Index of Authors
A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding surname. Select the presentation in the right-hand column to access session and presentation details.
|
List Options: Authors and Sessions · Authors and Presentations
Author(s) | Organization(s) | Session |
P. van den Bergh, Joop | VieCuri Medical Center, Venlo, the Netherlands; Maastricht University, Maastricht, the Netherlands | Poster pitch video II (available online) Poster session II: Hard tissue biomechanics |
Padmos, Raymond | Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, the Netherlands | Poster session I: Cardiovascular biomechanics Presenter |
Paggi, Carlo Alberto | University of Twente, the Netherlands | ESB Student Award |
Paggiosi, Margaret | Department of Oncology and Metabolism University of Sheffield, UK. | Hard tissue biomechanics IV: Bone Strength |
Pahr, Dieter H. | TU Wien, Austria; Karl Landsteiner University of Health Sciences, Austria; Institute of Lightweight Design and Structural Biomechanics, TU Wien, AT; Division Biomechanics, Karl Landsteiner University of Health Sciences, AT; TU Vienna, Austria | Implants / orthotics / prosthetics / devices I: Fracture treatment Poster pitch video III (available online) Presenter Poster session III: Hard tissue biomechanics Presenter Hard tissue biomechanics II: Bone Tissue Scale Hard tissue biomechanics V: Bone remodelling and diseases Implants / orthotics / prosthetics / devices I: Fracture treatment |
Pailler-Mattei, Cyril | Laboratoire de Tribologie et Dynamique des Systèmes, CNRS UMR 5513, Université de Lyon, École Centrale de Lyon, France; Université de Lyon, Université Claude Bernard Lyon 1, ISPB- Faculté de Pharmacie | Patient-specific modelling I: Biomechanical tissue patient-specific modelling |
Pais, Ana | INEGI - Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal | Poster session II: AI / Data-driven modeling in biomechanics Presenter Poster session II: AI / Data-driven modeling in biomechanics Presenter |
Palanca, Marco | Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Bologna, Italy | Implants / orthotics / prosthetics / devices IV: Lower limb prostheses and orthoses Implants / orthotics / prosthetics / devices IV: Lower limb prostheses and orthoses Spine biomechanics II: Disorders Presenter Spine biomechanics II: Disorders Spine biomechanics IV: Biomechanics |
Palsson, Halldor | University of Iceland, Reykjavik, Iceland | Clinical and translational biomechanics / in silico clinical trials I: Digital Twins |
Palumbo, Maria Chiara | Politecnico di Milano, Italy | Computer aided diagnosis, planning, and surgery II: Cardiac and other surgeries |
Panagiotopoulou, Vasiliki C. | School of Mechanical Engineering, University of Patras, Greece; AO Research Institute Davos, Switzerland | Biomaterials II: Mechanical characterisation Ergonomics / occupational biomechanics / rehabilitation I |
Pandelani, Thanyani | Council for Scientific and Industrial Research | Poster session I: Tissue engineering Poster session II: Hard tissue biomechanics |
Pandini, Stefano | Department of Mechanical and Industrial Engineering, University of Brescia, Italy | Poster pitch video I (available online) Poster session I: Tissue engineering |
Pani, Martino | SMDE, University of Portsmouth, United Kingdom; School of Mechanical and Design Engineering, University of Portsmouth, UK | Advanced computing for biomechanics III: Bone fracture and repair Presenter Poster session II: Hard tissue biomechanics |
Panieraki, Argyro | School of Engineering, University of Birmingham, United Kingdom | Poster session I: 3D printing in biomedicine Presenter Poster session I: 3D printing in biomedicine Presenter |
Pankaj, Pankaj | Institute for Bioengineering, School of Engineering, The University of Edinburgh, UK | Advanced computing for biomechanics III: Bone fracture and repair Implants / orthotics / prosthetics / devices IV: Lower limb prostheses and orthoses Poster session II: Advanced computing for biomechanics |
Pannetier, Romain | Thuasne, BP243, 92307 Levallois-Perret cedex, France | Implants / orthotics / prosthetics / devices VI: Prosthetics and orthotics: Miscellaneous |
Panzeri, Davide | Univ. di Milano-Bicocca, Dipartimento di Fisica, Milan, Italy | Tissue engineering II: Applied tissue engineering |
Papadakis, George | Department of Aeronautics, Imperial College London, UK | Cardiovascular biomechanics VI: Aneurysms Poster session II: AI / Data-driven modeling in biomechanics |
Papadimitriou, Dimitri | UK National Institute for Health Research Imperial Biomedical Research Centre, Imperial College London and Imperial College Healthcare NHS Trust | Poster pitch video III (available online) Poster session III: Cardiovascular biomechanics |
Parajasingam, Thurgadevi | ETH Zurich, Zurich, Switzerland | Cellular and molecular biomechanics / mechanobiology III: Mechanobiology 3 |
Parente, Marco | Department of Mechanical Engineering, Faculty of Engineering, University of Porto, 4000-465 Porto, Portugal | Poster pitch video II (available online) Poster session II: Soft tissue biomechanics Poster session II: Spine biomechanics |
Parente, Marco | INEGI - Instituto de Ciência e Inovação em Engenharia Mecânica e Engenharia Industrial, Portugal | Soft tissue biomechanics V: Soft tissue mechanical characterization II |
Parietti, Cécile | ENT Department, University Hospital of Nancy, Nancy, France; Université de Lorraine, Ecole de Chirurgie Nancy-Lorraine, Faculté de Médne de Nancy,54500 Vandœuvre-lès-Nancy, Franceeci | Poster session I: Experimental biomechanics |
Parikh, Shaiv | Department of Biomedical Engineering, CARIM School for Cardiovascular Diseases, Maastricht University, The Netherlands | Cardiovascular biomechanics XI: Vascular models |
Park, Il-Jung | The Catholic University of Korea, South Korea | Poster session I: Musculoskeletal / joint biomechanics |
Parkhill, Andrew Mark | Department of Mechanical and Materials Engineering, Queen's University, Canada | Hard tissue biomechanics II: Bone Tissue Scale |
Parlayan, Onur | Faculty of Engineering and Natural Sciences, Mechatronics Engineering, Sabanci University,Turkiye | Poster session I: Tissue engineering |
Parmenter, Alissa Louise | University College London, United Kingdom | Experimental biomechanics I: Nano- and micro- tissue biomechanics Spine biomechanics IV: Biomechanics Presenter |
Pascaner, Ariel Fernando | DICAr, University of Pavia, Italy | Poster session III: Patient-specific modelling |
Pascoletti, Giulia | Department of Engineering, University of Perugia, Italy | Poster session I: Musculoskeletal / joint biomechanics Poster pitch video I (available online) |
Pasini, Chiara | Department of Mechanical and Industrial Engineering, University of Brescia, Italy | Poster pitch video I (available online) Presenter Poster session I: Tissue engineering Presenter |
Pasini, Margherita | Dept of Industrial Engineering, Alma Mater Studiorum – University of Bologna, Bologna, IT | Spine biomechanics IV: Biomechanics |
Pasquinet, Laurent | Urgo Research, Innovation & Development, 21300, Chenôve, France | Soft tissue biomechanics VI: Soft tissue mechanical characterization III |
Passier, Margaretha Maria | Eindhoven, University of Technology, Netherlands, The | Computational biology II: Computational biomechanics Presenter |
Pasta, Salvatore | University of Palermo, Italy | Implants / orthotics / prosthetics / devices VI: Prosthetics and orthotics: Miscellaneous Poster session II: Cardiovascular biomechanics Presenter |
Pastor, Tatjana | AO Research Institute, Switzerland | Implants / orthotics / prosthetics / devices I: Fracture treatment |
Pastorelli, Stefano | Politecnico di Torino, Italy | Musculoskeletal / joint biomechanics VI: Upper limb biomechanics |
Paulus, Julien | LAM - Motion Lab, University of Liège, Belgium | Poster session I: Sports biomechanics |
Pavan, Piero | Department of Industrial Engineering, University of Padova, Italy; Fondazione Istituto di Ricerca Pediatrica Città della Speranza, Padova, Italy | Biomaterials II: Mechanical characterisation Musculoskeletal / joint biomechanics V: Ligamentous effects |
Pavey, Lydia Ruth | University of Exeter, United Kingdom | Dental biomechanics Presenter |
Pawlikowski, Marek | Warsaw University of Technology, Poland | Implants / orthotics / prosthetics / devices I: Fracture treatment Presenter Poster pitch video III (available online) Poster session I: 3D printing in biomedicine Poster session III: Cardiovascular biomechanics Poster session III: Cardiovascular biomechanics Poster session III: Cellular and molecular biomechanics / mechanobiology |
Payan, Yohan | Univ. Grenoble Alpes, CNRS, UMR 5525, VetAgro Sup, Grenoble INP, TIMC, 38000 Grenoble, France | Soft tissue biomechanics VI: Soft tissue mechanical characterization III |
Payne, Stephen | National Taiwan University, Taiwan | Biofluids and transport III: Emerging topics 2 Presenter |
Payne, Stephen J. | Institute of Biomedical Engineering, Department of Engineering Science, University of Oxford, United Kingdom; Institute of Applied Mechanics, National Taiwan University, Taiwan | Computational biology II: Computational biomechanics |
Payne, Stephen John | National Taiwan University, Taiwan | Cardiovascular biomechanics VIII: CFD/FSI 2 Presenter Poster session III: Cardiovascular biomechanics Presenter Soft tissue biomechanics V: Soft tissue mechanical characterization II Presenter |
Paz, Alexander | University of Eastern Finland, Finland; Universidad del Valle, Colombia | Advanced computing for biomechanics I Presenter |
Peach, Sean M | East Carolina University, USA | Respiratory biomechanics I: CT imaging and in silico modelling |
Pederzani, Elia | Politecnico di Milano, Italy | Poster pitch video I (available online) Presenter Poster session I: Tissue engineering Presenter |
Pegolo, Elena | Dept of Information Engineering, University of Padova, Italy | Biomechanics of movement and posture III: Movement Biomechanics Methodology 1 Presenter Biomechanics of movement and posture V: Clinical Biomechanics - Upper limb & Methods Presenter |
Peham, Christian | Movement Science Group, Equine Surgery, Department for Companion Animals and Horses, University of Veterinary Medicine, Vienna; Department of Small Animals and Horses, University of Veterinary Medicine, Vienna, Austria | Biomechanics of movement and posture I: Neuro-mechanics and motor control Ergonomics / occupational biomechanics / rehabilitation II Poster session II: Biomechanics of movement and posture |
Peirlinck, Mathias | TU Delft, the Netherlands; Faculty of Mechanical, Maritime and Materials Engineering, Delft University of Technology, the Netherlands | Cardiovascular biomechanics XI: Vascular models Poster session I: Cardiovascular biomechanics |
Peitola, Joose Petrus Jussinpoika | University of Eastern Finland, Finland | Musculoskeletal / joint biomechanics I: Cartilage and contact mechanics Presenter |
Pekkan, Kerem | Koc University, Turkiye | Poster session I: Cardiovascular biomechanics |
Peña, Estefania | Aragón Institute of Engineering Research (I3A), University of Zaragoza; Biomedical Research Networking Center in Bioengineering, Biomaterials and Nanomedicine, Spain; University of Zaragoza, Spain | Poster session I: Cardiovascular biomechanics Poster session II: Cardiovascular biomechanics Presenter Poster session III: Cardiovascular biomechanics |
Peña, Juan A. | Department of Management and Manufacturing Engineering. University of Zaragoza, Spain; Aragón Institute of Engineering Research (I3A), University of Zaragoza | Poster session I: Cardiovascular biomechanics Presenter |
Peña Baquedano, Estefanía | University of Zaragoza, Spain | Poster session II: Cardiovascular biomechanics |
Peña Fernández, Marta | School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh, United Kingdom; Institute of Mechanical, Process and Energy Engineering, Heriot-Watt University, UK | Computational biology II: Computational biomechanics Presenter Hard tissue biomechanics II: Bone Tissue Scale Hard tissue biomechanics IV: Bone Strength Poster session II: Hard tissue biomechanics Presenter |
Peña Trabalon, Alejandro | UNIVERSITY OF MALAGA, Spain | Ergonomics / occupational biomechanics / rehabilitation I |
Peña-Trabalon, Alejandro | Clinical Biomechanics Laboratory of Andalusia (BIOCLINA), University of Malaga, Spain | Soft tissue biomechanics VI: Soft tissue mechanical characterization III Presenter |
Pennati, Giancarlo | LaBS - Dept. of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Italy; Department of Chemistry, Materials and Chemical Engineering "Giulio Natta" (CMIC), Politecnico di Milano | Cardiovascular biomechanics IX: Medical devices and treatments 2 Poster session III: Cardiovascular biomechanics Poster session III: Patient-specific modelling |
Perchiazzi, Gaetano | Uppsala University, Department of Surgical Sciences / Hedenstierna Laboratory, Uppsala, Sweden; Uppsala University Hospital, Department of Anesthesia / Operation and Intensive Care, Uppsala, Sweden; Uppsala University, Hedenstierna Laboratory, Uppsala, Sweden | Poster pitch video I (available online) Poster session I: Respiratory biomechanics Respiratory biomechanics I: CT imaging and in silico modelling |
Pérez, María Ángeles | Universidad de Zaragoza, Spain | Computer aided diagnosis, planning, and surgery I: Bone surgeries Poster session III: Computer aided diagnosis, planning, and surgery Presenter |
Pérez Alcántara, Pedro | Universidad de Sevilla | Cellular and molecular biomechanics / mechanobiology IV: Mechanobiology 4 |
Perez Anson, María Angeles | University of Zaragoza, Spain | Computer aided diagnosis, planning, and surgery I: Bone surgeries Presenter |
Perez Boerema, Fernando | KU Leuven, Belgium | Biomaterials II: Mechanical characterisation Presenter |
Perez de la Blanca, Ana | UNIVERSITY OF MALAGA, Spain | Ergonomics / occupational biomechanics / rehabilitation I |
Pérez Ruíz, Ana | University of Navarra (UNAV), Spain; Instituto de Investigación Sanitaria de Navarra (IdiSNA), Spain | Poster session III: Musculoskeletal / joint biomechanics |
Perez-Blanca, Ana | Clinical Biomechanics Laboratory of Andalusia (BIOCLINA), University of Malaga, Spain | Soft tissue biomechanics VI: Soft tissue mechanical characterization III |
Perić, Djordje | Zienkiewicz Centre for Computational Engineering, Faculty of Science and Engineering, Swansea University, Swansea, UK | Soft tissue biomechanics IV: Articular soft tissue mechanics |
Perilli, Egon | Medical Device Research Institute, College of Science and Engineering, Flinders University, Adelaide, South Australia, Australia | Hard tissue biomechanics I: Multiscale Tissue Mechanics |
Perreault, Eric J. | Northwestern University, USA; Shirley Ryan AbilityLab, USA | Patient-specific modelling III: Patient-specific modelling |
Perretta, Silvana | IRCAD France, Strasbourg, France | Patient-specific modelling III: Patient-specific modelling |
Perrier, Antoine | Univ. Grenoble Alpes, CNRS, UMR 5525, VetAgro Sup, Grenoble INP, TIMC, 38000 Grenoble, France; Sorbonne Université Médecine; Assistance publique Hôpitaux de Paris (APHP), Service de Diabétologie, Hôpital Pitié-Salpêtrière | Soft tissue biomechanics VI: Soft tissue mechanical characterization III |
Perrin, David | Predisurge, Saint-Étienne, France | Computer aided diagnosis, planning, and surgery II: Cardiac and other surgeries |
Perrot, Jean-Juc | Hôpital Nord, CHU de Saint-Etienne, France | Poster session III: Skin biomechanics |
Perroud, Olivier | LEM3-UMR-7239, CNRS, University of Lorraine, France | Poster session I: Biomaterials |
Persohn, Sylvain | École Nationale Supérieure d’Arts et Métiers, IBHGC-Institut de Biomécanique Humaine Georges Charpak, Paris, France | Soft tissue biomechanics V: Soft tissue mechanical characterization II |
Persson, Cecilia | Uppsala University, Sweden | Advanced computing for biomechanics III: Bone fracture and repair Poster session II: Spine biomechanics |
Persson, Irma Mahmutovic | Lund University, Faculty of Medicine / Lund Biomedical Imaging Centre, Lund, Sweden | Poster pitch video I (available online) |
Perteghella, Sara | University of Pavia, Italy | 3D printing in biomedicine I |
Pešek, Jiří | Inria (Saclay IdF), France | Biofluids and transport III: Emerging topics 2 |
Pesenti, Alessia | Politecnico di Milano, Italy | Sports biomechanics II |
Peskin, Bezalel | Rambam medical center, Department of Orthopaedics, Haifa, Israel | Biomechanics of movement and posture II: Clinical Biomechanics - Knee Sports biomechanics II |
Petrie, Freja J. | 2Applied Sports, Technology, Exercise and Medicine Research Centre (A-STEM), Swansea University, Wales, UK | Impact / injury biomechanics |
Petrini, Lorenza | Dept. of Civil and Environmental Engineering, Politecnico di Milano, Milan, Italy | Cardiovascular biomechanics IX: Medical devices and treatments 2 Poster session III: Cardiovascular biomechanics Poster session III: Patient-specific modelling |
Petrini, Paola | Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy | Poster session I: 3D printing in biomedicine |
Petrucci, Maila | University of Bologna, Italy; Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy | Implants / orthotics / prosthetics / devices II: Joint prosthetics: hip Presenter |
Pettenuzzo, Sofia | Univeristy of Padova, Italy | Poster session III: Skin biomechanics |
Peyrin, Françoise | Université de Lyon, INSA Lyon, Université Claude Bernard Lyon 1, UJM-Saint Etienne, CNRS UMR 5220, Inserm U1294, CREATIS, Lyon, France | Poster session II: Hard tissue biomechanics |
Piatkowska, Weronika | Dept of Information Engineering, University of Padua, Padua, Italy | Musculoskeletal / joint biomechanics VIII: Muscle, modelling, in vivo measurement |
Pica, Andrada | Sapienza University of Rome, Italy; University of Sassari, Italy; Department of Mechanical and Aerospace Engineering, “Sapienza” University of Rome, Italy | Poster pitch video III (available online) Presenter Poster session III: Cellular and molecular biomechanics / mechanobiology Presenter |
Piccinini, Luigi | IRCCS Eugenio Medea, Italy | Sports biomechanics II |
Pichler, Lieselotte | University Hospital LMU Munich, Germany | Experimental biomechanics II: Tissue mechanics and novel methods |
Piella, Gemma | BCN MedTech, Barcelona, Spain; Universitat Pompeu Fabra, Spain | ESB Student Award Spine biomechanics III: Mechanobiology and biomechanics |
Pierantoni, Maria | Lund University, Sweden | Soft tissue biomechanics II: Fibril & tendon mechanics |
Pierrat, Baptiste | École des Mines de Saint-Étienne, France; Mines Saint-Étienne, Univ Jean Monnet, INSERM, U 1059 Sainbiose, 42023, Saint-Étienne, France | Computer aided diagnosis, planning, and surgery II: Cardiac and other surgeries Poster session I: Experimental biomechanics Poster session III: Skin biomechanics |
Pierron, Fabrice | University of Southampton, United Kingdom | Poster session I: Experimental biomechanics Poster session II: Cellular and molecular biomechanics / mechanobiology |
Piersanti, Roberto | Politecnico di Milano, Italy | Cardiovascular biomechanics VII: Cardiac mechanics Presenter |
Pierscionek, Barbara | Anglia Ruskin University, United Kingdom | Ocular biomechanics Presenter |
Piet, Judith | KU Leuven, Belgium | Hard tissue biomechanics I: Multiscale Tissue Mechanics Presenter |
Pietschmann, Matthias F. | University Hospital LMU Munich, Germany; OrthoPraxis Oberhaching, Germany | Experimental biomechanics II: Tissue mechanics and novel methods |
Pillet, Hélène | Institut de Biomecanique Humaine Georges Charpak, Arts et Metiers Sciences et Technologies, France | Poster session II: Implants / orthotics / prosthetics / devices |
Pina, Estela | Aragón Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza | Poster session II: Cardiovascular biomechanics |
Pinedo, Maitane | UCL Great Ormond Street Institute of Child Health | Hard tissue biomechanics IV: Bone Strength |
Piñero, Janet | IMIM, Spain | Spine biomechanics III: Mechanobiology and biomechanics |
Pinoli, Pietro | DEIB, Department of Electronics, Information and Bioengineering, Politecnico di Milano, Milano, Italy | Poster session III: Cellular and molecular biomechanics / mechanobiology |
Pinto, Isabel | Seara, S.A., Vila Nova de Famalicão, Portugal | Soft tissue biomechanics I: Soft tissue mechanical characterization I |
Pinto, Sónia I.S. | Engineering Faculty, University of Porto, Porto, Portugal; Institute of Science and Innovation in Mechanical and Industrial Engineering (LAETA-INEGI), Portugal | Poster pitch video I (available online) Poster pitch video III (available online) Poster pitch video III (available online) Presenter Poster session I: Biomedical imaging Poster session III: Patient-specific modelling Presenter Poster session III: Patient-specific modelling |
Pioletti, Dominique | EPFL, Switzerland | AI / Data-driven modelling in biomechanics III: Musculoskeletal System |
Pires, Tiago H. V. | IDMEC, Instituto Superior Técnico, Universidade de Lisboa, Portugal | Poster session I: Tissue engineering Presenter |
Pirini, Paola | Department of Civil Environmental and Architectural Engineering, University of Padova, Italy | Clinical and translational biomechanics / in silico clinical trials II: In Silico Trials |
Pirola, Selene | Delft University of Technology, The Netherlands; Imperial College London, UK | Biofluids and transport III: Emerging topics 2 Presenter |
Piscione, Julien | Fédération Française de Rugby, France | Sports biomechanics I |
Piszczatowski, Szczepan | Bialystok University of Technology, Poland | Poster session I: Biomechanics of movement and posture |
Pita Miguélez, Inés | Laboratoire GEMTEX, ENSAIT Roubaix - Université de Lille, France | Poster session III: Implants / orthotics / prosthetics / devices Presenter |
Piumini, Giulia | University of Twente, The Netherlands | AI / Data-driven modelling in biomechanics IV: Cardiovascular System |
Pivonka, Peter | Queensland University of Technology, Australia; School of Mechanical, Medical and Process Engineering, Queensland University of Technology, Brisbane, Australia | Hard tissue biomechanics V: Bone remodelling and diseases Poster session II: Spine biomechanics |
Pižorn, Jaka | Institute for Biomechanics, ETH Zurich, Switzerland; | 3D printing in biomedicine II Presenter |
Pizzocaro, Serena | Department of Research and Development, LUNEX International University, Differdange, Luxembourg; Department of Electrical, Computer and Biomedical Engineering, University of Pavia, Pavia, Italy | AI / Data-driven modelling in biomechanics II: Gait Biomechanics of movement and posture IV: Movement Biomechanics Methodology 2 Presenter |
Planus, Emmanuelle | Institute for Advanced Biosciences, France | ESB Student Award |
Plesec, Vasja | University of Maribor, Faculty of Mechanical Engineering, Slovenia | Poster session II: Implants / orthotics / prosthetics / devices Presenter |
Plet, Guillaume | Laboratoire de Tribologie et Dynamique des Systèmes, CNRS UMR 5513, Université de Lyon, École Centrale de Lyon, France | Patient-specific modelling I: Biomechanical tissue patient-specific modelling |
Ploeg, Heidi-Lynn | Queen's University, Canada; Department of Mechanical and Materials Engineering, Queen's University, Canada | Dental biomechanics Hard tissue biomechanics II: Bone Tissue Scale Poster session I: Dental biomechanics |
Po, Chrystelle | Laboratoire ICube, CNRS UMR 7357, Strasbourg, France | Poster session I: Biomaterials |
Poeze, Martijn | Maastricht University Medical Center, Netherlands, The | Hard tissue biomechanics IV: Bone Strength |
Poh, Patrina. S.P. | Center for Musculoskeletal Biomechanics and Regeneration (Julius Wolff Institute), Charité – Universitätsmedizin Berlin, Berlin, Germany, Germany | Cellular and molecular biomechanics / mechanobiology III: Mechanobiology 3 |
Pohlemann, Tim | Saarland University Hospital - Clinic for Trauma, Hand and Reconstructive Surgery, Germany | Poster session I: Experimental biomechanics |
Pohlemann, Tim | Department of Trauma, Hand and Reconstructive Surgery, Saarland University, Germany | Poster session III: Cellular and molecular biomechanics / mechanobiology |
Poirier, Aglaé | University of Ottawa, Canada; Université de Technologie de Compiègne, France | Biomechanics of movement and posture II: Clinical Biomechanics - Knee |
Pokorni, Agoston | In Silico Biomechanics Laboratory, National Center for Spinal Disorders, Budapest, Hungary; Semmelweis University, Budapest, Hungary | Patient-specific modelling IV: Bone patient-specific modelling Spine biomechanics I: Devices |
Poletti, Gianluca | LaBS - Dept. of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, Italy | Cardiovascular biomechanics IX: Medical devices and treatments 2 Presenter |
Polli, Roberta | Dept of Women and Child Health - University of Padova, Italy | Musculoskeletal / joint biomechanics VIII: Muscle, modelling, in vivo measurement |
Polzer, Hans | LMU University Hospital Munich, Germany | Biomechanics of movement and posture IV: Movement Biomechanics Methodology 2 |
Ponomarev, Igor | fzmb GmbH, Germany | Poster session I: Tissue engineering |
Pontone, Gianluca | Centro Cardiologico Monzino, Italy | Poster session II: AI / Data-driven modeling in biomechanics |
Popescu, Andreea Bianca | Transilvania University of Brasov, Romania; Siemens SRL, Romania | Poster session II: AI / Data-driven modeling in biomechanics |
Popp, Claudia | Swansea University, United Kingdom | Biofluids and transport III: Emerging topics 2 |
Porojan, Liliana | “Victor Babeș” University of Medicine and Pharmacy, Romania; 1Department of Dental Prostheses Technology (Dental Technology), Center for Advanced Technologies in Dental Prosthodontics, Faculty of Dental Medicine, “Victor Babeș” University of Medicine and Pharmacy Timișoara, Eftimie Murgu Sq. No. 2, 300041 | Poster session I: Biomaterials Presenter Poster session I: Biomaterials |
Porojan, Sorin Daniel | “Victor Babeș” University of Medicine and Pharmacy, Romania; Department of Oral Rehabilitation (Dental Technique), Center for Advanced Technologies in Dental Prosthodontics,Faculty of Dental Medicine, “Victor Babeș” University of Medicine and Pharmacy Timișoara, Eftimie Murgu Sq. No. 2, 300041 Timișoara, Romania | Poster session I: Biomaterials Poster session I: Biomaterials |
Portero-Tresserra, Marta | Universitat Autònoma de Barcelona | Poster session I: Respiratory biomechanics |
Porzionato, Andrea | Department of Neurosciences, Section of Human Anatomy, University of Padova, Italy | Biomaterials II: Mechanical characterisation |
Positano, Vincenzo | BioCardioLab - Fondazione Toscana Gabriele Monasterio, Italy | Poster pitch video I (available online) Poster session I: Biomedical imaging |
Post, Corine | Radboud University Medical Center, Orthopaedic Research Laboratory, Nijmegen, The Netherlands | Implants / orthotics / prosthetics / devices III: Joint prosthetics: knee and shoulder Presenter |
Postolka, Barbara | Laboratory for Movement Biomechanics, ETH Zurich, Switzerland | Musculoskeletal / joint biomechanics VII: Biomechanical measurement and modelling Musculoskeletal / joint biomechanics VII: Biomechanical measurement and modelling |
Potere, Federica | Laboratory of Biological Structure Mechanics (LaBS), Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy | Poster session I: 3D printing in biomedicine Presenter |
Potra, Robert | Faculty of Medicine, Health and Human Sciences, Macquarie University, Australia | Poster session I: Musculoskeletal / joint biomechanics |
Pouch, Alison | University of Pennsylvania, United States of America | Cardiovascular biomechanics IV: Heart valves |
Poudrel, Anne-Sophie | CNRS, MSME UMR CNRS 8208, France | Soft tissue biomechanics IV: Articular soft tissue mechanics |
Poujade, Thibault | Newclip Technics, France | Computer aided diagnosis, planning, and surgery I: Bone surgeries |
Powell, David R. L. | ZCCE, Faculty of Science and Engineering, Swansea University, Wales, UK; 2Applied Sports, Technology, Exercise and Medicine Research Centre (A-STEM), Swansea University, Wales, UK | Impact / injury biomechanics Presenter |
Pozzuoli, Assunta | Univeristy of Padova, Italy; Orthopedics and Orthopedic Oncology, DiSCOG, University of Padova, Italy | Poster session III: Skin biomechanics Soft tissue biomechanics VI: Soft tissue mechanical characterization III |
Prado Novoa, Maria | UNIVERSITY OF MALAGA, Spain | Ergonomics / occupational biomechanics / rehabilitation I |
Prado-Novoa, Maria | Clinical Biomechanics Laboratory of Andalusia (BIOCLINA), University of Malaga, Spain | Soft tissue biomechanics VI: Soft tissue mechanical characterization III |
Pramotton, Francesca | EMPA, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland | Skin biomechanics |
Pranger, Melanie | Gottfried Schatz Research Center, Medical University Graz, Austria | Cardiovascular biomechanics IX: Medical devices and treatments 2 |
Prasad, Rajan | Khalifa University, United Arab Emirates | Poster session II: Biomechanics of movement and posture Poster session II: Biomechanics of movement and posture Presenter |
Pratesi, Federico | University of Pisa, Italy | Biomaterials I: Polymers |
Praveen, Anitha D. | Singapore ETH Centre, Singapore | Clinical and translational biomechanics / in silico clinical trials I: Digital Twins Presenter |
Presles, Benoit | ICMUB, University of Burgundy, Dijon, France | Cardiovascular biomechanics X: Material characterization Poster session I: Cardiovascular biomechanics |
Pretterklieber, Michael | Division of macroscopical and clinical Anatomy Medical University of Graz, Graz, Austria | Hard tissue biomechanics V: Bone remodelling and diseases |
Prévost, Sylvain | Beamline ID02, European Synchrotron Radiation Facility, Grenoble, France | Experimental biomechanics I: Nano- and micro- tissue biomechanics |
Primo, Luca | Department of Oncology, University of Torino, Italy | Soft tissue biomechanics I: Soft tissue mechanical characterization I |
Princelle, Domitille | Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Italy; Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Italy | Biomechanics of movement and posture III: Movement Biomechanics Methodology 1 Clinical and translational biomechanics / in silico clinical trials II: In Silico Trials Clinical and translational biomechanics / in silico clinical trials II: In Silico Trials |
Pritchard, Thomas John | Swansea University, United Kingdom | Poster pitch video III (available online) Poster session III: Cardiovascular biomechanics Presenter Poster session III: Skin biomechanics Poster pitch video III (available online) Presenter |
Prusa, Gwendolin | University Hospital, LMU Munich, Germany | Poster session I: Soft tissue biomechanics |
Puente Reyna, Ana Laura | Aesculap AG, Research & Development, Tuttlingen, Germany | Implants / orthotics / prosthetics / devices V: Joint prosthetics: knee Presenter |
Puértolas, Sergio | Universidad de Zaragoza, Spain; Aragón Institute for engineering Research | Poster session III: Computational biology |
Pukaluk, Anna | Institute of Biomechanics, Graz University of Technology, Austria | Cardiovascular biomechanics III: Growth and remodelling Presenter Soft tissue biomechanics IV: Articular soft tissue mechanics |
Pumberger, Matthias | Centrum für Muskuloskeletale Chirurgie, Charité – Universitätsmedizin Berlin, Germany | Poster session II: Spine biomechanics Spine biomechanics I: Devices |
Punt, M. | Utrecht University of applied sciences, The Netherlands | Poster session II: Biomechanics of movement and posture |
Putame, Giovanni | Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy; PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy | Implants / orthotics / prosthetics / devices II: Joint prosthetics: hip Poster session II: Spine biomechanics Respiratory biomechanics II: Monitoring and care Respiratory biomechanics II: Monitoring and care Tissue engineering III: Mechanics and tissue engineering Presenter |