Constructing an isotropic damage model from coarse graining of lattice modelling results for quasi-brittle materials

J. Khoury, G. Pijaudier-Cabot

A novel DEM-based coupled 3D thermo-hydro-mechanical mesoscopic model for very-low porosity materials

M. Krzaczek, J. Tejchman

Static/dynamic response of partially saturated concrete using an improved fully coupled DEM/CFD approach

M. Krzaczek, J. Tejchman

Simulation on creep and stress relaxation of calcium silicate hydrate in microscale by discrete element method

Z. Zhang, G. Geng

Comparison of Lattice Discrete Particle Modeling (LDPM) implementations: lessons learned and future work

G. Cusatis, E. Lale, K. Yu, M. Troemner, M. Pathirage, Y. Lyu, I. Koutromanos, J. Elias, M. Stredulova, T. Xue, M. Alnaggar

Bayesian inference of constitutive law parameters for crack localization using full-field displacement measurements

A. Jafari, K. Vlachas, E. Chatzi, J. F. Unger

FE-analysis of long-term performance of an epoxy bonded anchor based on nanoindentation and CT-scan

F. Zhu, K. Bergmeister

Investigation of installation effects on the fracture behavior of adhesively bonded joints

S. TerMaath, K. Bezem, A. Handy, C. Crusenberry

Scaling the unscalable: bridging stochastic discrete mesoscale simulations with analytical modeling for the statistical strength of concrete

M. Vořechovský, V. Sadílek, M. Kučera

Simulation of multivariate Gaussian random fields considering nonlinear probabilistic dependencies and multi-spatial variabilities

M.-Z. Lyu, Y.-Y. Liu, J.-B. Chen

A granular view of modelling a pandemic using the Discrete Element Method

M. Miot, N. Deng, A. Wautier, F. Nicot, R. Wan

Density relaxation in tapped granular systems: recurrent neural network model

A. D. Rosato, V. Ratnaswamy, Y. Chung, D. J. Horntrop

Simulations of poro-elastic sand structures subjected to air and water flows

J. Bomberault, Q. Rousseau, N. S. Nguyen, G. Sciarra

Effect of the grains shape on the mechanical behavior of granular material

R. D. Ferraz Burgos, H. Souli, K. Bicalho, S. R. De Melo Ferreira, F. Salvatore, J. Rech

Hydromechanical modeling of internal erosion in granular soils

P.-Y. Hicher

Shear banding in granular assemblies as an optimal dissipative structure

F. Nicot, X. Wang, A. Wautier, R. Wan, F. Darve

Novel olive stone biochar particle network for piezoresistive strain sensing in natural fiber-reinforced composites

S. Schulte, F. Lübkemann-Warwas, S. Kroll, A. Siebert-Raths

A sustainable approach to lignin as a wood binder

J. Schindler, G. Unsinn, L. Scolari, L. Zelaya-Lainez, S. Serna-Loaiza, F. Zikeli, M. Harasek, A. Friedl, J. Füssl, M. Lukacevic

A nanoindentation study on diverse technical lignins for bio-composite applications

L. Zelaya-Lainez, M. Schwaighofer, M. Königsberger, M. Lukacevic, S. Serna-Loaiza, F. Zikeli, M. Harasek, A. Friedl, J. Füssl

The livMatS fiber pavillon in the Botanic Garden Freiburg: cactus wood as inspiration – flax fibers as building material

T. Speck

Characterizing viscoelasticity of plant fiber-reinforced biocomposites through micromechanics modeling

M. Königsberger, S. Scheiner, J. Füssl

Simulating failure in plant fiber composites: Analyzing the interplay of fiber, matrix, and interface mechanics

V. Senk, M. Königsberger, M. Lukacevic, J. Füssl

Green’s function-based estimation of heat release in modified calorimetric tests

H. Höld, B. Pichler, H. Rechberger, P. Aschenbrenner, C. Hellmich

Impact of seawater on the hydration and carbonation of reactive magnesium oxide cement

X. Wang, P. Krishnan, K. Celik

Influence of the production protocol and additives on the chemo-mechanical properties of M-S-H pastes

C. Dewitte, E. Bernard, M. Neji, P. Lura

Investigating carbonation and hydration of reactive magnesia cement using advanced transmission electron microscopy

N. Elmesalami, M. J. A. Qomi, K. Celik

Dissipation and free energies of fractional-order quasi-linear hereditariness of biological tissues

G. Prezioso, M. Zingales

Finite element analysis of buckyball-shaped microscaffolds for tissue engineering

A. Kumar, V. Kumbolder, L. Pircher, J. Fernandez Perez, R. V. Balasubramanian, A. Ovsianikov, S. Scheiner, C. Hellmich

Comparative study of the bioresoption rate of PLLA/PGA scaffolds stored in different environments simulating biological intra-tissue fluid

A. Nikodem, A. Krala

Non-local model of delamination of hereditary aortic lamina

G. Prezioso, M. Zingales

Numerical research on the effect of nebulizer frequency in maxillary sinus airflow under post-surgical conditions created by virtual surgery

H. Luo, M. Miwa, S. Fujimura, H. Kanebayashi, Y. Watase, K. Hoshino, M. Nakamura, F. Matumoto, M. Yamamoto

Experimental study on joint closure and slip behavior of rock like specimens with non-penetrating long joints under uniaxial compression based on surface displacement monitoring

H. Yin, S. Wang, J.-J. Song

On the use of additional sensors during mechanical tests

S. Schmid, P. Pugacheva, C. Grosse

Rate effects on energy dissipation mechanisms in high-performance concrete

A. Carlson, E. Landis

Timelapse X-ray micro-CT imaging: adaptation to damage localisation in fresh cement mortar

P. Miarka, D. Kytýř, P. Koudelka, V. Bílek, Z. Tomičevič

Quantitative evaluation of fatigue damage in cement mortar: an in-situ approach using XCT

C. Kuang, N. Bin Jamal M, A. Michel

Visualizing corrosion development in cracked reinforced concrete using X-ray tomography

S. Robuschi, M. R. Geiker, K. Lundgren

In-plane fracturing process in dry-joint masonry walls using physics engines

A. Wang, D. Malomo

Modeling fracture in wood at the mesoscale

H. Yin, S.-A. Brown, M. Troemner, G. Cusatis

Macroscopic stress, couple stress and flux tensors for continuous and discrete heterogeneous media

J. Elias, G. Cusatis

Impact of threaded parallel couplers on the cyclic performance of reinforced concrete columns

M. Nasser, A. Ben-dahou, L. Michel, E. Ferrier, A. Gabor, R. Gardes, R. Boisson, C. Poissonnet, J.-M. Dolo

Analysis of the structural performance of the thermal bridge in building

N. H. Cuong, T.-V. Han, K. Lee

Predicting seismic performance of AFRP retrofitted RC column by applying machine learning-based fast running models

Q. B. To, J. Shin, K. Lee

Identification of pore network of clays using FIB-SEM imaging

F. Bennai, Y. Ding, J. Guyon, M. Hattab

Stress transmission in granular materials versus epidemic spreading in human societies

N. Deng, M. Miot, A. Wautier, F. Nicot, R. Wan

Swelling behavior of clayey geomaterials: insights from multiscale modeling

H. Mhamdi Alaoui, C. Zhao, W. Niu, P.-Y. Hicher

A study of moveable wave overtopponing barrier on shore

D. Won, J. Seo, S. Song

Arecibo telescope response investigation in Hurricane Maria

Z. Zhang, X. Chu, R. Abbasi, P. Ghisbain, L. Cao, J. Abruzzo

Different tornado chamber effect on vortex formation using CFD

R. Selvam

Engineered living building material (LBM) formed by binder jetting under Martian temperature and air pressure

N. Liu, S. C. Lam, W. Huang, Q. Yi, J. Qiu, F. Sun

Investigation of the factors affecting the performance of brucite as a construction material recovered from desalination reject brine

I. Singh, R. Hay, P. Krishnan, K. Celik

Utilization of desert sand with belite calcium sulfoaluminate cement

P. Krishnan, X. Wang, E. P. Bescher, K. Celik

Computation of COVID-19 fatality rates based on an aging, hereditary mechanics-inspired modelling strategy

N. Gjini, C. Hellmich, S. Scheiner

On modeling of human abdominal wall based on in vivo experiments

I. Lubowiecka, M. Troka, K. Szepietowska

A mechanobiologic model of cellular signal trasduction based on non-local stability of the primary cilium

E. Bologna, M. Zingales

Transfer fluxes, breakage, coalescence, and drop size distribution in turbulence

A. Soldati