJECTION INTO NATIVE HUMAN KNEES

S. Krüger¹, S. A. Brendle^1,2, K. Benz³, C. Merckle¹, T. M. Grupp^1,2

¹Aesculap AG, Tuttlingen, Germany; ²Department of Orthopaedic and Trauma Surgery, Musculoskeletal University Center Munich (MUM), Campus Grosshadern, LMU Munich, Munich, Germany; ³Tetec AG, Reutlingen, Germany