Mechanics and electrochemistry for bulk energy storage in concrete materials & structures

F.-J. Ulm

Variations in experimental investigations of clear wood: to what extend can multiscale micromechanical models explain them?

E. Binder, M. Schweigler, T. K. Bader

Phase field method-based modeling of wood fracture

S. Pech, M. Lukacevic, J. Füssl

Characterizing a novel strand based engineered wood product for the use in construction

A. Ghazanfari, B. Kromoser

Analytical and experimental study on glulam trusses with birch plywood gusset plates

M. Debertolis, Y. Wang, T. Wang, R. Crocetti, M. Wålinder, L. Blomqvist, S. Rossi, A. Polastri, P. Rigo

Analyzing the failure probability of glued laminated timber beams across varying sizes using the finite weakest-link theory

C. Vida, S. Pech, M. Lukacevic, J. Füssl

Preparation of samples for the production of Glued Solid Timber (GST) beams according to EN 14080

B. Jashari, R. Sejdiu, L. Idrizi, A. Bajraktari

Development of microstructural heterogeneities in cementitious slurries and mortars at rest and under flow: a hypothesis for pumping blockage and material defects

A. Robisson

Experimental investigations on horizontally restrained CFRP reinforced glued laminated timber beams

L. Esser, A. Frangi

Layerwise model for the failure analysis of Cross Laminated Timber

G. Blondet, J. Bleyer, A. Lebée

Long-term behavior of novel solid wood-concrete-composite floors with combined shear connectors

A. Müllner, A. Fadai

Multi-scale multi-physics modelling of timber-concrete hybrid structures

L. Wan-Wendner

Predicting the performance of glued-in rod joints

S. K. Alavi, H. R. Valipour, M. A. Bradford

Numerical assessment of brittle failures in dowel-type timber connections loaded parallel to the grain

C. Dapieve Aquino, M. Schweigler, L. Rodrigues, J. M. Branco, T. K. Bader

The effective timber thickness for brittle failure assessment of dowel-type connections

C. Dapieve Aquino, M. Schweigler, L. Rodrigues, J. M. Branco, T. K. Bader

Single-dowel steel-to-timber connections under cyclic and high strain rate loading

K. Sroka, A. S. Cao, P. Palma

Beam-on-foundation modelling of dowel-type timber connections under cyclic loading

A. Weese, M. Schweigler, C. Sandhaas, T. K. Bader

Linearization approaches for stochastic dynamic analysis of systems endowed with non-integer order differential elements

P. Spanos

Advanced structural modeling of cross-laminated timber buildings: from elemental analysis to comprehensive structural assessment

M. Wallner-Novak, A. Fadai

A parametric framework to assess the limit states of tall timber buildings - preliminary results

A. Clerc, A. Frangi

Learnings from monitoring of realized and under-construction timber buildings

M. Dorn, C. Larsson, C. Amaddeo, O. Abdeljaber

Mechanical behaviour of timber chock structures for underground mine support

M. Dehghanipoodeh, J. Hashemi, H. Valipour, H. Masoumi

Influence of drying shrinkage on dynamic properties of cross-laminated timber

T. Furtmüller, M. Kendlbacher

Memory of flow and residual stresses: from jammed soft solids to cement pastes

E. Del Gado

Finite-element-based prediciton of moisture uptake and dry-out in CLT caused by water infiltration through end-grain surfaces

F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl

Stress development during and after kiln-drying of self-shaped Norway spruce bilayer plates

M. Naghdinasab, G. Dill-Langer, P. Grönquist

Towards a consistent description of creep in spruce

F. K. Wittel, A. Ferrara, J. M. Maas, J. Amando de Barros

Asymmetric cortex structures in recent and fossil plants: an inspiration for 3D reticulated actuators

T. Masselter, T. Speck

Numerical modelling of steel fiber reinforced concrete tunnel lining segment subjected to flexure

M. Bhadury, K. Kirupakaran, R. Gettu

Research on seismic response of prefabricated open caisson constructed by VSM method

Z. Tang, X. Liu

Hereditary mechanics-based stress prognosis in segmented tunnel linings

A. Razgordanisharahi, M. Sorgner, T. Pilgerstorfer, B. Moritz, C. Hellmich, B. Pichler

Research on evolution law of mechanical behavior of non-circular shield tunnel linings with cross-section geometry transformation

X. Liu, Z. Liu, Y. Ye, B. T. Cao, G. Meschke

Novel olive stone biochar particle network for piezoresistive strain sensing in natural fiber-reinforced composites

S. Schulte, F. Lübkemann-Warwas, S. Kroll, A. Siebert-Raths

A sustainable approach to lignin as a wood binder

J. Schindler, G. Unsinn, L. Scolari, L. Zelaya-Lainez, S. Serna-Loaiza, F. Zikeli, M. Harasek, A. Friedl, J. Füssl, M. Lukacevic

A nanoindentation study on diverse technical lignins for bio-composite applications

L. Zelaya-Lainez, M. Schwaighofer, M. Königsberger, M. Lukacevic, S. Serna-Loaiza, F. Zikeli, M. Harasek, A. Friedl, J. Füssl

The livMatS fiber pavillon in the Botanic Garden Freiburg: cactus wood as inspiration – flax fibers as building material

T. Speck

Characterizing viscoelasticity of plant fiber-reinforced biocomposites through micromechanics modeling

M. Königsberger, S. Scheiner, J. Füssl

Simulating failure in plant fiber composites: Analyzing the interplay of fiber, matrix, and interface mechanics

V. Senk, M. Königsberger, M. Lukacevic, J. Füssl

A study of moveable wave overtopponing barrier on shore

D. Won, J. Seo, S. Song

Arecibo telescope response investigation in Hurricane Maria

Z. Zhang, X. Chu, R. Abbasi, P. Ghisbain, L. Cao, J. Abruzzo

Different tornado chamber effect on vortex formation using CFD

R. Selvam

Transfer fluxes, breakage, coalescence, and drop size distribution in turbulence

A. Soldati