|
Session Overview | |
| Location: A.1.7 |
|
| |
| 2:15pm - 3:45pm |
TOM3 S1: Optics Design and Fabrication I Location: A.1.7 Chair: Oliver Faehnle, OST – Ostschweizer Fachhochschule, Switzerland Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - NEW TECHNOLOGIES AS KEY COMPONENTS IN OPTICAL SYSTEMS Which key fits into which lock? Carl Zeiss AG, Jena 2:45pm - 3:00pm TOM 3 Optical System Design, Tolerancing and Manufacturing Beam shaping elements for single photon sources based on 3D printed micro-optics Institute of Technical Optics (ITO), Germany 3:00pm - 3:15pm TOM 3 Optical System Design, Tolerancing and Manufacturing Miniaturized static projection system the size of a grain of salt 1: Carl Zeiss AG, Germany; 2: Printoptix GmbH, Germany 3:15pm - 3:30pm TOM 3 Optical System Design, Tolerancing and Manufacturing Laser-based fabrication chain enabling high quality mm-aspheres Fachhochschule Ostschweiz - Buchs, Switzerland 3:30pm - 3:45pm TOM 3 Optical System Design, Tolerancing and Manufacturing Measurement of Mid-Spatial-Frequency Roughness of High-Performance Freeform Metal Optics 1: Fraunhofer IOF, Germany; 2: Friedrich-Schiller University, Institute of Applied Physics, Abbe Center of Photonics, Jena, Germany; 3: Ilmenau University of Technology, Dept. of Mechanical Engineering, Germany |
|
| |
| 8:45am - 10:15am |
TOM3 S5: Optics Design and Fabrication V Location: A.1.7 Chair: Jens Bliedtner, Ernst-Abbe-Uiversity of Applied Sciences Jena, Germany Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - High Order Surface Artifacts on Aspheres and their Interpretation in Metrology and Tolerancing 1: Edmund Optics GmbH, Germany; 2: Edmund Optics Inc., USA 9:15am - 9:30am TOM 3 Optical System Design, Tolerancing and Manufacturing The pea puffer aspheres: circumference optimized aspheres ccp polishing 1: OST – Ostschweizer Fachhochschule, Switzerland; 2: Edmund Optics, USA 9:30am - 9:45am TOM 3 Optical System Design, Tolerancing and Manufacturing SwissVAMyKnife.jl: an open-source package for tomographic volumetric additive manufacturing Laboratory of Applied Photonics Devices, École polytechnique fédérale de Lausanne, Lausanne, Switzerland 9:45am - 10:00am TOM 3 Optical System Design, Tolerancing and Manufacturing Twyman effect in laser polishing Fachhochschule Ostschweiz - Buchs, Switzerland 10:00am - 10:15am TOM 3 Optical System Design, Tolerancing and Manufacturing Accelerating two-photon polymerization via single-photon absorption assistance 1: Laboratory of Applied Photonics Devices, School of Engineering, Ecole Polytechnique Fédérale de Lausanne, CH-1015, Lausanne, Switzerland; 2: AMS Osram, Martigny, Switzerland |
| 2:15pm - 3:45pm |
TOM3 S3: Optics Design and Fabrication III Location: A.1.7 Chair: Marco Hanft, Carl Zeiss AG, Germany Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - Aberration principles of zoom lens groups for computational zoom lens design University of Rochester, United States of America 2:45pm - 3:00pm TOM 3 Optical System Design, Tolerancing and Manufacturing Principal component analysis of refractive index spaces: from glass properties to residual color prediction Carl Zeiss AG, Germany 3:00pm - 3:15pm TOM 3 Optical System Design, Tolerancing and Manufacturing Transient structural, thermal and optical performance (STOP) analysis with accelerated thermomechanical computation University of Stuttgart, Germany 3:15pm - 3:30pm TOM 3 Optical System Design, Tolerancing and Manufacturing Using sensitivity analysis for glass substitution in lens design Photonics Precision Engineering GmbH, Germany 3:30pm - 3:45pm TOM 3 Optical System Design, Tolerancing and Manufacturing Exploring the potential of chalcogenide lens designs for cost-effective LWIR systems Carl Zeiss AG, Germany |
| 4:15pm - 5:45pm |
TOM3 S4: Optics Design and Fabrication IV Location: A.1.7 Chair: Marco Hanft, Carl Zeiss AG, Germany Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - A new type of wide-angle lenses with superior perspective projection Friedrich-Schiller-University Jena, Germany 4:45pm - 5:00pm TOM 3 Optical System Design, Tolerancing and Manufacturing A perturbation method for the ray-transfer matrix of the crystalline lens Eindhoven University of Technology, Netherlands, The 5:00pm - 5:15pm TOM 3 Optical System Design, Tolerancing and Manufacturing Efficient computation of the Jacobian in the damped least-squares method for optical design problems using algorithmic differentiation 1: Carl Zeiss AG, 73446 Oberkochen, Germany; 2: Institute of Numerical Mathematics, Ulm University, 89081 Ulm, Germany 5:15pm - 5:30pm TOM 3 Optical System Design, Tolerancing and Manufacturing Revolutioning Lens-Based Systems Design: showcasing the power of OptiMat Sagittal Optics, Spain 5:30pm - 5:45pm TOM 3 Optical System Design, Tolerancing and Manufacturing An integrated exposure and measurement tool for 5-DOF direct laser writing Technische Universität Ilmenau, Institute of Process Measurement and Sensor Technology, Germany |
|
| |
| 8:45am - 10:15am |
TOM3 S2: Optics Design and Fabrication II Location: A.1.7 Chair: Sven Schröder, Fraunhofer IOF, Germany Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - Inflatable on-axis and off-axis space telescope designs 1: James C. Wyant College of Optical Sciences, University of Arizona, 1630 E. University Blvd., Tucson, AZ 85721, USA; 2: Department of Astronomy and Steward Observatory, University of Arizona, 933 N Cherry Ave., Tucson, AZ 85721, USA; 3: Large Binocular Telescope Observatory, University of Arizona, 933 N Cherry Ave., Tucson, AZ 85721, USA 9:15am - 9:30am TOM 3 Optical System Design, Tolerancing and Manufacturing Mesh-based double-sided freeform lens optimization 1: University of Science and Technology of China; 2: Cardiff University 9:30am - 9:45am TOM 3 Optical System Design, Tolerancing and Manufacturing Generating function approach for freeform two-reflector two-target system 1: Eindhoven University of Technology, Netherlands, The; 2: Signify Research, Netherlands, The 9:45am - 10:00am TOM 3 Optical System Design, Tolerancing and Manufacturing Simultaneous atmospheric pressure plasma jet etching and laser irradiation for ultra-precise optical glass processing 1: Leibniz Institute of Surface Engineering (IOM), Germany; 2: Institute of Manufacturing Science and Engineering, Technische Universität Dresden, Germany 10:00am - 10:15am TOM 3 Optical System Design, Tolerancing and Manufacturing Investigations into temperature measurement in a laser-based heating process of optical, machined components Ernst-Abbe University of Applied Sciences Jena, Germany |
| 4:15pm - 5:45pm |
TOM3 S6: Optics Design and Fabrication VI Location: A.1.7 Chair: Sven Schröder, Fraunhofer IOF, Germany Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - Polarization optical design in AR/VR product development Meta, United States of America 4:45pm - 5:00pm TOM 3 Optical System Design, Tolerancing and Manufacturing Enhanced imaging of Subsurface Damage in optical glass SF6 with Optical Coherence Tomography using KOH wet etching 1: Ernst-Abbe-Hochschule Jena University of Applied Sciences, Faculty of SciTec, 07745 Jena, Germany; 2: Leibniz Institute of Surface Engineering (IOM), 04318 Leipzig, Germany; 3: TU Dresden, Institute of Manufacturing Science and Engineering, 01062 Dresden, Germany 5:00pm - 5:15pm TOM 3 Optical System Design, Tolerancing and Manufacturing Fabrication of low-cost free-form optical elements with standard LCD 3D printer for advanced opto-sensing and imaging applications Bundesanstalt für Materialforchung und prüfung, Germany 5:15pm - 5:30pm TOM 3 Optical System Design, Tolerancing and Manufacturing Light Scattering of optical Components and their Imperfections: Measurement, Modelling, and System Analysis Fraunhofer IOF, Germany 5:30pm - 5:45pm TOM 3 Optical System Design, Tolerancing and Manufacturing Tailored high-end optics with focussed ion beams Bühler Alzenau GmbH, Germany |
|
| |
| 8:45am - 10:15am |
TOM3 S7: Optics Design and Fabrication VII Location: A.1.7 Chair: Daewook Kim, University of Arizona, United States of America Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - Optic technologies for high energy & power laser systems Lawrence Livermore National Laboratory, United States of America 9:15am - 9:30am TOM 3 Optical System Design, Tolerancing and Manufacturing Optical component reliability in high-energy laser systems: challenges and insights HiLASE Centre, Institute of Physics of the Czech Academy of Sciences, Czech Republic 9:30am - 9:45am TOM 3 Optical System Design, Tolerancing and Manufacturing Surface characterization in fabrication environments using angle resolved light scattering: From roughness and defect analysis to in-situ coating inspection Fraunhofer Institute for Applied Optics and Precision Engineering IOF, Jena, Thuringia, Germany 9:45am - 10:00am TOM 3 Optical System Design, Tolerancing and Manufacturing Desensitized telescope optical design: NSOS-alpha case study 1: Spanò Paolo, Ph.D., Italy; 2: Tomelleri s.r.l.; 3: Optical Development; 4: IDOM |
| 10:45am - 12:15pm |
TOM3 S8: Optics Design and Fabrication VIII Location: A.1.7 Chair: Oliver Faehnle, OST – Ostschweizer Fachhochschule, Switzerland Invited TOM 3 Optical System Design, Tolerancing and Manufacturing Invited - New polishing concepts for optical components in flexible and efficient process chains 1: Ernst-Abbe-University of Applied Sciences Jena, Germany; 2: OST – Eastern Switzerland University of Applied Sciences, Buchs, Switzerland 11:15am - 11:30am TOM 3 Optical System Design, Tolerancing and Manufacturing Additive manufactured cerium oxide foils, used as pads for polishing processes of brittle-hard materials 1: Ernst-Abbe University of Applied Sciences Jena, Germany; 2: Qsil Ceramics GmbH (formerly SiCeram GmbH), Germany; 3: Technische Universität Ilmenau, Germany 11:30am - 11:45am TOM 3 Optical System Design, Tolerancing and Manufacturing Tomographic volumetric additive manufacturing by holographic projections 1: Laboratory of Applied Photonics Devices, School of Engineering, École Polytechnique Fédérale de Lausanne - EPFL, Switzerland; 2: SDU Centre for Photonics Engineering, University of Southern Denmark, Denmark; 3: AMS Osram, Switzerland 11:45am - 12:00pm TOM 3 Optical System Design, Tolerancing and Manufacturing Beyond the IFTA – Phase mask generation for 3D laser beam shaping, tailored temperature distributions and optical amplifiers 1: Chair for Technology of Optical Systems TOS, RWTH Aachen University; 2: Fraunhofer Institute for Laser Technology ILT |