28th Congress of the European Society of Biomechanics

A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding surname. Select the presentation in the right-hand column to access session and presentation details.

Author(s)	Organization(s)	Contribution Title
Abaei, Ali Reza	University of Galway, Ireland	POST-YIELD AND FAILURE IN SEMI-CRYSTALLINE PLLA: THE ROLE OF PLASTICITY IN THE AMORPHOUS PHASE Presenter
Abdel-Raouf, Yousof Mohamed Assaad	Ghent University, Belgium	DISSECTING THE ROLE OF ELASTIN BIOMECHANICS USING THE FINITE ELEMENT METHOD
Abdulaziz, Dina	School of Chemical and Process Engineering, University of Leeds, UK	POROUS TITANIUM/BRUSHITE SCAFFOLDS FOR THE TREATMENT OF LARGE BONE DEFECTS Presenter
Abinzano, Florencia	Department of Biomedical Engineering, Eindhoven University of Technology, The Netherlands	LARGE-SCALE PRODUCTION OF ACPC-DERIVED CARTILAGE ORGANOIDS Presenter
Abizanda, Gloria	University of Navarra (UNAV), Spain; Instituto de Investigación Sanitaria de Navarra (IdiSNA), Spain	COMPUTATIONAL SIMULATION OF THE ACTIVE BEHAVIOUR OF MOUSE ROTATOR CUFF MUSCLES
Abkar, Mahdi	Aarhus University, Denmark	DIGITAL TWIN ANALYSIS OF AORTIC ROOT FLOW DISTURBANCES FOLLOWING TRANSCATHETER IMPLANTATION AND 4D MRI
Abouzaid, Khaoula	CNRS, MSME UMR 8208, France	THREE-DIMENSIONAL OSTEOCYTE LACUNO-CANALICULAR NETWORK AT THE BONE IMPLANT INTERFACE Presenter
Abran, Guillaume	LAM – Motion Lab, Liège, Belgium; Department of Movement and rehabilitation sciences, University of Liege, Belgium	COMPARISON OF FOOT-ANKLE MECHANICS AND MUSCULAR ACTIVATION BETWEEN RUNNING DRILLS AND RUNNING ACROSS DIFFERENT SPEEDS. Presenter
Abu Hantash, Mohd Khalil	Khalifa University, United Arab Emirates	PERFORMANCE OF TWO POSE ESTIMATION ALGORITHMS IN GAIT ANALYSIS AGAINST THE VICON REFERENCE SYSTEM
Abu Kaff, Balqees	Ben-Gurion university, Israel	A TOOL FOR STUDYING THE ROLE OF INTERCELLULAR STRESSES AND DYNAMIC CELL SHAPE MODULATIONS IN MECHANICAL INHIBITION OF CELL DIVISION
Abubaker, Mannthalah	University of Limerick, Ireland	THE EFFECT OF SUBSTRATE STIFFNESS ON ASTROCYTES AND LEPTOMENINGEAL CELLS The effect of substrate stiffness on astrocytes and leptomeningeal cells
Açan, Alp Kağan	Middle East Technical University, Turkiye	A DATA-DRIVEN CONSTITUTIVE FRAMEWORK FOR SOFT BIOLOGICAL TISSUES
Acevedo, Claire	University of Utah, United States of America	MINERAL MOBILIZATION NEAR THE LACUNAR AND CANAL NETWORK IN LACTATION
Acevedo, Claire	University of Utah, USA	THE INFLUENCE OF CROSS-LINKING ON THE DEFORMATION MECHANISM OF COLLAGEN FIBRILS
Ackermans, Thijs	KU Leuven, Belgium	RECOVERY OF SHOULDER MOTION DURING GAIT AT 1-WEEK, 3-MONTHS AND 1-YEAR AFTER SPINAL FUSION SURGERY IN AIS Presenter VERTEBRAL BODY TETHERING VS SPINAL FUSION: LOOKING BEYOND THE RADIOGRAPHICAL OUTCOME Presenter
Adachi, Taiji	Kyoto University, Japan	A PLATFORM FOR IN-SILICO EXPERIMENT OF BONE REMODELING FOR UNDERSTANDING ROLES OF MECHANO-CHEMICAL COUPLINGS ACTIN FILAMENTS IN RESPONSE TO CHEMICAL OSTEOGENESIS SUPPLEMENTS ALTER THE MULITCELLULAR BEHAVIOR OF OSTEOCYTIC SPHEROIDS IN SILICO EXPLORATION OF OSTEOPOROSIS DRUG EFFECTS ON BONE ADAPTATION BASED ON REMODELING AND MODELING MECHANICAL MODELING OF CEREBELLAR FOLIATION CAUSED BY MULTICELLULAR ACTIVITIES MODELING AND SIMULATION OF TISSUE GROWTH CAUSED BY CELL PROLIFERATION DURING MORPHOGENESIS
Adorno, Bruno	Department of Electrical and Electronic Engineering, University of Manchester, United Kingdom	CLINICAL PERSPECTIVE OF DEVELOPING ROBOTIC SYSTEMS FOR ASSISTING PERCUTANEOUS TRACHEOSTOMY
Aertbeliën, Erwin	KU Leuven & Flanders Make, Belgium	KNEE FLEXION ANGLE ESTIMATION BASED ON FUNCTIONALLY INSTEAD OF ANATOMICALLY DEFINED COORDINATE SYSTEMS
Affenzeller, Nadja	Section of Physical Therapy, Small Animal Surgery, Department for Companion Animals and Horses, University of Veterinary Medicine, Vienna,	EFFECT OF VISION AND SURFACE SLOPE ON POSTURAL SWAY IN HEALTHY ADULTS
Africa, Pasquale Claudio	Politecnico di Milano, Italy	A BIOPHYSICALLY DETAILED COMPUTATIONAL MODEL OF THE FOUR CHAMBER HUMAN HEART ELECTROMECHANICS
Aggarwal, Ankush	University of Glasgow, United Kingdom; Glasgow Computational Engineering Centre, University of Glasgow	BIOMECHANICAL ANALYSIS OF AORTIC ROOTS BASED ON ECHOCARDIOGRAPHIC IMAGES: DIFFERENCES BETWEEN TRICUSPID AND BICUSPID AORTIC VALVE PATIENTS Presenter IN SILICO MODELLING OF ENDOVASCULAR DRUG DELIVERY FROM DRUG-COATED BALLOONS
Aggelousis, Nikolaos	School of Physical Education and Sport Science, Democritus University of Thrace, Greece	CLINICAL VALIDATION OF STATIC OPTIMIZATION DURING POST STROKE GAIT GENERALIZATION OF MACHINE LEARNING MODEL PREDICTIONS OF KNEE JOINT FORCES TO POST STROKE GAIT NEW AUTOMATED ALGORITHM FOR MUSCLE ARCHITECTURE EXTRACTION FROM B-MODE ULTRASOUND IMAGES Presenter
Aghaee, Arman	Department Electrical, Computer and Biomedical Engineering, Toronto Metropolitan University, Toronto, ON, Canada	SINE-BASED ACTIVATION FUNCTION IS SUPERIOR IN PHYSICS-INFORMED NEURAL NETWORK FOR CARDIOVASCULAR FLOWS Presenter
Aghapour, Masoud	Section of Physical Therapy, Small Animal Surgery, Department for Companion Animals and Horses, University of Veterinary Medicine, Vienna,	EFFECT OF VISION AND SURFACE SLOPE ON POSTURAL SWAY IN HEALTHY ADULTS Presenter MEASUREMENT OF JOINT ANGLES IN A CANINE MUSCULOSKELETAL MODEL: DIRECT KINEMATICS VERSUS INVERSE KINEMATICS Presenter
Agnelli, Jacopo	Università degli Studi di Brescia, Italy; University of Brescia, Italy	FRACTURE TOUGHNESS OF CANCELLOUS BONE TISSUES USED FOR THE MANUFACTURING OF HETEROLOGOUS BONE GRAFTS Presenter Fracture toughness of cancellous bone tissues used for the manufacturing of heterologous bone grafts Presenter
Agnifili, Mauro Luca	Department of Clinical and Interventional Cardiology, IRCCS Policlinico San Donato, San Donato Milanese, Italy	LUMPED-PARAMETER MODEL TO ASSESS CORONARY BLOOD FLOW IN AAOCA: A FOCUS ON THE IMPACT OF BOUNDARY CONDITIONS
Aguirre, Miquel	Ecole des Mines de Saint-Etienne, France; Laboratori de Calcul Numeric, Universitat Politecnica de Catalunya, Barcelona, Spain; International Centre for Numerical Methods in Engineering (CIMNE), Barcelona, Spain	FSI COMPUTATIONAL MODEL OF A PATIENT SPECIFIC AAA VALIDATED BY LED ILLUMINATED PIV MACHINE LEARNING AND REDUCED ORDER MODELLING FOR THE SIMULATION OF BRAIDED STENT DEPLOYMENT
Ahluwalia, Arti	Department of Information Engineering, School of Engineering, University of Pisa; Research Centre “E. Piaggio”, University of Pisa; Centro Interuniversitario per la Promozione dei Principi delle 3R nella Didattica e nella Ricerca, Centro 3R, University of Pisa	MULTISCALE COMPUTATIONAL MODELS FOR PREDICTING HYDROGEL VISCOELASTIC PROPERTIES
Ahluwalia, Arti	University of Pisa, Italy	ENGINEERING CURVED MEMBRANES FOR DRUG ABSORPTION TESTS IN THE PRESENCE OF ARTIFICIAL MUCUS
Ahmadi Soufivand, Anahita	FAU Erlangen, Germany	TUNING THE MECHANICAL PROPERTIES OF ALGINATE DIALDEHYDE-GELATIN (ADA-GEL) BIOINKS FOR BIOPRINTING APPROACHES BY VARYING THE OXIDATION DEGREE
Ahmed, Dania	Department of Aeronautics, Imperial College London, UK	THE IMPACT OF 4D-FLOW MRI-DERIVED INLET CONDITIONS IN FLOW SIMULATIONS OF ANEURYSMAL TYPE-B AORTIC DISSECTION THREE-DIMENSIONAL FLOW RECONSTRUCTION IN A DISSECTED AORTA FROM 4D-MRI DATA Presenter
Aho Glélé, Ludwig Serge	University Hospital of Dijon, Dijon, France	AORTIC LOCAL BIOMECHANICAL PROPERTIES IN THE CASE OF ASCENDING AORTIC ANEURYSMS
Ajami, Sara	UCL Great Ormond Street Institute of Child Health; Great Ormond Street Hospital	BONE MATERIAL STRENGTH INDEX TO DIFFERENTIATE EARLY BONE STRUCTURE IN PATIENTS AFFECTED BY CRANIOSYNOSTOSIS
Akhundov, Riad	Griffith Centre of Biomedical and Rehabilitation Engineering (GCORE), Menzies Health Institute Queensland, Griffith University, Australia	CONSEQUENCES OF LIMITING ELECTROMYOGRAPHY AND GROUND REACTION FORCES ON MODELLED ANTERIOR CRUCIATE LIGAMENT FORCES
Akyildiz, Ali Cagdas	Erasmus Medical Center, Rotterdam, The Netherlands; Delft University of Technology, Delft, The Netherlands; Department of Biomedical Engineering, Erasmus Medical Center, Rotterdam, the Netherlands; Department of Biomechanical Engineering, Delft University of Technology, Delft, the Netherlands; Erasmus MC, The Netherlands	ANISOTROPIC PROPERTY CHARACTERIZATION OF HUMAN CAROTID PLAQUES BY USING INVERSE FINITE ELEMENT MODELING Presenter INFLUENCE OF WALL SHEAR AND MECHANICAL STRESS ON ATHEROSCLEROTIC ARTERY DISEASE IN HUMAN CORONARIES INVESTIGATING RUPTURE CHARACTERISTICS OF TISSUE-ENGINEERED ATHEROSCLEROTIC PLAQUE CAPS
Al-Dirini, Rami	Medical Device Research Institute, Flinders University, Australia	VALIDATION OF A KNEE FINITE ELEMENT MODEL FOR THE DEVELOPMENT OF SURGICAL TRAINING MODELS
Al-Nuaimi, Dunja	Institute for Mechanical Systems, Department of Mechanical and Process Engineering, ETH Zürich, Zürich, Switzerland	DERMAL FIBROBLASTS FEEL AND RESPOND TO PHYSIOLOGICAL MECHANICAL CUES IN VITRO
Alabdah, Fahad	The University of Manchester, United Kingdom; The University of Hail, Saudi Arabia	EXPLORATION OF HYDROGEL TISSUE SCAFFOLDS TO IMPROVE THE BIOMECHANICS OF OSTEOPOROTIC BONE. Presenter NUMERICAL INVESTIGATION OF THE EFFECT OF SHAPE MODIFIED STRESS ENVIRONMENT ON OSTEOBLAST BONE REMODELLING.
Albareda, Jorge	Department of surgery, University of Zaragoza; Aragón Health Research Institute	MODELLING THE INITIAL CALLUS PHASE IN BONE FRACTURES
Alberca, Ilona	Université de Toulon, IAPS - N°201723207F, 83957 La Garde, France	UPPER LIMB CRANKING ASYMMETRY DURING A WINGATE ANAEROBIC TEST IN WHEELCHAIR BASKETBALL PLAYERS.
Albini-Lomami, Hugues	CNRS, MSME UMR 8208, France	THREE-DIMENSIONAL OSTEOCYTE LACUNO-CANALICULAR NETWORK AT THE BONE IMPLANT INTERFACE
Aldesoki, Mostafa	Oral Technology, University Hospital Bonn, Germany	NUMERICAL INVESTIGATION ON THE PRIMARY AND SECONDARY STABILITY OF ROOT-ANALOGUE-IMPLANTS
Aldieri, Alessandra	Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy; Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy; Alma Mater Studiorum - University of Bologna, Italy	IN SILICO CLINICAL TRIAL TO PREDICT THE EFFICACY OF HIP PROTECTORS FOR PREVENTING HIP FRACTURES STATISTICAL MODELS INFORMED BY DXA IMAGES SLIGHTLY OUTPERFORM T-SCORE IN THE PREDICTION OF HIP FRACTURE Presenter THE ROLE OF STATISTICAL SHAPE MODELS IN THE DESIGN FRAMEWORK OF OSSEOINTEGRATED IMPLANTS FOR DISTAL FEMUR VALIDATION OF HOMOGENIZED FINITE ELEMENT MODELS OF HUMAN METASTATIC VERTEBRAE USING DIGITAL VOLUME CORRELATION FROM MUSCULOSKELETAL DIGITAL TWINS TO IN SILICO TRIALS OF NEW INTERVENTIONS: A JOURNEY
Alexander, Keith	University of Canterbury Mechanical Engineering Department, New Zealand	PREDICTING BRAIN STRAIN IN RUGBY HEAD IMPACT SIMULATIONS: IDENTIFYING KEY FEATURES
Alfonso, Luca	Department of Mechanical, Energy, Management and Transport Engineering – DIME, University of Genova, 16100 Genova, Italy	INVESTIGATION OF THE IMPACT OF NANOSCALE GEOMETRY ON THE MECHANICAL PROPERTIES OF HYDROXYAPATITE PLATELETS Investigation of the impact of nanoscale geometry on the mechanical properties of hydroxyapatite platelets
Alijani, Hamid	Biomedical Engineering and Biomechanics Research Centre, School of Engineering, College of Science and Engineering, University of Galway, Galway, Ireland.	MICROCRACK NUCLEATION AND FRACTURE IN BONE ULTRASTRUCTURE: A COMPUTATIONAL STUDY Presenter
Alkalay, Ron	. Center for Advanced Orthopedic Studies, Beth Israel Deaconess Medical Center and Harvard Medical School, Boston, USA	INFLUENCE OF METASTATIC LESIONS ON TWO MODELS ASSESSING VERTEBRAL FAILURE
Alkjær, Tine	University of Copenhagen, Denmark; The Parker Institute, Denmark	EFFECT OF WEIGHT LOSS ON SUBCHONDRAL BONE CYST IN THE KNEE JOINT DURING GAIT: A 3D FINITE ELEMENT ANALYSIS ESTIMATION OF KNEE JOINT CONTACT FORCE MAXIMA DURING GAIT USING A VIDEO CAMERA AND DEMOGRAPHIC DATA PREDICTING KNEE CARTILAGE DEGENERATION IN OBESE ADULTS USING PATIENT-SPECIFIC MODELS: DATA FROM THE CAROT TRIAL SENSITIVITY OF KNEE JOINT FINITE ELEMENT SIMULATIONS TO UNCERTAINTIES IN MUSCULOSKELETAL MODELING INPUTS
Allain, Jean-Marc	LMS,Ecole Polytechnique, France; Inria, France	CORNEAL MECHANICS FOR THE EARLY DETECTION OF THE KERATOCONUS Presenter ON THE ANISOTROPY OF THE MYOCARDIUM Presenter
Allard, Valentin	Univ Lyon, Univ Claude Bernard Lyon 1, INSERM, LYOS UMRS 1033, France; Univ Lyon, Univ Gustave Eiffel, Univ Claude Bernard Lyon 1, LBMC UMR_T 9406, 69622 Lyon, France	Intra-operator comparison of two models to predict vertebral failure on the same experimental dataset INFLUENCE OF METASTATIC LESIONS ON TWO MODELS ASSESSING VERTEBRAL FAILURE
Allard, Valentin	Univ Lyon, UCBL, INSERM, LYOS UMR 1033, Lyon, France; Univ Lyon, Univ Claude Bernard Lyon 1, INSERM, LYOS UMRS 1033, France; Univ Lyon, Univ Gustave Eiffel, Univ Claude Bernard Lyon 1, LBMC UMR_T 9406, 69622 Lyon, France	INTRA AND INTER OPERATOR VARIABILITY IN A FINITE ELEMENT MODEL OF VERTEBRA FOR FAILURE LOAD PREDICTION INTRA-OPERATOR COMPARISON OF TWO MODELS TO PREDICT VERTEBRAL FAILURE ON THE SAME EXPERIMENTAL DATASET
Allardyce, Joanna M	Bernal Institute, University of Limerick, Limerick, Ireland	MECHANICAL CHARACTERISATION OF LOWER LIMB VASCULATURE IN DETERMINING AUTOGRAFT SUITABILITY FOR PERIPHERAL ARTERIAL DISEASE BYPASS SURGERIES
Alliston, Tamara	University of California San Francisco, United States of America	MINERAL MOBILIZATION NEAR THE LACUNAR AND CANAL NETWORK IN LACTATION
Almadani, Murad	Khalifa University, United Arab Emirates	PERFORMANCE OF TWO POSE ESTIMATION ALGORITHMS IN GAIT ANALYSIS AGAINST THE VICON REFERENCE SYSTEM
Alnamnam, Nisreen	University of Edinburgh, United Kingdom	ULTRA-HIGH SPEED IMAGING FOR STUDYING ULTRASONIC CUTTING OF BONE & CARTILAGE
Alonso, Thierry	Univ. Grenoble Alpes, CNRS, UMR 5525, VetAgro Sup, Grenoble INP, TIMC, 38000 Grenoble, France	REDUCTION OF STRAIN CLUSTERS IN INJURED HEEL FINITE ELEMENT MODELS WITH A NEW PRESSURE ULCER DRESSING
Alsema, Els	3Centre for Health Protection, National Institute for Public Health and the Environment (RIVM), 3721 MA Bilthoven, the Netherlands	IDENTIFICATION OF IMMUNOMODULATORY TOPOGRAPHIES TO REGULATE MYOFIBROBLAST DIFFERENTIATION AND INFLUENCE FIBROUS ENCAPSULATION
Alshammari, Adel	The University of Manchester, United Kingdom; The University of Hail, Saudi Arabia	EXPLORATION OF HYDROGEL TISSUE SCAFFOLDS TO IMPROVE THE BIOMECHANICS OF OSTEOPOROTIC BONE. NUMERICAL INVESTIGATION OF THE EFFECT OF SHAPE MODIFIED STRESS ENVIRONMENT ON OSTEOBLAST BONE REMODELLING. Presenter
Altermann, Brigitte	Aesculap AG, Research and Development, Germany	HOW WELL DOES A NEW DEVELOPED PIVOT TKA RESTORE THE NATIVE KINEMATICS: A CADAVERIC STUDY
Altundemir, Sercan	Bogazici University, Turkiye	MODELING OF FLUID SHEAR STRESS ON SMOOTH MUSCLE CELLS IN COMMON CAROTID ARTERY MEDIA Presenter
Alves de Sousa, Ricardo	TEMA - Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, Campus Universitário de Santiago, University of Aveiro, 3810-193 Aveiro, Portugal; LASI - Intelligent Systems Associate Laboratory, Portugal	DEVELOPMENT OF A FEMALE FINITE ELEMENT MODEL OF THE CERVICAL SPINE Development of a Female Finite Element Model of the Cervical Spine
Ambard, Dominique	Sim&Cure, Montpellier, France	NUMERICAL DETERMINATION OF AN ANATOMICAL STRUCTURE’S UNLOADED STATE FROM IN VIVO MEDICAL IMAGING
Amicone, Alessio	ETH Zürich, Institute for Biomechanics, Switzerland	MECHANICAL CHARACTERIZATION OF A TRIPHASIC MEW PCL SCAFFOLD MIMICKING ARTICULAR CARTILAGE ARCHITECTURE Presenter
Amini, Shahrouz	Max Planck Institute of Colloids and Interfaces, Germany	MINERAL CONTENT AND MECHANICAL PROPERTIES OF CEMENT LINES IN HUMAN OSTEONAL BONE
Ananth Swaminathan, Siddarth	Berlin Institute of Health at Charité – Universitätsmedizin Berlin, Julius Wolff Institute, Germany	BIOMECHANICAL ALTERATIONS AFTER SPINAL FUSION TREATMENT AND THEIR RELATION TO CAGE SUBSIDENCE Presenter
Anastasiou, Antonios	Department of Chemical Engineering and Analytical Science, University of Manchester, UK	POROUS TITANIUM/BRUSHITE SCAFFOLDS FOR THE TREATMENT OF LARGE BONE DEFECTS
Ancillao, Andrea	TU Wien, Austria	A BIOMECHANICAL MODEL TO TEST THE EFFECTS OF A PASSIVE EXOSKELETON ON THE SHOULDER COMPLEX KNEE FLEXION ANGLE ESTIMATION BASED ON FUNCTIONALLY INSTEAD OF ANATOMICALLY DEFINED COORDINATE SYSTEMS Presenter METABOLIC ANALYSIS OF A WEARABLE UPPER LIMB EXOSKELETON FOR OVERHEAD WORK
Andersen, Michael Skipper	Aalborg University, Denmark; Center for Mathematical Modeling of Knee Osteoarthritis, Aalborg, Denmark	KNEE CARTILAGE MECHANICS IN FINITE ELEMENT ANALYSIS USING INPUTS FROM DIFFERENT MUSCULOSKELETAL SOFTWARE
Andrada, Emanuel	Friedrich-Schiller-University Jena, Germany	KINETICS OF RAT LOCOMOTION NEGOTIATING ACTIVE PERTUBATIONS Presenter
András, Kovács	University of Pannonia, Hungary; Faculty of Sports Science, Ningbo University, China	AUTOMATICALLY DETECTING FATIGUE GAIT BASED ON TIME SERIES BILATERAL PLANTAR FORCE DISTRIBUTION USING DEEP LEARNING ALGORITHMS. LOWER LIMB MUSCLE FORCES IN TABLE TENNIS FOOTWORK DURING TOPSPIN FOREHAND BASED ON MUSCULOSKELETAL
André, António Diogo	FEUP/INEGI/LAETA, Portugal; FEUP, Portugal; INEGI-LAETA, Portugal	A METHODOLOGY TO STUDY THE MECHANICAL PROPERTIES OF NORMAL BREAST TISSUES A METHODOLOGY TO STUDY THE MECHANICAL PROPERTIES OF NORMAL BREAST TISSUES BENDING RESPONSE OF A SOFT ACTUATOR FOR A WEARABLE HAPTIC DEVICE Presenter
Andres, Annchristin	Applied Mechanics, Saarland University, Germany; Saarland University - Applied Mechanics, Germany	AN UNCERTAINTY QUANTIFICATION OF IN-SILICO TRIALS FOR THE USE CASE OF NON-UNION TREATMENT COUPLING EXPERIMENTAL & SIMULATION WORKFLOW OF TREATED HUMAN TIBIA CONCERNING INTERFRAGMENTARY MOVEMENT THE EFFECTS OF PARTIAL WEIGHT BEARING ON THE HEALING PROCESS VIA BIOMECHANICAL SIMULATION Presenter
Andres-Esperanza, Javier	Department of Mechanical Engineering and Construction, Universitat Jaume I, Spain	DESIGN AND OPTIMIZATION OF A SIX-BAR LINKAGE TO ASSIST IN THE REHABILITATION OF THE PULP PINCH GRIP IN STROKE PATIENTS
Andriotis, Orestis G.	Institute of Lightweight Design and Structural Biomechanics, TU Wien, Austria	ENZYMATIC DIGESTION OF TENDONOUS COLLAGEN SHOWS HIGH SPECIFICITY AT THE LEVEL OF THE INDIVIDUAL FIBRIL MECHANICS OF CELL SPHEROIDS UNDER LARGE DEFORMATIONS TENSILE TESTING OF SINGLE COLLAGEN FIBRILS FROM ACHILLES TENDONS FROM AN OSTEOGENESIS IMPERFECTA MOUSE MODEL
Angeletti, Claudia	BioCardioLab, Fondazione Toscana Gabriele Monasterio, Massa, Italy	AORTIC HEMODYNAMICS EVALUATION BASED ON REDUCED ORDER MODELS: EFFECT OF INLET CONDITIONS
Angeli, Thomas	TU Wien, Austria	A BIOMECHANICAL MODEL TO TEST THE EFFECTS OF A PASSIVE EXOSKELETON ON THE SHOULDER COMPLEX METABOLIC ANALYSIS OF A WEARABLE UPPER LIMB EXOSKELETON FOR OVERHEAD WORK
Ângelo, Ana	Hospital CUF Tejo, Portugal	INFLUENCE OF THE TEAR PATTERN ON SHOULDER STABILITY AFTER ARTHROSCOPIC SUPERIOR CAPSULAR RECONSTRUCTION
Anic, Milos	Faculty of Engineering, University of Kragujevac, Serbia; Bioengineering Research and Development Center (BioIRC), Serbia	3D MODELING OF CAROTID ARTERY AND PLAQUE PROGRESSION USING COUPLED AGENT BASED AND FINITE ELEMENT METHODS
Antonini, Luca	LaBS - Dept. of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Italy	ON THE IMPACT OF ARTERIAL MODELLING IN CORONARY STENTING SIMULATIONS: A VALIDATED STUDY ON 5 PATIENT-SPECIFIC CASES
António, Carlos Conceição	Engineering Faculty, University of Porto, Porto, Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering (LAETA-INEGI), Porto, Portugal	CORONARY ARTERY SEGMENTATION IN HYPEREMIA CONDITIONS FOR COMPUTED FFR ANALYSIS CORONARY ARTERY SEGMENTATION IN HYPEREMIA CONDITIONS FOR COMPUTED FFR ANALYSIS IMPACT OF RESISTANCE DISTRIBUTION AND PRESSURE MEASUREMENT IN THE COMPUTED FFR IMPACT OF RESISTANCE DISTRIBUTION AND PRESSURE MEASUREMENT IN THE COMPUTED FFR MODELLING HEMODYNAMICS WITH REAL PHYSIOLOGICAL CONDITIONS OF PATIENT-SPECIFIC CORONARIES MODELLING HEMODYNAMICS WITH REAL PHYSIOLOGICAL CONDITIONS OF PATIENT-SPECIFIC CORONARIES
Antonuccio, Maria Nicole	BioCardioLab, Fondazione Toscana “G. Monasterio”, Italy; Ecole des Mines de Saint-Etienne, France	FSI COMPUTATIONAL MODEL OF A PATIENT SPECIFIC AAA VALIDATED BY LED ILLUMINATED PIV
Antunes, Madalena	IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal	INFLUENCE OF THE TEAR PATTERN ON SHOULDER STABILITY AFTER ARTHROSCOPIC SUPERIOR CAPSULAR RECONSTRUCTION Presenter
Aparicio-Yuste, Raúl	Multiscale in Mechanical and Biological Engineering (M2BE), University of Zaragoza, Spain; Interfaculty Institute of Microbiology and Infection Medicine, Cluster of Excellence “Controlling Microbes to Fight Infections” (CMFI, EXC 2124), University of Tübingen, Germany	COMPUTATIONAL INSIGHTS INTO MECHANICAL CHANGES IN BACTERIALLY INFECTED CELL MONOLAYERS
Apolinar Fernández, Alejandro	Universidad de Sevilla	DATA-DRIVEN 3D TRACTION FORCE MICROSCOPY IN FIBRILLAR HYDROGELS
Appleyard, Richard	Faculty of Medicine, Health and Human Sciences, Macquarie University, Australia	VALIDATION OF A MUSCULOSKELTAL HUMAN SHOULDER MODEL DURING A FORWARD FLEXION MOTION
Arampatzis, Adamantios	Humboldt Universität zu Berlin, Germany	NEW AUTOMATED ALGORITHM FOR MUSCLE ARCHITECTURE EXTRACTION FROM B-MODE ULTRASOUND IMAGES
Arens, Jutta	Department of Biomechanical Engineering, Engineering Organ Support Technologies Group, University of Twente, Enschede, Netherlands	ANALYSIS OF THE EFFECT OF COMBINED EXTRACORPOREAL LUNG AND KIDNEY SUPPORT USING A CARDIOVASCULAR MODEL
Ariza Gracia, Miguel Ángel	ARTORG, University of Bern, Switzerland	PATIENT-SPECIFIC OPTO-MECHANICAL MODELLING OF PHOTOREFRACTIVE KERATECTOMY
Arjmand, Navid	Sharif University of Technology, Iran	PERFORMANCE OF TWO POSE ESTIMATION ALGORITHMS IN GAIT ANALYSIS AGAINST THE VICON REFERENCE SYSTEM
Armfield, Dylan	School of Mechanical and Materials Engineering, University College Dublin, Dublin, Ireland	COMPUTATIONAL MODELLING APPROACHES TO ASSESS THE IN VITRO PERFORMANCE OF A TAVR DEVICE
Arminio, Mariachiara	Politecnico di Torino, Italy	WALL DISTENSIBILITY MODERATELY AFFECTS WALL SHEAR STRESS TOPOLOGICAL SKELETON AT THE CAROTID BIFURCATION
Armour, Chloe	Imperial College London, United Kingdom	EFFECTS OF SHEAR STRESS-INDUCED THROMBUS BREAKDOWN ON THROMBOSIS IN AORTIC DISSECTION
Armour, Chlöe Harriet	Imperial College London, UK	DATA-DRIVEN GENERATION OF INLET VELOCITY PROFILES FOR CFD MODELLING IN THORACIC AORTIC ANEURYSMS PHENOMENOLOGICAL PREDICTION OF FALSE LUMEN THROMBOSIS IN TYPE B AORTIC DISSECTION
Armstrong, Aimee	The Heart Center, Nationwide Children’s Hospital, Columbus, Ohio, USA	THE REASONS FOR DIFFERENCES BETWEEN 2D AND 3D ECHOCARDIOGRAPHY STRAIN MEASUREMENTS
Arnold, Dirk	University Hospital of Jena, ENT department, Germany	KINETICS OF RAT LOCOMOTION NEGOTIATING ACTIVE PERTUBATIONS
Arnoux, Pierre-Jean	Laboratoire de Biomécanique Appliquée, UMRT 24, Marseille, France	AUTOMATIC REAL-TIME TOOL FOR THE PATIENT-SPECIFIC PERFORMANCE EVALUATION OF IMPLANT-SUPPORTED DENTAL REHABILITATION TREATMENT
Aronis, Georgios	TU Wien, Austria	A BIOMECHANICAL MODEL TO TEST THE EFFECTS OF A PASSIVE EXOSKELETON ON THE SHOULDER COMPLEX Presenter METABOLIC ANALYSIS OF A WEARABLE UPPER LIMB EXOSKELETON FOR OVERHEAD WORK Presenter
Arora, Hari	Swansea University, United Kingdom; ZCCE, Faculty of Science and Engineering, Swansea University, Wales, UK	CHARACTERISATION OF THE PHANTOM TISSUE MODELS FOR MEDICAL DEVICE TESTING AND SURGICAL TRAINING CHARACTERISATION OF THE PHANTOM TISSUE MODELS FOR MEDICAL DEVICE TESTING AND SURGICAL TRAINING DEEP RESIDUAL AMBIVALENT GRAPH CONVOLUTIONAL NETWORKS FOR BIOMARKER PREDICTION IN LARGE VESSEL NETWORKS DEVELOPMENT OF A HEAD ACCELERATION EVENT CLASSIFICATION ALGORITHM FOR FEMALE RUGBY UNION EFFECT OF AORTIC VALVE GEOMETRY ON LEAFLET STRAIN WITHIN A PHANTOM SILICONE AORTIC HEART VALVE DURING CLOSING. Effect Of Aortic Valve Geometry On Leaflet Strain Within A Phantom Silicone Aortic Heart Valve During Closing. IN SEARCH OF CARDIOVASCULAR BIOMARKERS FOR PRE-ECLAMPSIA PERSONALISED COMPUTATIONAL MODELS TO STUDY THE IMPACT OF COVID-19 LUNGS UNDER MECHANICAL VENTILATION TOMOGRAPHY IMAGING AND DIGITAL VOLUME CORRELATION OF THE LUNG DURING MECHANICAL VENTILATION Presenter
Arora, Rohit	Medical University Innsbruck, Austria	SENSOR-BASED CONTINUOUS ASSESSMENT OF POSTOPERATIVE SHOULDER ACTIVITY
Arsic, Branko	Bioengineering Research and Development Center (BioIRC), Serbia; Faculty of Science, University of Kragujevac, Serbia	3D MODELING OF CAROTID ARTERY AND PLAQUE PROGRESSION USING COUPLED AGENT BASED AND FINITE ELEMENT METHODS
Asbai-Ghoudan, Reduan	TECNUN/Universidad de Navarra, Spain	ENHANCING OSSEOINTEGRATION USING COMPLEX POROUS STRUCTURES Presenter
Asensio, Carlos	Valencia International University, Spain	DESIGN AND RAPID PROTOTYPING OF A NEW CRANIAL IMPLANT CONCEPT FOR CRANEOPLASTY
Ashkenazi, Amit	Technion - Israel Institute of Technology, Israel; Faculty of Mechanical Engineering, Technion – Israel Institute of Technology, Haifa 3200003, Israel	IDENTIFICATION OF TRANSVERSLY ISOTROPIC CONSTITUITIVE PARAMETERS USING IN-VIVO MACRO-INDENTATION METHODS Presenter MULTI-MODAL NUMERICAL-EXPERIMENTAL SETUP TO IMPROVE THE IDENTIFIABILITY OF THE MATERIAL PARAMETERS OF SOFT TISSUES Presenter
Aşık, Erkan	Avalanche Medical BV, Maastricht, The Netherlands	STUDY OF THE LOCATIONS AND MORPHOLOGY OF ISOLATED KNEE FOCAL CARTILAGE DEFECTS USING A STATISTICAL SHAPE MODELING APPROACH
Assenza, Marta	Medical Technology Laboratory, IRCCS Istituto Ortopedico Rizzoli, Italy	A CONTRAST-ENHANCED X-RAY IMAGING APPROACH FOR CHARACTERIZING ARTICULAR CARTILAGE
Athanasiou, Thanos	Imperial College London, UK	DATA-DRIVEN GENERATION OF INLET VELOCITY PROFILES FOR CFD MODELLING IN THORACIC AORTIC ANEURYSMS
Atia, Lior	Ben-Gurion university, Israel	A TOOL FOR STUDYING THE ROLE OF INTERCELLULAR STRESSES AND DYNAMIC CELL SHAPE MODULATIONS IN MECHANICAL INHIBITION OF CELL DIVISION
Attenborough, Ed	Attenborough Dental, United Kingdom	ACCURACY OF CAD-BASED AND CT-BASED FE MODELLING TO PREDICT THE FATIGUE BEHAVIOR OF POROUS TITANIUM DENTAL IMPLANTS
Attik, Nina	Univ Lyon - Claude Bernard Lyon 1, UMR CNRS 5615, Laboratoire des Multimatériaux et Interfaces, France; Univ Lyon, Université Claude Bernard Lyon 1, Faculté d’Odontologie, France	ELECTROSPUN POLYCAPROLACTONE 3D FIBROUS SCAFFOLD FOR HUMAN PERIODONTAL LIGAMENT CELLS MECHANOBIOLOGY
Audenino, Alberto Luigi	PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy.; PolitoBIOMed Lab, Politecnico di Torino, Torino (Italy)	STATISTICAL MODELS INFORMED BY DXA IMAGES SLIGHTLY OUTPERFORM T-SCORE IN THE PREDICTION OF HIP FRACTURE A METHODOLOGICAL APPROACH TO INTERPRET AND COMPARE THE VISCOELASTIC BEHAVIOR OF BIOLOGICAL TISSUES AND HYDROGELS BIOMIMETIC BIOREACTOR FOR AIR-LIQUID INTERFACE CULTURE - SKIN TISSUE ENGINEERING APPLICATION DESIGN, CHARACTERIZATION AND TESTING OF A PLATFORM FOR INVESTIGATING CELL RESPONSE TO CONTROLLED STRETCH EXPERIMENTAL COMPARISON OF PRESSURE PERFORMANCES IN DIFFERENT CPAP DELIVERY TECHNIQUES MIGRATION AND TRACTION FORCE CHARACTERIZATION OF PANCREATIC DUCTAL ADENOCARCINOMA CELLS ON STIFFNESS-TUNABLE SUBSTRATES AN EXHAUSTIVE TEST PROTOCOL FOR THE MECHANICAL CHARACTERIZATION OF SURGICAL MESHES ASSESSING THE EFFECT OF FIXATION LENGTH IN LUMBAR SPINE COMBINING RIGID AND FLEXIBLE BODY MODELING CFD SIMULATIONS OF THE CO2 REBREATHING IN DIFFERENT HELMET-LIKE INTERFACES FOR THE CPAP THERAPY DELIVERY EXPERIMENTAL STUDY ON DENTAL PROSTHESES RETRIEVAL TOOLS: REMOVAL EFFICIENCY AND POTENTIAL PATIENTS’ DISCOMFORT SAME OFFSET, DIFFERENT STABILITY: HOW HEAD LENGTH AFFECTS TAPER JUNCTION MICROMOTIONS IN TOTAL HIP ARTHROPLASTY
Auer, Simon	Laboratory for Biomechanics, OTH Regensburg, Germany	EVALUATION OF MARKERLESS MOTION CAPTURE USING MUSKULOSKELETAL MODELS Presenter
Augat, Peter	Institute for Biomechanics, BG Unfallklinik Murnau, Germany; Institute for Biomechanics, Paracelsus Medical University Salzburg, Austria; BG Unfallklinik Murnau gGmbH and Paracelsus Medical University Salzburg, Murnau, Germany	EFFECTS OF AN ACTIVE BACK-SUPPORTING EXOSKELETON ON KINEMATICS DURING LIFTING AND CARRYING LOADS VALIDATION OF OSTEOPOROTIC SYNTHETIC FEMORA – A MORE REALISTIC ALTERNATIVE TO EPOXY BONES?
Auguste, Stephane	Urgo Research, Innovation & Development, 21300, Chenôve, France	REDUCTION OF STRAIN CLUSTERS IN INJURED HEEL FINITE ELEMENT MODELS WITH A NEW PRESSURE ULCER DRESSING
Avril, Stéphane	Mines Saint Etienne, INSERM, SAINBIOSE U1059, F-42023, Saint-Étienne, France; Mines Saint-Etienne, University of Lyon, Inserm, Sainbiose U1059, France; Ecole des Mines de Saint-Etienne, France; Mines Saint-Etienne, Univ Jean Monnet Saint-Etienne, Inserm; Mines Saint-Étienne, France; Centre CIS, Mines Saint-Etienne, Université Jean Monnet Saint-Etienne, INSERM, SAINBIOSE U1059, F-42023 Saint-Etienne, France	AORTIC HEMODYNAMICS EVALUATION BASED ON REDUCED ORDER MODELS: EFFECT OF INLET CONDITIONS ASSESSMENT OF THE COMBINED EFFECTS OF VALVE PHENOTYPE AND ANEURYSM PROGRESSION ON ATAA HEMODYNAMICS CFD AND CSM MODELS OF THE ASCENDING THORACIC AORTA ANEURYSM WITH PATIENT SPECIFIC WALL DISPLACEMENT COMPARISON OF ZERO PRESSURE GEOMETRY AND PRESTRESS METHODOLOGIES IN CARDIOVASCULAR IN-SILICO ANALYSIS FROM MECHANOBIOLOGY OF AORTIC SMOOTH MUSCLE CELLS TO IMPROVED PROGNOSIS OF THORACIC AORTIC ANEURYSMS Presenter FSI COMPUTATIONAL MODEL OF A PATIENT SPECIFIC AAA VALIDATED BY LED ILLUMINATED PIV MACHINE LEARNING AND REDUCED ORDER MODELLING FOR THE SIMULATION OF BRAIDED STENT DEPLOYMENT MERGING 4D ULTRASOUND AND MODIFIED VIRTUAL FIELDS METHOD TO REGIONALLY CHARACTERIZE ABDOMINAL AORTIC ANEURYSMS OPTICAL COHERENCE TOMOGRAPHY (OCT) ASSOCIATED WITH CLEARING TECHNIQUE FOR MEASURING THE EVOLUTION AND DEGENERATION OF SKELETAL MUSCLE OPTICAL PARAMETERS REMODELING OF 3D MATERIALS VIA A COMBINATION OF THE HOMOGENIZED CONSTRAINED MIXTURE THEORY WITH PLASTICITY STENT-GRAFTS DERIVED FROM AUXETIC UNIT CELLS: NUMERICAL SIMULATION OF DEPLOYMENT INTO A CURVED ARTERY WHAT COLLAGEN HYDROGEL FOR OPTIMAL MECHANOBIOLOGY OF 3D ENCAPSULLATED SMOOTH MUSCLE CELLS? Presenter
Aw, Jensen	Attenborough Dental, United Kingdom	ACCURACY OF CAD-BASED AND CT-BASED FE MODELLING TO PREDICT THE FATIGUE BEHAVIOR OF POROUS TITANIUM DENTAL IMPLANTS
Awadalla, Maged	Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, South Australia, Australia	PRIMARY STABILITY OF CEMENTLESS TIBIAL TRAYS DURING STAIR DESCENT AND DEEP KNEE BEND: A MICRO-CT AND DVC ANALYSIS
Awasthi, Abhilash	Department of Applied Mechanics, Indian Institute of Technology Delhi, New Delhi, India	ROBUST AND ACCELERATED SUBZONE-BASED NONLINEAR INVERSION IN ELASTOGRAPHY Presenter ROBUST AND ACCELERATED SUBZONE-BASED NONLINEAR INVERSION IN ELASTOGRAPHY Presenter
Axelsson, Rebecca	Lund University, Sweden	INVESTIGATING THE EFFECT OF REDUCED LOAD ON RAT ACHILLES TENDONS VISCOELASTIC PROPERTIES: A FINITE ELEMENT STUDY Presenter
Axford, David T.	Faculty of Medicine, Health and Human Sciences, Macquarie University, Australia; Dept of Mechanical and Materials Engineering, Western University, Canada	VALIDATION OF A MUSCULOSKELTAL HUMAN SHOULDER MODEL DURING A FORWARD FLEXION MOTION
Ayechu Abendaño, Ada	TU Wien, Austria; Universidad de Zaragoza, Spain.	A BIOMECHANICAL MODEL TO TEST THE EFFECTS OF A PASSIVE EXOSKELETON ON THE SHOULDER COMPLEX
Azari, Fahimeh	Ku Leuven, Leuven, Belgium	QUANTITATIVE ASSESSMENT OF BONE MICROARCHITECTURE IN THE HUMAN KNEE USING PHOTON-COUNTING CT IS FEASIBLE Presenter QUANTITATIVE ASSESSMENT OF BONE MICROARCHITECTURE IN THE HUMAN KNEE USING PHOTON-COUNTING CT IS FEASIBLE Presenter
Azevedo, Clara	Hospital CUF Tejo, Portugal	INFLUENCE OF THE TEAR PATTERN ON SHOULDER STABILITY AFTER ARTHROSCOPIC SUPERIOR CAPSULAR RECONSTRUCTION
Azhang, Arash	Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran	INFLUENCE OF BONE SCREW CONFIGURATIONS ON BONE HEALING BIOMECHANICS USING LOCKING COMPRESSION PLATE FIXATION

Index of Authors