Mechanics and electrochemistry for bulk energy storage in concrete materials & structures

F.-J. Ulm

Importance of drug order in sequential treatments against osteoporosis involving denosumab and romosozumab

F. J. Martínez Reina, R. Ruiz Lozano, J. L. Calvo Gallego, P. Pivonka

Bone micro-mechanobiology of implant-femur interaction: a multi method approach combing CT and SASTT imaging with analytical mechanics

L. Pircher, T. A. Grünewald, H. Lichtenegger, M. Liebi, A. Weinberg, C. Hellmich

Deep-learning based framework for automated mechanobiological analysis of bone response using micro-CT imaging data of mouse tibiae

P. Pivonka, A. Lagzouli, N. Muhl-Castoldi, V. Sansalone, D. M. Cooper, A. Othmani

Digital volume correlation resolves load-induced high articular strain foci in osteoarthritis-prone joints

A. Sharma, L. Evans, A. Parmenter, J. Brunet, K. Madi, K. Staines, P. Lee, A. Pitsillides

A multiscale bone cell population model based on a 2-state receptor model accounting for cellular responsiveness to PTH

C. Modiz, N. Muhl-Castoldi, S. Martelli, S. Scheiner, V. Sansalone, P. Pivonka

Use of a hysteretic device in vibration mitigation (Keynote Lecture)

F. Vestroni, P. Casini

A theoretical and experimental study on the optimal design of Sliding Tuned Liquid Column Dampers for structural vibration control (Keynote Lecture)

C. Masnata, C. Adam, A. Pirrotta

Implementation of tuned mass damper control concept for integrated seismic and energetic retrofit of existing buildings

M. Basili, M. De Angelis, F. Busato

A fundamental study on active vibration control of cross-laminated timber members

N. Hirschfeldt, T. Furtmüller, C. Adam

Nanoscale modeling for structural vibration control

R. Barretta, R. Luciano, F. Marotti de Sciarra, M. S. Vaccaro

Efficient approaches for simulating large deformation problems

J. P. Hambleton

Particle finite element method for large deformation simulation of geotechnical hazards under fluid-solid interaction

W. Sun, W. Zhang, W.-H. Yuan

Implicit SNS-PFEM with dual mortar method for thermo-hydro-mechanical large deformation problems

X.-H. Wu, Q. Zhang, W.-Q. Feng, Z.-Y. Yin, H.-C. Fang

Hybrid FEM and Peridynamic simulation of forerunning fracture in porous media

T. Ni, B. Schrefler

Modelling multi-physical field coupling process of rock by discretized virtual internal bonds

Z. Zhang

Microfiber-reinforced bentonite clay for geological repositories of nuclear spent fuel: multiphysical laboratory tests and computational modeling

A. Azzam, M. Rahmani, Y.-R. Kim, J. Eun, S. Kim

Creep and shrinkage of a limestone calcined clay cement paste determined in hourly performed three-minute creep tests

S. J. Schmid, O. Lahayne, L. Zelaya, B. Pichler

Basic creep properties of the hydration products in mature slag-based CEM II concretes

M. Sorgner, R. Díaz Flores, T. Pilgerstorfer, B. Moritz, B. Pichler, C. Hellmich

Early-age elastic and creep properties of graphene oxide cement paste determined by three-minute-long creep tests

M. Shahid, S. J. Schmid, O. Lahayne, A. Robisson, B. Pichler

Influence of cracking and viscoelasticity on nonlinear creep of concrete

R. Díaz Flores, C. Hellmich, B. Pichler

Long-term concrete strain measurements of large-scale experiments using vibrating wire strain gauges

W. Bachofner, J. Kollegger

Characterization of time-dependent restrained shrinkage in thin ultra-high performance concrete overlays

D. Daneshvar, P. Preinstorfer, K. Deix, B. Shafei, A. Robisson

Variations in experimental investigations of clear wood: to what extend can multiscale micromechanical models explain them?

E. Binder, M. Schweigler, T. K. Bader

Phase field method-based modeling of wood fracture

S. Pech, M. Lukacevic, J. Füssl

Characterizing a novel strand based engineered wood product for the use in construction

A. Ghazanfari, B. Kromoser

Analytical and experimental study on glulam trusses with birch plywood gusset plates

M. Debertolis, Y. Wang, T. Wang, R. Crocetti, M. Wålinder, L. Blomqvist, S. Rossi, A. Polastri, P. Rigo

Analyzing the failure probability of glued laminated timber beams across varying sizes using the finite weakest-link theory

C. Vida, S. Pech, M. Lukacevic, J. Füssl

Preparation of samples for the production of Glued Solid Timber (GST) beams according to EN 14080

B. Jashari, R. Sejdiu, L. Idrizi, A. Bajraktari

An approximate analytical technique for transient response PDF of a linear oscillator under a non-Gaussian colored noise

T. Tsuchida, K. Kimura

Demonstration of continuous gamma process for site specific structural capacity quantification for aging infrastructure

T. Micic

Uncertainty quantification on seismic response of an RC bridge pier considering varying material properties

M. Kitahara, R. Kurihara

Structural reliability of complex nonlinear systems exposed to evolutionary stochastic excitation

I. P. Mitseas, M. Beer

Probabilistic model selection of the Ground Motion Prediction Models for Northern South America

B. Salazar, A. Ortiz, J. Marulanda

Analysis of the behavior of the structure under internal ANFO explosion

S. Ko, S. Choi, J. J. Kim, W. Kwon

Bay Bridge

J. S Plachta

Development of microstructural heterogeneities in cementitious slurries and mortars at rest and under flow: a hypothesis for pumping blockage and material defects

A. Robisson

An elasto-plastic finite-deformation micropolar material point method for strain localisation problems

T. J. O'Hare, P. A. Gourgiotis, W. M. Coombs, C. E. Augarde

Strain localization analysis of an infinitesimal micropolar elastoplastic constitutive model rooted in critical state soil mechanics

P. Hofer, M. Neuner, P. Gamnitzer, G. Hofstetter

A return-free plastic integration for mixed control problems and its applications in elastoplasticity of materials

L.-W. Liu, P.-H. Chen

Finite element analysis of shear failure in sand using micropolar hypoplasticity

K. V. Basche, M. Schreter-Fleischhacker, G. Medicus, M. Neuner, G. Hofstetter

Efficient algorithmic formulation of trabecular bone remodelling using a two-scale model of trabecular bone

A. Papastavrou, P. Pivonka, P. Steinmann

In silico-aided design of functionally graded porous scaffolds for bone tissue engineering

P. Posabella, M. Heljak, M. Costantini, W. Święszkowski

Osteogenic control of bone mechanobiology through BMP loaded interlocked scaffolds

K. Katti, S. Jaswandkar, K. Kundu, D. Katti

The efficient numerical tool to simulate the phenomenon of trabecular bone remodeling for multiple load cases

M. Nowak, J. Polak

Vertical vibration control of a cross-laminated timber plate through fluid inerter

M. Chillemi, T. Furtmüller, C. Adam, A. Pirrotta

Stochastic parameter identification of a fluid inerter-based control device

B. Goller, M. Chillemi, T. Furtmüller, C. Adam

Water-tank metabarriers for seismic surface waves attenuation

G. Failla, A. F. Russillo

Thermoacoustic Fano-based bistable energy converters: a novel paradigm of thermodynamic cycles for waste-energy recovery

S. Buonocore, A. Hubarevich, F. De Angelis

Experimental investigations on horizontally restrained CFRP reinforced glued laminated timber beams

L. Esser, A. Frangi

Layerwise model for the failure analysis of Cross Laminated Timber

G. Blondet, J. Bleyer, A. Lebée

Long-term behavior of novel solid wood-concrete-composite floors with combined shear connectors

A. Müllner, A. Fadai

Multi-scale multi-physics modelling of timber-concrete hybrid structures

L. Wan-Wendner

Homogenization of weakly nonlinear phenomena in electroactive fluid saturated porous media with multiple time scales

E. Rohan, V. Lukeš, F. Moravcová, R. Cimrman

Impact of various uncertainties on the modeling of sorption-induced deformations

J. Leng, P. Dangla, M. Vandamme

Study of crystallization pressure by molecular simulation

B. Mahmoud Hawchar, T. Honorio, M. Vandamme, F. Osselin, J.-M. Pereira, L. Brochard

Towards a DFT approach to the mechanical properties of solids

A. Kahlal, V. Sermoud, G. Pijaudier-Cabot, D. Grégoire, C. Miqueu

Stability of unlined circular tunnel in layered rock masses

S. Sahu, J. P. Sahoo, G. Tiwari

Multiphase modeling of ground freezing-shotcrete interaction in tunneling construction

R. J. Williams M., G. Meschke

A deep learning-based method for detecting joints and evaluating segment deformation in shield tunnels

B. Zhang, W. Song, X. Liu

Will a concept of pre-structure be applicable to tunnels in squeezing ground?

Y. Yuan, B. Shi, Y. He, J.-L. Zhang

Integrated evaluation of blast loads on reinforced concrete structures: a strength and ductility approaches

Y. Kim, S. Kim, J. Shin

Machine-learning based optimum retrofit scheme for reinforced concrete frame structures: a case study on 1980s school buildings

S. Kim, Y. Kim, J. Shin

Neural network-driven representation and computational particle mechanics via signed distance fields

Z. Lai, L. Huang

Shape-based vision system optimized for seismic damage detections of nonstructural components in buildings

I. Choi, B. K. Oh, H. W. Oh

A machine learning approach for offshore wind turbine tower fatigue and fragility analysis

J. McAuliffe, S. Baisthakur, B. Fitzgerald

A study on optimal sensor placement of multi-linked floating offshore structure for prediction accuracy improvement of structural response using distortion base mode method

K. Sim, K. Lee, M. Ki

Advancing wind farm fatigue analysis: insights from high-fidelity modelling and machine learning

A. Alazhare, B. Fitzgerald

Blade pitch control of floating offshore wind turbines for mitigating corrosion fatigue deterioration and enhancing structural reliability

Y. Pu, J. Zhang, Y. Dong, B. Fitzgerald

Phase field simulation of hydrogen-assisted fatigue

C. Cui, E. Martínez-Pañeda

Robust and efficient implementation of generalized continuum models based on automatic differentiation with hyper-dual numbers

A. Dummer, M. Neuner, P. Gamnitzer, G. Hofstetter

Homogenized post-peak response of composites from phase-field fracture simulation at microscale

S. Sagar, S. R. Chowdhury

Comparison between block preconditioner and monolithic preconditioner for iterative solution of coupled multi-field problems from generalized continuum models

N. Alkmim, P. Gamnitzer, G. Hofstetter

Microstructural characterization of fiber-reinforced cementitious composites using micro-CT measurements and evaluation of their mechanical behavior using simulations

J. Suh, T.-S. Han

Multifidelity reliability and sensitivity analysis

C. Proppe

Active mass dampers for cross laminated timber floors - comparison between experimental and numerical investigations

T. Hillberger, T. Furtmüller, R. Maderebner

Experimental investigation of track nonlinear energy sink with rotational mass using real-time hybrid simulation

C.-M. Chang, T.-L. Kao

An investigation of the behavior of reinforced concrete coupling beams

D. Bhunia, R. P. West, J. K. Bhaskar

On the effects of the precritical nonlinearities on buckling of flexible systems (Keynote Lecture)

A. Luongo, M. Ferretti

Variational criteria for extreme values of the stiffness of proportionally loaded structures as solutions of an inverse problem (Keynote Lecture)

H. A. Mang

The behaviour of thin composite plates with extension-bending coupling under harmonic compressive load

T. Kubiak, M. Bohlooly Fotovat

Large displacement analysis of angle-ply beam-type structures considering shear deformation effects

D. Banić, G. Turkalj, D. Lanc

Multi-scale analyses on interfacial behavior between normal concrete (NC) and ultra-high performance concrete (UHPC)

B. Zhang, J. Yu, W. Chen, H. Liu

A super-ellipsoid convex model based reliability analysis of rock tunnel with rock properties modelled via mixed uncertainty models based on available data

S. Maurya, G. Tiwari

Thermal stresses in concrete beams as a result of multiscale constraints

H. Wang, Y. Yuan, H. Mang, Q. Ai, X. Huang, B. Pichler

3D numerical modelling of inter-seasonal heat harvesting of a geothermal road in the UK

J. Lyu, N. Makasis, L. Cui, B. Cao

Utilization of phase change materials in the support structure of geothermal tunnel: efficacy in geothermal hazard mitigating and heat energy storage

Q. Wang, H. Wang, J.-L. Zhang, E. Koenders, Y. Yuan

SPH implementation to large deformation of granular mass using an advanced hypoplastic constitutive model

C. Zhu, W. Wu, C. Peng, S. Wang

Numerical and analytical analysis of fracture closure modes and their importance in data interpretations

A. Dahi Taleghani, R. Wang

A pioneering framework for accurate reconstruction of arbitrary granular materials

R. Li, Z. Yin

A novel clump-based breakage model in discrete element method for simulating crushable aggregates

C. Xu, Z.-Y. Yin, P. Wang

Predicting the performance of glued-in rod joints

S. K. Alavi, H. R. Valipour, M. A. Bradford

Numerical assessment of brittle failures in dowel-type timber connections loaded parallel to the grain

C. Dapieve Aquino, M. Schweigler, L. Rodrigues, J. M. Branco, T. K. Bader

The effective timber thickness for brittle failure assessment of dowel-type connections

C. Dapieve Aquino, M. Schweigler, L. Rodrigues, J. M. Branco, T. K. Bader

Single-dowel steel-to-timber connections under cyclic and high strain rate loading

K. Sroka, A. S. Cao, P. Palma

Beam-on-foundation modelling of dowel-type timber connections under cyclic loading

A. Weese, M. Schweigler, C. Sandhaas, T. K. Bader

Linearization approaches for stochastic dynamic analysis of systems endowed with non-integer order differential elements

P. Spanos

Application of DIC method to identify the relationship between crack width and deflection in reinforced concrete beams

D. Meiramov, Y. Seo, H. Ju

Crack healing under sustained load in concrete: an experimental/numerical study

G. Di Luzio, L. Ferrara, A. Cibelli, R. Wan-Wendner

Enhancing computational efficiency in lattice discrete particle modeling for analyzing concrete failure behavior

J. Wang, J. Vorel, W. Botte, R. Wan-Wendner

Evaporation in concrete early-age maturation: multiphasic model

S. Prskalo, M. H. Gfrerer, M. Schanz

Mesoscopic simulation of corrosion-induced cracking of reinforced concrete

Y. Li, X. Ruan, H. A. Mang, B. Pichler

Novel meso-scale reactive-transport model for carbonation of OPC

M. Tang, Q. Phung, S. Seetharam, E. Coppens, J. Shao, R. Wan-Wendner

Reversible energy absorption: harnessing sequential buckling in mechanical metamaterials

A. Wadee, A. Bekele, A. Phillips, A. Koellner

On the capability of gradient elasticity models to predict instabilities in Fermi-Pasta-Ulam softening chains with short and long-range interactions

N. Challamel, C. Combescure, V. Picandet, M. Ferretti, A. Luongo

Interfacial phenomena in the lateral-torsional instability of sandwich beams

A. Wurf, Y. Frostig, O. Rabinovitch

A multi-layered structural approach to stability of orthodontic brackets

B. Azarov, O. Rabinovitch

Buckling load of an asymmetrically supported 3D column

P. Kočman, S. Schnabl

Test and design of fabricated steel I-profiles under compression

G. Langone, U. Ali, M. Shamlooei, X. Ruan, B. Rossi

Machine learning enabled landslide hazard assessment

S. J. Semnani

Slide, hold, learn: dynamic friction meets neural networks

J. Garcia-Suarez

Thermal creep of clayey soils: experiments and modelling

Z.-J. Chen, W.-Q. Feng, J.-H. Yin

Numerical analysis on negative skin friction considering creep under embankment loading

R. Liang, Z.-Y. Yin, J.-H. Yin

Nonlinear ground response analysis of liquefiable fines-dominated deposits

D. Mistry, S. Mandal, G. R. Dodagoudar

Dynamic soil-structure interaction of railway bridges: simple lumped parameter models vs. detailed coupled Finite Element – Boundary Element approaches

P. König, C. Adam

Frequency-domain fatigue life evaluation of a steel bridge considering vibrational characteristics of traffic loads

M. Ishihara, Y. Yaohua, D. Su, M. Kitahara, T. Nagayama

Impact of the modeling strategy on the dynamic response prediction of weakly coupled multi-span bridges subjected to high-speed trains

M. Mack, B. Goller, P. König, C. Adam

Residual performance estimation of a seismic-isolated bridge based on ABC model updating using seismic response data

T. Kitahara, M. Kitahara, Y. Kajita

Modal identification of a railway bridge via drive-by acceleration data from a diagnostic vehicle

C. Stoura, V. Dertimanis, C. Kossmann, E. Chatzi

New methods for data-based determination of damping factors with application on railway bridges

A. Stollwitzer, L. Bettinelli, S. Loidl, J. Fink

Advanced structural modeling of cross-laminated timber buildings: from elemental analysis to comprehensive structural assessment

M. Wallner-Novak, A. Fadai

A parametric framework to assess the limit states of tall timber buildings - preliminary results

A. Clerc, A. Frangi

Learnings from monitoring of realized and under-construction timber buildings

M. Dorn, C. Larsson, C. Amaddeo, O. Abdeljaber

Mechanical behaviour of timber chock structures for underground mine support

M. Dehghanipoodeh, J. Hashemi, H. Valipour, H. Masoumi

Influence of drying shrinkage on dynamic properties of cross-laminated timber

T. Furtmüller, M. Kendlbacher

Characterization of functionalized binder systems by means of dynamic-mechanical analysis

L. Göbel, T. Schulz, M. Ganß

Novel design of cementitious composites with the use of limestone quarry waste and silica fume

A. Kyriakidis, H. Jaber, A. Georgiou, R. Panagiotou, I. Ioannou, A. Michopoulos

Recyclable bio-synthesis hydrogel-based xoncrete (Bio-HBC): investigation of strength in successive material generations

S. C. Lam, N. Liu, W. Huang, Q. Yi, J. Qiu, F. Sun

Structural response of eco-UHPC with recycled steel fibers

M. A. Moustafa, A. Romero

Rehabilitation of deteriorated RC beams by applying external post-tension stresses: developing machine learning prediction models of ultimate limit state

A. Badnjki, T. Öztürk

Automatic differentiation and neural networks for parameter identification of hysteresis models

M. Kaltenbacher, E. Eniz Museljic, K. Roppert

Data-driven variational method for discrepancy modeling: application to nonlinear elasticity and viscoelasticity

A. Masud, S. Goraya

Influence of hemodynamics and temporal change in intracranial aneurysm shape on machine learning-based rupture prediction

Y. Watase, S. Fujimura, G. Kudo, H. Kanebayashi, T. Ishibasi, H. Ohwada, M. Yamamoto, Y. Murayama

Learning mass-spring-damper dynamics via an incomplete equation of motion, Koopman operator and topology

Z. Chen, H. Sun, W. Xiong, N. Wang

Physics Extraction Pods (PEP) find statistical closure

R. Ghanem

Statistical surrogate models on small datasets for aeroacoustic computational modeling in liners of turbofan engines

A. Sinha, C. Desceliers, C. Soize, G. Cunha

Memory of flow and residual stresses: from jammed soft solids to cement pastes

E. Del Gado

Phase-field-based chemo-mechanical modelling of corrosion-induced cracking in reinforced concrete

E. Korec, M. Jirasek, H. S. Wong, E. Martinez-Paneda

Modeling two-phase mechanical behavior in lattice discrete particle models

J. Wang, J. Vorel, W. Botte, R. Wan-Wendner

Time dependent deformations in concrete: a multi-physics multiscale model and its validation with Test Results

B. Pal, A. Ramaswamy

Stability and bifurcation in nonlinear mechanics

C. Stolz

Closed-form solutions for the elastic-plastic buckling design of external pressure vessels

V. D. Do, P. Le Grognec, P. Rohart

Propagating instabilities in collapsible tubes of nonlinear elastic materials

I. Karetsa, A. G. Stamou, I. Gavriilidis, S. A. Karamanos

Shape grammar for optimisation of perforated plates subject to buckling

E. I. Naraidoo, B. Rossi, Z. You

Exploring graph neural networks for bridges SHM

G. Marasco, S. Pakzad

A perturbation technique for natural frequency analysis of structures with cracks or other sources of additional compliance

Y. Vetyukov, R. Buchta

The challenges of surrogate modelling of modal properties

B. Kurent, N. Friedman, S. Vallely, B. Popovics, S. Schoenwald, B. Brank

Finite-element-based prediciton of moisture uptake and dry-out in CLT caused by water infiltration through end-grain surfaces

F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl

Stress development during and after kiln-drying of self-shaped Norway spruce bilayer plates

M. Naghdinasab, G. Dill-Langer, P. Grönquist

Towards a consistent description of creep in spruce

F. K. Wittel, A. Ferrara, J. M. Maas, J. Amando de Barros

Asymmetric cortex structures in recent and fossil plants: an inspiration for 3D reticulated actuators

T. Masselter, T. Speck

Multiscale analysis of PVC geomembrane mechanical response through DEM simulations

N. Akel, A. Wautier, G. Stoltz, N. Touze, F. Nicot

Role of the mesoscale in the mechanics of clays

L. Brochard

Linear elasticity of transversely isotropic paper sheets: comprehensive validation of a multiscale continuum micromechanics model

P. M. Godinho, C. Hellmich

A framework for data-driven multiscale modeling of thermomechanical behavior of dense granular materials

R. L. Rangel, J. M. Gimenez, A. Franci

Constitutive modeling of granular soils based on the shear-transformation-zone theory

N. Guo, W. Li, Z. Yang

A temporal graph neural network-based simulator for granular materials

S. Zhao, H. Chen, J. Zhao

Elastoplastic constitutive modeling of granular materials via thermodynamics-informed neural networks

M. Su, N. Guo

A visco-hypoelastic model to describe the rate-dependent tensile responses of individual collagen fibrils

Y.-R. Chiang, O. G. Andriotis, C. Hellmich, P. J. Thurner

Collagen fibrillar pre-strain, ordering and internal stress gradients modulating small-scale biomechanics of cartilage and skin

H. S. Gupta

Heterogeneous structure and dynamics of water in a hydrated collagen microfibril

M. Vassaux

Study on the change of structural performance of RC structures building subjected to drying

R. Kurihara, N. Chijiwa

Temperature impact on the mechanical and physical properties of lining concrete in nuclear waste disposal

S. Abdo, T. Phung Quoc, R. Caspeele, S. Seetharam, R. Wan-Wendner

The influence of weather patterns and global warming on chloride ingress in concrete structures

H. Hamidane, O. Dehwah, Y. Xi, A. Messabhia, A. Ababneh

Temperature profiles of concrete members placed in different geographical regions: a guideline for installation and design of bonded anchors

I. Boumakis, T. Pregartner

Chemo-thermo-hygro-mechanical modelling of blended concretes at elevated temperatures

S. Peters, G. Meschke

Path-following for structures undergoing buckling instabilities and material damage

A. Köllner

Buckling-driven design of material extrusion manufactured stayed polymer lattices

Y. Ou, C. Völlmecke

Instability in crack propagation of layered materials using the phase field approach

S. Mrunmayee Uday, A. Rajagopal

Computational modelling of cold-formed steel beam for improved seismic performance using optimization

B. Kumar, A. N. R. Chowdhury, C. Kolay

Local buckling of compressed outstand plates: an analytical approach

J. Becque

Hybrid simulation to investigate inelastic higher-mode effects in RC structural walls

P. Paultre, M. Aftabiazar

Numerical modeling and experimental validation of novel, bioinspired seismic isolators

F. Fraternali, V. Adinolfi, G. Germano, J. de Castro Motta, G. Benzoni, A. Amendola

Pseudo-dynamic testing with sub-structuring applied to progressive collapse

J. B. Charrié, D. Bertrand, C. Desprez, S. Grange

Next generation friction damper

M. Titirla

Kinematics of hydraulic plucking in fractured rock

M. H. Gardner

Numerical modeling of the oscillation roller-subsoil interaction system

I. Paulmichl, R. Bergman

Solving inverse problems in granular mechanics with differentiable simulators

K. Kumar, Y. Choi

Molecular interactions regulate engineering properties of swelling clays

D. R. Katti, K. S. Katti

A phase field model for frictional fracture phenomena in rock masses

S. Liu, Y. Wang

Numerical modelling of steel fiber reinforced concrete tunnel lining segment subjected to flexure

M. Bhadury, K. Kirupakaran, R. Gettu

Research on seismic response of prefabricated open caisson constructed by VSM method

Z. Tang, X. Liu

Hereditary mechanics-based stress prognosis in segmented tunnel linings

A. Razgordanisharahi, M. Sorgner, T. Pilgerstorfer, B. Moritz, C. Hellmich, B. Pichler

Research on evolution law of mechanical behavior of non-circular shield tunnel linings with cross-section geometry transformation

X. Liu, Z. Liu, Y. Ye, B. T. Cao, G. Meschke

Metaball discrete element lattice boltzmann method for fluid-particle interactions with non-convex shapes

P. Zhang, S. Galindo-Torres

Comparison of three different multiphase LBM strategies for numerically obtaining the soil water retention curve of granular materials

C. M. Toffoli, R. Hosseini, J. Grabe

Resolved CFD-DEM modeling of debris flows, avalanches, and floods with arbitrary-shaped boulders and driftwood impacting structures and forests

Y. Kong, Z. Lai, J. Yin, J. Zhao

Multiscale insights into the behaviour of laterally loaded pile

A. Zhang, C. Couture, F. Collin

Modeling and application of hydraulic fracturing based on adaptive finite volume-phase field method

X. Yang, N. Guo

Investigating stretched collagen fibrils using polarization-resolved second harmonic generation microscopy

M. Harvey, R. Cisek, D. Tokarz, L. Kreplak

Mechanical behavior of individual collagen fibrils in force-controlled mechanical tests

M. Nalbach, M. Fuchs, N. Motoi, M. Rufin, O. Andriotis, G. Schitter, P. J. Thurner

Towards a real-time imaging of the assembly and disassembly of collagen nanofibers

C. Garcia-Sacristan, V. G. Gisbert, K. Klein, A. Šarić, R. Garcia

Linking the electrostatic and mechanical properties of collagen

P. Mesquida, I. Sikka, R. Dupont, E. Gachon, Z. Bai

Constructing an isotropic damage model from coarse graining of lattice modelling results for quasi-brittle materials

J. Khoury, G. Pijaudier-Cabot

A novel DEM-based coupled 3D thermo-hydro-mechanical mesoscopic model for very-low porosity materials

M. Krzaczek, J. Tejchman

Static/dynamic response of partially saturated concrete using an improved fully coupled DEM/CFD approach

M. Krzaczek, J. Tejchman

Simulation on creep and stress relaxation of calcium silicate hydrate in microscale by discrete element method

Z. Zhang, G. Geng

Comparison of Lattice Discrete Particle Modeling (LDPM) implementations: lessons learned and future work

G. Cusatis, E. Lale, K. Yu, M. Troemner, M. Pathirage, Y. Lyu, I. Koutromanos, J. Elias, M. Stredulova, T. Xue, M. Alnaggar

Bayesian inference of constitutive law parameters for crack localization using full-field displacement measurements

A. Jafari, K. Vlachas, E. Chatzi, J. F. Unger

FE-analysis of long-term performance of an epoxy bonded anchor based on nanoindentation and CT-scan

F. Zhu, K. Bergmeister

Investigation of installation effects on the fracture behavior of adhesively bonded joints

S. TerMaath, K. Bezem, A. Handy, C. Crusenberry

Scaling the unscalable: bridging stochastic discrete mesoscale simulations with analytical modeling for the statistical strength of concrete

M. Vořechovský, V. Sadílek, M. Kučera

Simulation of multivariate Gaussian random fields considering nonlinear probabilistic dependencies and multi-spatial variabilities

M.-Z. Lyu, Y.-Y. Liu, J.-B. Chen

A granular view of modelling a pandemic using the Discrete Element Method

M. Miot, N. Deng, A. Wautier, F. Nicot, R. Wan

Density relaxation in tapped granular systems: recurrent neural network model

A. D. Rosato, V. Ratnaswamy, Y. Chung, D. J. Horntrop

Simulations of poro-elastic sand structures subjected to air and water flows

J. Bomberault, Q. Rousseau, N. S. Nguyen, G. Sciarra

Effect of the grains shape on the mechanical behavior of granular material

R. D. Ferraz Burgos, H. Souli, K. Bicalho, S. R. De Melo Ferreira, F. Salvatore, J. Rech

Hydromechanical modeling of internal erosion in granular soils

P.-Y. Hicher

Shear banding in granular assemblies as an optimal dissipative structure

F. Nicot, X. Wang, A. Wautier, R. Wan, F. Darve

Novel olive stone biochar particle network for piezoresistive strain sensing in natural fiber-reinforced composites

S. Schulte, F. Lübkemann-Warwas, S. Kroll, A. Siebert-Raths

A sustainable approach to lignin as a wood binder

J. Schindler, G. Unsinn, L. Scolari, L. Zelaya-Lainez, S. Serna-Loaiza, F. Zikeli, M. Harasek, A. Friedl, J. Füssl, M. Lukacevic

A nanoindentation study on diverse technical lignins for bio-composite applications

L. Zelaya-Lainez, M. Schwaighofer, M. Königsberger, M. Lukacevic, S. Serna-Loaiza, F. Zikeli, M. Harasek, A. Friedl, J. Füssl

The livMatS fiber pavillon in the Botanic Garden Freiburg: cactus wood as inspiration – flax fibers as building material

T. Speck

Characterizing viscoelasticity of plant fiber-reinforced biocomposites through micromechanics modeling

M. Königsberger, S. Scheiner, J. Füssl

Simulating failure in plant fiber composites: Analyzing the interplay of fiber, matrix, and interface mechanics

V. Senk, M. Königsberger, M. Lukacevic, J. Füssl

Green’s function-based estimation of heat release in modified calorimetric tests

H. Höld, B. Pichler, H. Rechberger, P. Aschenbrenner, C. Hellmich

Impact of seawater on the hydration and carbonation of reactive magnesium oxide cement

X. Wang, P. Krishnan, K. Celik

Influence of the production protocol and additives on the chemo-mechanical properties of M-S-H pastes

C. Dewitte, E. Bernard, M. Neji, P. Lura

Investigating carbonation and hydration of reactive magnesia cement using advanced transmission electron microscopy

N. Elmesalami, M. J. A. Qomi, K. Celik

Dissipation and free energies of fractional-order quasi-linear hereditariness of biological tissues

G. Prezioso, M. Zingales

Finite element analysis of buckyball-shaped microscaffolds for tissue engineering

A. Kumar, V. Kumbolder, L. Pircher, J. Fernandez Perez, R. V. Balasubramanian, A. Ovsianikov, S. Scheiner, C. Hellmich

Comparative study of the bioresoption rate of PLLA/PGA scaffolds stored in different environments simulating biological intra-tissue fluid

A. Nikodem, A. Krala

Non-local model of delamination of hereditary aortic lamina

G. Prezioso, M. Zingales

Numerical research on the effect of nebulizer frequency in maxillary sinus airflow under post-surgical conditions created by virtual surgery

H. Luo, M. Miwa, S. Fujimura, H. Kanebayashi, Y. Watase, K. Hoshino, M. Nakamura, F. Matumoto, M. Yamamoto

Experimental study on joint closure and slip behavior of rock like specimens with non-penetrating long joints under uniaxial compression based on surface displacement monitoring

H. Yin, S. Wang, J.-J. Song

On the use of additional sensors during mechanical tests

S. Schmid, P. Pugacheva, C. Grosse

Rate effects on energy dissipation mechanisms in high-performance concrete

A. Carlson, E. Landis

Timelapse X-ray micro-CT imaging: adaptation to damage localisation in fresh cement mortar

P. Miarka, D. Kytýř, P. Koudelka, V. Bílek, Z. Tomičevič

Quantitative evaluation of fatigue damage in cement mortar: an in-situ approach using XCT

C. Kuang, N. Bin Jamal M, A. Michel

Visualizing corrosion development in cracked reinforced concrete using X-ray tomography

S. Robuschi, M. R. Geiker, K. Lundgren

In-plane fracturing process in dry-joint masonry walls using physics engines

A. Wang, D. Malomo

Modeling fracture in wood at the mesoscale

H. Yin, S.-A. Brown, M. Troemner, G. Cusatis

Macroscopic stress, couple stress and flux tensors for continuous and discrete heterogeneous media

J. Elias, G. Cusatis

Impact of threaded parallel couplers on the cyclic performance of reinforced concrete columns

M. Nasser, A. Ben-dahou, L. Michel, E. Ferrier, A. Gabor, R. Gardes, R. Boisson, C. Poissonnet, J.-M. Dolo

Analysis of the structural performance of the thermal bridge in building

N. H. Cuong, T.-V. Han, K. Lee

Predicting seismic performance of AFRP retrofitted RC column by applying machine learning-based fast running models

Q. B. To, J. Shin, K. Lee

Identification of pore network of clays using FIB-SEM imaging

F. Bennai, Y. Ding, J. Guyon, M. Hattab

Stress transmission in granular materials versus epidemic spreading in human societies

N. Deng, M. Miot, A. Wautier, F. Nicot, R. Wan

Swelling behavior of clayey geomaterials: insights from multiscale modeling

H. Mhamdi Alaoui, C. Zhao, W. Niu, P.-Y. Hicher

A study of moveable wave overtopponing barrier on shore

D. Won, J. Seo, S. Song

Arecibo telescope response investigation in Hurricane Maria

Z. Zhang, X. Chu, R. Abbasi, P. Ghisbain, L. Cao, J. Abruzzo

Different tornado chamber effect on vortex formation using CFD

R. Selvam

Engineered living building material (LBM) formed by binder jetting under Martian temperature and air pressure

N. Liu, S. C. Lam, W. Huang, Q. Yi, J. Qiu, F. Sun

Investigation of the factors affecting the performance of brucite as a construction material recovered from desalination reject brine

I. Singh, R. Hay, P. Krishnan, K. Celik

Utilization of desert sand with belite calcium sulfoaluminate cement

P. Krishnan, X. Wang, E. P. Bescher, K. Celik

Computation of COVID-19 fatality rates based on an aging, hereditary mechanics-inspired modelling strategy

N. Gjini, C. Hellmich, S. Scheiner

On modeling of human abdominal wall based on in vivo experiments

I. Lubowiecka, M. Troka, K. Szepietowska

A mechanobiologic model of cellular signal trasduction based on non-local stability of the primary cilium

E. Bologna, M. Zingales

Transfer fluxes, breakage, coalescence, and drop size distribution in turbulence

A. Soldati