Conference Agenda

9:30 - 9:42
ID: 429

TOMOSAXS: MULTIMODAL VOLUMETRIC ANALYSIS OF COLLAGEN NANO-TO-MICROSTRUCTURE

E. Newham¹, A. Parmenter², C. Disney³, N. J. Terrill³, H. Deyhle³, P. D Lee², H. S Gupta¹

¹Queen Mary University of London, United Kingdom; ²University College London, United Kingdom; ³Diamond Light Source, United Kingdom

9:42 - 9:54
ID: 606

AN INTEGRATED FRAMEWORK FOR EVALUATING MECHANICAL PROPERTIES AND STRUCTURE OF ARTICULAR CARTILAGE

M. Berni¹, C. Golini², C. Testa², L. Brizi², N. F. Lopomo³, M. Baleani¹

¹IRCCS Istituto Ortopedico Rizzoli, Medical Technology Laboratory, Italy; ²University of Bologna, Department of Physics and Astronomy, Italy; ³University of Brescia, Department of Information Engineering, Italy

9:54 - 10:06
ID: 643

CYCLIC LOADING OF HEALTHY AND DEGRADED CARTILAGE AND THE 3D COLLAGEN FIBRILLAR RESPONSE

S. R. Inamdar¹, S. Prévost², N. Terrill³, M. Knight¹, H. Gupta¹

¹Queen Mary University of London, United Kingdom; ²Beamline ID02, European Synchrotron Radiation Facility, Grenoble, France; ³Diamond Light Source, Harwell Science and Innovation Campus, Harwell, UK

10:06 - 10:18
ID: 731

MECHANICAL CHARACTERISATION OF LOWER LIMB VASCULATURE IN DETERMINING AUTOGRAFT SUITABILITY FOR PERIPHERAL ARTERIAL DISEASE BYPASS SURGERIES

C. McCarthy¹, K. L McKevitt¹, J. M Allardyce¹, K. D McGourty¹, F. C Leahy², E. G Kavanagh², M. A Moloney², M. T Walsh¹, J. J E Mulvihill¹

¹Bernal Institute, University of Limerick, Limerick, Ireland; ²University Hospital Limerick, Limerick, Ireland

10:18 - 10:30
ID: 962

NANOSCALE STRUCTURAL CHANGES IN BONE CARTILAGE UNIT SUBJECTED TO COMPRESSIVE LOADS

W. Badar¹, O. N Brooker¹, N. J Terrill², T. Snow², P. Fratzl³, M. M Knight¹, H. S Gupta¹

¹School of Engineering and Materials Science, Queen Mary University of London, London,UK; ²Harwell Science and Innovation Campus, Diamond Light Source, Harwell, UK; ³Department of Biomaterials, Max-Planck-Institute of Colloids and Interfaces, Potsdam, Germany

11:00 - 11:12
ID: 288

DYNAMIC TENSILE CHARACTERIZATION OF PORCINE BRONCHI

P. Yeswanth, A. Chawla, N. Datla

Indian institute of Technology Delhi, India

11:12 - 11:24
ID: 948

MEASUREMENTS OF THE MECHANICAL PROPERTIES OF SKELETAL MUSCLE BY ULTRASONIC ELASTOGRAPHY AND SHEARING TESTS

P. LUBIN, M. ZIDI

Bioengineering, Tissues and Neuroplasticity, UR 7377, University of Paris-Est Créteil, Faculté de Santé, EPISEN, Créteil, France

11:24 - 11:36
ID: 361

IN-SITU DETERMINATION OF SPATIAL STRAIN MAPS IN PORCINE GROWTH PLATES BASED ON MRI LOADING EXPERIMENTS

J. Schwer¹, L. Hucke², V. Rasche³, A. Wittek², A. M. Seitz¹

¹Institute of Orthopaedic Research and Biomechanics, Centre for Trauma Research Ulm, Ulm University Medical Centre, Ulm, Germany; ²Personalized Biomedical Engineering Lab, Frankfurt University of Applied Sciences, Frankfurt am Main, Germany; ³Experimental Cardiovascular Imaging, Ulm University Medical Centre, Ulm, Germany

11:36 - 11:48
ID: 399

EFFECT OF HUMERAL ROTATION ON ROTATOR CUFF STRAIN, LOADING AND KINEMATICS: AN IN-VITRO STUDY

I. Santos¹, L. Pichler¹, C. Thorwächter¹, M. F. Pietschmann^1,2, M. Tauber³, P. E. Müller¹

¹University Hospital LMU Munich, Germany; ²OrthoPraxis Oberhaching, Germany; ³ATOS Clinic Munich, Germany

11:48 - 12:00
ID: 253

MULTIDIC AND DUODIC: OPEN-SOURCE SOFTWARE FOR 3D DIGITAL IMAGE CORRELATION AND THEIR APPLICATIONS IN BIOMECHANICS

D. Solav

Technion - Israel Institute of Technology, Israel

12:00 - 12:12
ID: 310

IN VITRO CHARACTERIZATION OF LOAD TRANSFER IN CERVICAL DISC REPLACEMENT ARTHROPLASTY

A. Ramos¹, G. Costa², M. Mesnard³

¹University of Aveiro, Portugal; ²University of Aveiro; ³University of Bordeaux

15:45 - 15:57
ID: 182

VALIDATION OF OSTEOPOROTIC SYNTHETIC FEMORA – A MORE REALISTIC ALTERNATIVE TO EPOXY BONES?

M. Hollensteiner, S. Sandriesser, P. Augat

BG Unfallklinik Murnau gGmbH and Paracelsus Medical University Salzburg, Murnau, Germany

15:57 - 16:09
ID: 247

AN EXHAUSTIVE TEST PROTOCOL FOR THE MECHANICAL CHARACTERIZATION OF SURGICAL MESHES

V. Civilini^1,2, V. Giacalone^1,2, A. L. Audenino^1,2, M. Terzini^1,2

¹PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy; ²Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy

16:09 - 16:21
ID: 364

WHAT DO SURGEONS HEAR AND FEEL WHEN BREACHING CORTICAL WALLS AND HOW DO BREACHES EFFECT SCREW PURCHASE?

T. Lange^1,2, M. P. Russo^1,2,3, J. J. Costi^1,2,3, K. J. Reynolds^1,2

¹College of Science and Engineering; Flinders University, Australia; ²Medical Device Research Institute (MDRI); ³Biomechanics and Implants Research Group

16:21 - 16:33
ID: 443

IMAGING AND MECHANICAL CHARACTERISATION OF HUMAN BLOOD CLOT ANALOGUES WITH DIFFERENT COMPOSITIONS AND DEGREES OF CONTRACTION

R. Cahalane¹, J. Cruts¹, A. Rachid², K. van Gaalen¹, H. van Beusekom¹, M. de Maat¹, M. Dijkshoorn¹, N. Boodt¹, A. van der Lugt¹, F. Gijsen^1,3

¹Erasmus Medical Center, the Netherlands; ²Eindhoven University of Technology, the Netherlands; ³Delft University of Technology, the Netherlands

16:33 - 16:45
ID: 519

CHARACTERIZING PORO-VISCOELASTIC MATERIAL PROPERTIES OF BRAIN TISSUE-MIMICKING HYDROGELS

M. P. Kainz¹, A. Greiner², J. Hinrichsen², D. Kolb^3,4, E. Comellas⁵, P. Steinmann^2,6, S. Budday², M. Terzano¹, G. A. Holzapfel^1,7

¹Institute of Biomechanics, Graz University of Technology, Austria; ²Department of Mechanical Engineering, Institute of Applied Mechanics, FAU Erlangen-Nürnberg, Germany; ³Core Facility Ultrastructure Analysis, Center for Medical Research, Medical University of Graz, Austria; ⁴Division of Cell Biology, Histology and Embryology, Gottfried Schatz Research Center, Medical University of Graz, Austria; ⁵Serra Húnter Fellow, Department of Physics, Universitat Politécnica de Catalunya (UPC), Spain; ⁶Glasgow Computational Engineering Centre, University of Glasgow, United Kingdom; ⁷Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), Norway

17:00 - 17:12
ID: 176

THE GAPPING BEHAVIOUR OF THE MENISCUS VARIES ACCORDING TO THE TEAR TYPE

M. Sukopp¹, J. Frey¹, M. Kalbitz², A. Ignatius¹, A. M. Seitz¹

¹Institute of Orthopaedic Research and Biomechanics, Ulm University Medical Centre, Germany; ²Department of Trauma and Orthopedic Surgery, University Hospital Erlangen, Germany

17:12 - 17:24
ID: 348

PATELLA DESIGN AND ISOLATED EFFECTS OF PATELLAR RESURFACING IN TOTAL KNEE ARTHROPLASTY

A. Sauer^1,2, C. Thorwaechter², I. Dupraz¹, A. Maas^1,2, A. Steinbrueck¹, T. M. Grupp^1,2, M. Woiczinski¹

¹Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital, LMU Munich; ²Aesculap AG, Research and Development, Am Aesculap-Platz, 78532 Tuttlingen, Germany

17:24 - 17:36
ID: 605

HOW WELL DOES A NEW DEVELOPED PIVOT TKA RESTORE THE NATIVE KINEMATICS: A CADAVERIC STUDY

C. Thorwächter¹, B. Richter², B. Altermann², A. Bollinger², H. Windhagen³, B. Holzapfel¹, P. Müller¹, T. Grupp², M. Woiczinski¹

¹Musculoskeletal University Center Munich (MUM), Ludwig Maximilian University of Munich (LMU), Germany; ²Aesculap AG, Research and Development, Germany; ³Department of Orthopaedic Surgery at Diakovere Annastift, Hannover Medical School, Hannover, Germany

17:36 - 17:48
ID: 719

INFLUENCE OF BIOMECHANICAL LOADING ON THE PHYSICAL BEHAVIOR OF A HYDROGEL AFTER INJECTION INTO NATIVE HUMAN KNEES

S. Krüger¹, S. A. Brendle^1,2, K. Benz³, C. Merckle¹, T. M. Grupp^1,2

¹Aesculap AG, Tuttlingen, Germany; ²Department of Orthopaedic and Trauma Surgery, Musculoskeletal University Center Munich (MUM), Campus Grosshadern, LMU Munich, Munich, Germany; ³Tetec AG, Reutlingen, Germany

17:48 - 18:00
ID: 730

USE OF AN INDUSTRIAL ROBOT TO RECORD HUMAN KNEE KINEMATICS IN VITRO - EVALUATION OF THE TEST METHOD

M. Nusser¹, L. Kiener¹, A. Gomez¹, G. Tschupp²

¹ZHAW Zürich, Switzerland; ²Mathys a company of enovis

9:30 - 9:42
ID: 408

FRACTURE MANAGEMENT STRATEGIES INFLUENCE THE FRACTURE HEMATOMA PROTEOME AFTER MULTIPLE TRAUMA.

C. Kuik¹, R. V. M. Groven^2,3, J. Greven⁴, Ü. Mert⁴, F. G. Bouwman⁵, M. Huber-Lang⁶, F. Hildebrand⁴, T. Blokhuis³, M. van Griensven², B. Cillero-Pastor^1,2

¹Maastricht Multimodal Molecular Imaging (M4I) Institute, Division of Imaging Mass Spectrometry, Maastricht University, Maastricht, The Netherlands; ²Department of Cell Biology-Inspired Tissue Engineering, MERLN Institute for Technology-Inspired Regenerative Medicine, Maastricht University, Maastricht, The Netherlands; ³Division of Trauma Surgery, Department of Surgery, Maastricht University Medical Center+, Maastricht, The Netherlands; ⁴Department of Orthopaedics, Trauma and Reconstructive Surgery, University Hospital RWTH Aachen, Aachen, Germany.; ⁵NUTRIM, School for Nutrition and Translational Research in Metabolism, Maastricht University, Maastricht, the Netherlands.; ⁶Institute of Clinical and Experimental Trauma Immunology, University Hospital Ulm, Ulm, Germany.

9:42 - 9:54
ID: 859

COMPUTATIONAL MODELING FOR EVALUATING THE EFFECTIVENESS OF PROTECTIVE PLATES IN NON-PENETRATING BALLISTIC IMPACTS

M. Lustig¹, Y. Epstein², A. Gefen¹

¹Department of Biomedical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv, Israel; ²Sackler Faculty of Medicine, Tel Aviv University, Tel Aviv, Israel

9:54 - 10:06
ID: 411

A MUSCLE MODEL FOR INJURY SIMULATION

M. Millard^1,2, F. Kempter², J. Fehr², N. Stutzig¹, T. Siebert¹

¹Institute of Sport Science, University of Stuttgart, Allmandring 28, 70569 Stuttgart, Germany; ²Institute of Engineering and Computational Mechanics, Pfaffenwaldring 9, 70569 Stuttgart, Germany

10:06 - 10:18
ID: 806

CERVICAL MUSCLE REFLEXES DURING LATERAL ACCELERATIONS

M. Millard^1,2, S. Hunger¹, L. Bross¹, J. Fehr², C. Holzapfel³, N. Stutzig¹, T. Siebert¹

¹Institute of Sport Science, University of Stuttgart, Allmandring 28, 70569 Stuttgart, Germany; ²Institute of Engineering and Computational Mechanics, Pfaffenwaldring 9, 70569 Stuttgart, Germany; ³FKFS, Pfaffenwaldring 12, 70569 Stuttgart, Germany

10:18 - 10:30
ID: 894

DEVELOPMENT OF A HEAD ACCELERATION EVENT CLASSIFICATION ALGORITHM FOR FEMALE RUGBY UNION

D. R. L. Powell^1,2, F. J. Petrie², P. D. Docherty^3,4, H. Arora¹, E. M. P. Williams²

¹ZCCE, Faculty of Science and Engineering, Swansea University, Wales, UK; ²2Applied Sports, Technology, Exercise and Medicine Research Centre (A-STEM), Swansea University, Wales, UK; ³3Department of Mechanical Engineering, University of Canterbury, Christchurch, New Zealand; ⁴Institute for Technical Medicine (ITeM), Furtwangen University, Villingen Schwenningen, Germany

11:00 - 11:12
ID: 214

PREDICTION OF OVERLOADING FAILURE OF OSTEOSYNTHESIS PLATES USING VALIDATED FINITE ELEMENT SIMULATIONS

D. Mischler¹, A. Valenti^1,2, P. Varga¹

¹AO Research Institute Davos, Switzerland; ²University of Bern, Switzerland

11:12 - 11:24
ID: 266

TOWARDS UNBIASED AND ACCURATE SIMULATIONS OF SCREW-BONE CONSTRUCTS WITH HOMOGENIZED FE MODELS

A. Synek¹, L. Ortner¹, D. Pahr^1,2

¹TU Wien, Austria; ²Karl Landsteiner University of Health Sciences, Austria

11:24 - 11:36
ID: 393

SIMPLIFIED SCREW-BONE INTERFACE MODELS FOR COMPUTATIONALLY EFFICIENT µFE SIMULATIONS

P. Stefanek¹, D. H. Pahr^1,2, A. Synek¹

¹TU Vienna, Austria; ²Karl Landsteiner University of Health Sciences, Austria

11:36 - 11:48
ID: 430

FE ANALYSIS OF AN EXTERNAL STABILIZER APPLIED IN TREATMENT OF THE PROXIMAL PHALANX FRACTURE IN HORSES

M. Pawlikowski¹, K. Jankowski¹, B. Turek²

¹Warsaw University of Technology, Poland; ²Warsaw University of Life Sciences, Poland

11:48 - 12:00
ID: 321

DETERMINATION OF THE INTERNAL LOADS OF THE PROXIMAL PHALANX DURING REHABILITATION EXERCISES

P. Schwarzenberg¹, T. Colding-Rasmussen², D. J. Hutchinson³, J. San Jacinto Garcia³, V. Granskog⁴, T. Pastor¹, T. Weis², M. Malkoch³, C. Wong², P. Varga¹

¹AO Research Institute, Switzerland; ²RegionH, Denmark; ³KTH Royal Institute of Technology, Sweden; ⁴Biomedical Bonding AB, Sweden

12:00 - 12:12
ID: 251

DEVELOPMENT OF 3D PRINTED PATIENT-SPECIFIC SCAPHOID IMPLANT TO ACHIEVE CUSTOMISED SCAPHOID REPLACEMENT

S. L. Teng¹, F. Li¹, K. Y. Chung², A. Y. H. Chin¹, Y. R. Wong¹

¹Singapore General Hospital, Singapore; ²Temsek Polytechnic, Singapore

15:45 - 15:57
ID: 225

INFLUENCE OF ANISOTROPIC CORTICAL BONE PROPERTIES IN PERIPROSTHETIC HIP FRACTURES

Ö. Cebeci^1,2, D. Cronin³, M. Sämann⁴, S. Checa²

¹IAT Ingenieurgesellschaft für Automobiltechnik mbH; ²Julius Wolff Institute, Berlin Institute of Health (BIH); ³Department of Mechanical and Mechatronics Engineering, University of Waterloo; ⁴Biomechanics and Implant Technology Research Laboratory, Department of Orthopaedics, Rostock

15:57 - 16:09
ID: 436

COATINGS OSTEOINDUCTIVE EFFECT CALIBRATION IN ASEPTIC LOOSENING SIMULATION OF ANIMAL OSTEOINTEGRATION EXPERIMENT

S. Baroni^1,2, S. Oliviero^1,2, A. A. La Mattina^1,2, M. Viceconti^1,2

¹Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Italy; ²Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy

16:09 - 16:21
ID: 559

PATIENT-SPECIFIC FINITE ELEMENT MODEL FOR INTRAOPERATIVE FRACTURES PREDICTION WITH A COMMERCIAL DESIGN

M. Petrucci^1,2, A. A. La Mattina^1,2, C. Curreli^1,2, M. Viceconti^1,2

¹University of Bologna, Italy; ²Medical Technology Lab, IRCCS Istituto Ortopedico Rizzoli, Bologna, Italy

16:21 - 16:33
ID: 665

DISRUPTED LUBRICATION METHODOLOGY TO REPLICATE SQUEAKING ON CERAMIC ON CERAMIC HIP JOINT REPLACEMENTS

O. O'Dwyer Lancaster-Jones

DePuy Synthes

16:33 - 16:45
ID: 732

SAME OFFSET, DIFFERENT STABILITY: HOW HEAD LENGTH AFFECTS TAPER JUNCTION MICROMOTIONS IN TOTAL HIP ARTHROPLASTY

F. A. Bologna^1,2, G. Putame^1,2, A. L. Audenino^1,2, M. Terzini^1,2

¹Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Turin, Italy; ²PolitoBIOMed Lab, Politecnico di Torino, Turin, Italy

16:45 - 16:57
ID: 762

BIOMECHANICAL ANALYSIS OF HIP CEMENTLESS FEMORAL STEM DESIGNS IN PHYSIOLOGICAL AND OSTEOPOROTIC BONE DURING DIFFERENT STATIC LOADS

E. Bori¹, M. Formica², A. Zanirato², T. A. Revetria², J. Ditting¹, B. Innocenti¹

¹BEAMS Department, ULB - Université Libre de Bruxelles, Brussels, Belgium; ²Clinica Ortopedica, IRCCS Policlinico San Martino, Genoa, Italy

17:00 - 17:12
ID: 340

ONLY IN UNLOADED ACTIVITIES TKA DESIGN FEATURES DOMINATE IN THE AMOUNT OF ROLLING AND SLIDING

P. Moewis¹, R. Ehrig^1,2, H. Hommel³, A. Trepczynski¹, L. Krahl¹, G. N Duda¹

¹Julius Wolff Institute, Berlin Institute of Health at Charité – Universitätsmedizin Berlin, Germany; ²Zuse Institut Berlin, Germany; ³Krankenhaus Märkisch-Oderland GmBH, Wriezen, Germany

17:12 - 17:24
ID: 347

SIX DOF KNEE GAIT KINEMATICS OF KINEMATIC ALIGNED TKA

A.-K. Einfeldt¹, L. Tücking², P. Savov², M. Ettinger², H. Windhagen², E. Jakubowitz¹

¹Laboratory for Biomechanics and Biomaterials, Hannover Medical School, Germany; ²Department of Orthopaedic Surgery, Diakovere Annastift, Germany

17:24 - 17:36
ID: 489

FE STUDY ON THE EFFECT OF PATIENT-RELATED VARIATIONS ON THE PRIMARY FIXATION OF A CEMENTLESS PEEK TIBIAL COMPONENT

C. Post¹, T. Bitter¹, I. van Langen¹, A. Briscoe², N. Verdonschot^1,3, D. Janssen¹

¹Radboud University Medical Center, Orthopaedic Research Laboratory, Nijmegen, The Netherlands; ²Invibio Ltd., Thornton Cleveleys, Lancashire, United Kingdom; ³University of Twente, Laboratory for Biomechanical Engineering, Enschede, The Netherlands

17:36 - 17:48
ID: 542

STUDY OF THE LOCATIONS AND MORPHOLOGY OF ISOLATED KNEE FOCAL CARTILAGE DEFECTS USING A STATISTICAL SHAPE MODELING APPROACH

M. Mohammad Sadeghi¹, E. Aşık², P. Emans^1,2, N. Tümer³, G. Tuijthof⁴, A. Roth^1,2

¹Maastricht University, The Netherlands; ²Avalanche Medical BV, Maastricht, The Netherlands; ³Department of Biomaterials & Tissue Biomechanics, Delft University of Technology, The Netherlands; ⁴Department of Biomechanical Engineering, University of Twente, The Netherlands

17:48 - 18:00
ID: 238

INFLUENCE OF LOADING CONDITION ON THE ABILITY TO PREDICT HUMERAL STRESS SHIELDING

C. Mueri¹, A. Henderson¹, G. Maquer¹, J. Bischoff², H. Seyed Hosseini¹, P. Favre¹

¹Zimmer Biomet, Switzerland; ²Zimmer Biomet, US

9:30 - 9:42
ID: 215

THE ROLE OF STATISTICAL SHAPE MODELS IN THE DESIGN FRAMEWORK OF OSSEOINTEGRATED IMPLANTS FOR DISTAL FEMUR

V. Betti¹, A. Aldieri², G. Galteri¹, M. L. Ruspi¹, K. Morellato³, E. Gruppioni³, M. Palanca¹, L. Cristofolini¹

¹Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Bologna, Italy; ²PolitoBIOMed Lab, Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Torino, Italy; ³Centro Protesi INAIL, Vigorso, Bologna, Italy

9:42 - 9:54
ID: 267

IMPLANT STABILITY AND LOAD TRANSFER OF OSSEOINTEGRATED TRANSFEMORAL PROSTHESIS

G. Galteri¹, M. Palanca¹, V. Betti¹, K. Morellato², E. Gruppioni², L. Cristofolini¹

¹Dept of Industrial Engineering, Alma Mater Studiorum - University of Bologna, Bologna, IT; ²Centro Protesi INAIL, Vigorso di Budrio, Bologna, IT

9:54 - 10:06
ID: 337

REASONS FOR OSTEOPENIA IN ABOVE THE KNEE AMPUTEES: A BIOMECHANICAL EXPLANATION

J. L. Zavaleta Ruiz¹, M. J Major², P. Pankaj¹

¹Institute for Bioengineering, School of Engineering, The University of Edinburgh, UK; ²Dept. of Physical Medicine & Rehabilitation, Dept. of Biomedical Engineering, Northwestern University, and Jesse Brown VA Medical Center, Chicago IL USA

10:06 - 10:18
ID: 638

DEVELOPMENT OF A PIPELINE FOR 3D PRINTED CUSTOMIZED PLANTAR FOOT ORTHOSIS BASED ON FEM AND GAIT ANALYSIS

Z. Sawacha^1,2, M. Crosato¹, E. Bertoncello³, A. Guiotto¹

¹Dept of Information Engineering, University of Padova, Italy; ²Dept of Medicine, University of Padova, Italy; ³Orthomedica srl, Padova, Italy

10:18 - 10:30
ID: 659

VERIFICATION OF A PASSIVE ANKLE-FOOT ORTHOSIS DESIGN METHOD BY USING TRUSS MODELS

D. Scherb, P. Steck, S. Wartzack, J. Miehling

Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), Engineering Design, Martensstraße 9, 91058 Erlangen, Germany

11:00 - 11:12
ID: 258

CONTACT AREA AND CONTACT PRESSURE IN KNEE IMPLANTS: COMPARISON OF DIFFERENT TESTING AND FE METHODS

J.-B. Weiß¹, H. Bächle¹, S. Krüger¹, T. M. Grupp^1,2

¹Aesculap AG, Research & Development, Germany; ²Department of Orthopaedic and Trauma Surgery, Musculoskeletal University Center Munich (MUM), Campus Grosshadern, LMU Munich, Munich, Germany

11:12 - 11:24
ID: 335

WEAR RATE COMPARISON BETWEEN ADDITIVE MANUFACTURED AND CASTED FEMORAL COMPONENTS

A. L. Puente Reyna¹, J. Schwiesau^1,2, T. M. Grupp^1,2

¹Aesculap AG, Research & Development, Tuttlingen, Germany; ²Department of Orthopaedic and Trauma Surgery, Musculoskeletal University Center Munich (MUM), Campus Grosshadern, LMU Munich, Munich, Germany

11:24 - 11:36
ID: 477

STRUCTURAL ANALYSIS OF METALLIC ORTHOPAEDIC IMPLANTS BASED ON ASTM STANDARDS: A SOFTWARE COMPARISON STUDY

F. Guidolin, L. Modenese

University of New South Wales, Australia

11:36 - 11:48
ID: 562

EFFECT OF DESIGN PARAMETERS IN FB & MB UKA BIOMECHANICS

B. Innocenti¹, E. Bori¹, T. Luyckx²

¹BEAMS Department (Bio Electro and Mechanical Systems), École Polytechnique de Bruxelles, Université Libre de Bruxelles, Bruxelles, Belgium; ²Department of Orthopedic Surgery, AZ Delta, Roeselare, Belgium

11:48 - 12:00
ID: 890

KINEMATIC VS MECHANICAL ALIGNMENT IN MEDIALLY-STABILISED TKA: A MATCHED-PAIRS KINEMATIC ANALYSIS

O. Taylan¹, D. Shah¹, F. Dandois¹, W. Han², P. Van Overschelde³, L. Scheys^1,4

¹Institute for Orthopaedic Research and Training (IORT), KU Leuven, Belgium; ²Department of Orthopaedics, Beijing Tian Tan Hospital, Capital Medical University, Beijing, China; ³Hip and Knee Unit, AZ Maria Middelares, Gent, Belgium; ⁴Division of Orthopaedics, University Hospitals Leuven, Belgium

12:00 - 12:12
ID: 318

VALIDATION OF A KNEE FINITE ELEMENT MODEL FOR THE DEVELOPMENT OF SURGICAL TRAINING MODELS

K. J. Bennett¹, P. Foroutan¹, E. Fairweather¹, R. Al-Dirini¹, S. Martelli², S. A Sobey³, N. Litchfield³, M. Roe³, K. J Reynolds¹, J. J Costi¹, M. Taylor¹

¹Medical Device Research Institute, Flinders University, Australia; ²Centre for Biomedical Technologies, Queensland University of Technology, Australia; ³Fusetec, Australia

15:45 - 15:57
ID: 748

CONSIDERING MIXED EPISTEMIC AND ALEATORIC UNCERTAINTY IN THE STRUCTURAL VALIDATION OF A SAPIEN-3 TAVI FEM-MODEL

N. Götzen¹, O. Zahalka¹, T. Turgut¹, S. Pasta², V. Bouwman¹

¹4RealSim Services BV, Netherlands, The; ²University of Palermo, Italy

15:57 - 16:09
ID: 434

EFFECT OF THE LUMBAR BELT ON TRUNK MOBILITY: A COMPARATIVE CLINICAL STUDY

A. ERRABITY^1,2, J. P. Vasco Marin¹, R. Bonnaire³, W.-S. Han¹, R. Pannetier², R. Convert², P. Calmels⁴, J. Molimard¹

¹Mines Saint-Etienne, Univ Jean Monnet, INSERM, U 1059 Sainbiose, Centre CIS, Saint-Etienne France; ²Thuasne, BP243, 92307 Levallois-Perret cedex, France; ³Institut Clément Ader (ICA), Université de Toulouse, CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS Campus Jarlard, F-81013 Albi, France; ⁴Hôpital Nord, CHU de Saint-Etienne, France

16:09 - 16:21
ID: 765

INVESTIGATING CERVICAL COLLAR DESIGN AND FIT: INTERFACE PRESSURE AND DISCOMFORT

L. J. Russell, L. Jiang, D. Filingeri, P. R. Worsley

University of Southapmton, UK

16:21 - 16:33
ID: 895

FINITE ELEMENT MODEL FOR THE TREATMENT OF PLAGIOCEPHALY BY CRANIAL ORTHESIS.

G. Vallois¹, E. Marty¹, C. Cavinato², F. Jourdan²

¹Lagarrigue, France; ²LMGC, Université de Montpellier, CNRS, France

16:33 - 16:45
ID: 292

A PIPELINE FOR MECHANOBIOLOGY-DRIVEN DESIGN OF SCAFFOLD

M. J. A. Bedding-Tyrrell, F. Zhao

Swansea University, United Kingdom

17:00 - 17:12
ID: 403

DATA-DRIVEN GENERATION OF INLET VELOCITY PROFILES FOR CFD MODELLING IN THORACIC AORTIC ANEURYSMS

S. Saitta¹, L. Maga^1,2, C. H. Armour³, E. Votta¹, D. P. O’Regan³, M. Y. Salmasi³, T. Athanasiou³, J. W. Weinsaft⁴, X. Y. Xu³, A. Redaelli¹, S. Pirola^2,3

¹Politecnico di Milano, Italy; ²Delft University of Technology, The Netherlands; ³Imperial College London, UK; ⁴Weill Cornell College, NY, USA

17:12 - 17:24
ID: 957

IN SEARCH OF CARDIOVASCULAR BIOMARKERS FOR PRE-ECLAMPSIA

R. van Loon¹, C. Popp¹, D. Kernot¹, J. Carson¹, H. Arora¹, J. Myers², E. Johnstone²

¹Swansea University, United Kingdom; ²University of Manchester, United Kingdom

17:24 - 17:36
ID: 913

MODELLING OF CELL-SCALE HAEMODYNAMICS IN THE MATERNAL INTERVILLOUS SPACE OF HUMAN PLACENTA

Q. Zhou¹, E. Doman², I. L. Chernyavsky^2,3, O. E. Jensen², M. O. Bernabeu^4,5, T. Krüger¹

¹School of Engineering, Institute for Multiscale Thermofluids, The University of Edinburgh, UK; ²Department of Mathematics, The University of Manchester, UK; ³Maternal and Fetal Health Research Centre, School of Medical Sciences, The University of Manchester, UK; ⁴Centre for Medical Informatics, Usher Institute, The University of Edinburgh, UK; ⁵The Bayes Centre, The University of Edinburgh, UK

17:36 - 17:48
ID: 896

NUMERICAL STUDY OF MAGNETIC MICRO-BEADS STEER BY MAGNETIC RESONANCE NAVIGATION IN TUMOR EMBOLIZATION

M. Rezaei Adariani^1,2, J. Pešek¹, N. Li², C. Debbaut³, G. Soulez², I. Vignon-Clementel¹

¹Inria (Saclay IdF), France; ²CR-CHUM(Montreal), Canada; ³UGhent, Belgium

17:48 - 18:00
ID: 968

MODELLING BLOOD FLOW IN A MICRO-VESSEL BIFURCATION

Y. Xue¹, S. Payne², S. Waters¹

¹University of Oxford, United Kingdom; ²National Taiwan University, Taiwan