Linearization approaches for stochastic dynamic analysis of systems endowed with non-integer order differential elements

P. Spanos

Application of DIC method to identify the relationship between crack width and deflection in reinforced concrete beams

D. Meiramov, Y. Seo, H. Ju

Crack healing under sustained load in concrete: an experimental/numerical study

G. Di Luzio, L. Ferrara, A. Cibelli, R. Wan-Wendner

Enhancing computational efficiency in lattice discrete particle modeling for analyzing concrete failure behavior

J. Wang, J. Vorel, W. Botte, R. Wan-Wendner

Evaporation in concrete early-age maturation: multiphasic model

S. Prskalo, M. H. Gfrerer, M. Schanz

Mesoscopic simulation of corrosion-induced cracking of reinforced concrete

Y. Li, X. Ruan, H. A. Mang, B. Pichler

Novel meso-scale reactive-transport model for carbonation of OPC

M. Tang, Q. Phung, S. Seetharam, E. Coppens, J. Shao, R. Wan-Wendner

Reversible energy absorption: harnessing sequential buckling in mechanical metamaterials

A. Wadee, A. Bekele, A. Phillips, A. Koellner

On the capability of gradient elasticity models to predict instabilities in Fermi-Pasta-Ulam softening chains with short and long-range interactions

N. Challamel, C. Combescure, V. Picandet, M. Ferretti, A. Luongo

Interfacial phenomena in the lateral-torsional instability of sandwich beams

A. Wurf, Y. Frostig, O. Rabinovitch

A multi-layered structural approach to stability of orthodontic brackets

B. Azarov, O. Rabinovitch

Buckling load of an asymmetrically supported 3D column

P. Kočman, S. Schnabl

Test and design of fabricated steel I-profiles under compression

G. Langone, U. Ali, M. Shamlooei, X. Ruan, B. Rossi

Machine learning enabled landslide hazard assessment

S. J. Semnani

Slide, hold, learn: dynamic friction meets neural networks

J. Garcia-Suarez

Thermal creep of clayey soils: experiments and modelling

Z.-J. Chen, W.-Q. Feng, J.-H. Yin

Numerical analysis on negative skin friction considering creep under embankment loading

R. Liang, Z.-Y. Yin, J.-H. Yin

Nonlinear ground response analysis of liquefiable fines-dominated deposits

D. Mistry, S. Mandal, G. R. Dodagoudar

Dynamic soil-structure interaction of railway bridges: simple lumped parameter models vs. detailed coupled Finite Element – Boundary Element approaches

P. König, C. Adam

Frequency-domain fatigue life evaluation of a steel bridge considering vibrational characteristics of traffic loads

M. Ishihara, Y. Yaohua, D. Su, M. Kitahara, T. Nagayama

Impact of the modeling strategy on the dynamic response prediction of weakly coupled multi-span bridges subjected to high-speed trains

M. Mack, B. Goller, P. König, C. Adam

Residual performance estimation of a seismic-isolated bridge based on ABC model updating using seismic response data

T. Kitahara, M. Kitahara, Y. Kajita

Modal identification of a railway bridge via drive-by acceleration data from a diagnostic vehicle

C. Stoura, V. Dertimanis, C. Kossmann, E. Chatzi

New methods for data-based determination of damping factors with application on railway bridges

A. Stollwitzer, L. Bettinelli, S. Loidl, J. Fink

Advanced structural modeling of cross-laminated timber buildings: from elemental analysis to comprehensive structural assessment

M. Wallner-Novak, A. Fadai

A parametric framework to assess the limit states of tall timber buildings - preliminary results

A. Clerc, A. Frangi

Learnings from monitoring of realized and under-construction timber buildings

M. Dorn, C. Larsson, C. Amaddeo, O. Abdeljaber

Mechanical behaviour of timber chock structures for underground mine support

M. Dehghanipoodeh, J. Hashemi, H. Valipour, H. Masoumi

Influence of drying shrinkage on dynamic properties of cross-laminated timber

T. Furtmüller, M. Kendlbacher

Characterization of functionalized binder systems by means of dynamic-mechanical analysis

L. Göbel, T. Schulz, M. Ganß

Novel design of cementitious composites with the use of limestone quarry waste and silica fume

A. Kyriakidis, H. Jaber, A. Georgiou, R. Panagiotou, I. Ioannou, A. Michopoulos

Recyclable bio-synthesis hydrogel-based xoncrete (Bio-HBC): investigation of strength in successive material generations

S. C. Lam, N. Liu, W. Huang, Q. Yi, J. Qiu, F. Sun

Structural response of eco-UHPC with recycled steel fibers

M. A. Moustafa, A. Romero

Rehabilitation of deteriorated RC beams by applying external post-tension stresses: developing machine learning prediction models of ultimate limit state

A. Badnjki, T. Öztürk

Automatic differentiation and neural networks for parameter identification of hysteresis models

M. Kaltenbacher, E. Eniz Museljic, K. Roppert

Data-driven variational method for discrepancy modeling: application to nonlinear elasticity and viscoelasticity

A. Masud, S. Goraya

Influence of hemodynamics and temporal change in intracranial aneurysm shape on machine learning-based rupture prediction

Y. Watase, S. Fujimura, G. Kudo, H. Kanebayashi, T. Ishibasi, H. Ohwada, M. Yamamoto, Y. Murayama

Learning mass-spring-damper dynamics via an incomplete equation of motion, Koopman operator and topology

Z. Chen, H. Sun, W. Xiong, N. Wang

Physics Extraction Pods (PEP) find statistical closure

R. Ghanem

Statistical surrogate models on small datasets for aeroacoustic computational modeling in liners of turbofan engines

A. Sinha, C. Desceliers, C. Soize, G. Cunha

Memory of flow and residual stresses: from jammed soft solids to cement pastes

E. Del Gado

Phase-field-based chemo-mechanical modelling of corrosion-induced cracking in reinforced concrete

E. Korec, M. Jirasek, H. S. Wong, E. Martinez-Paneda

Modeling two-phase mechanical behavior in lattice discrete particle models

J. Wang, J. Vorel, W. Botte, R. Wan-Wendner

Time dependent deformations in concrete: a multi-physics multiscale model and its validation with Test Results

B. Pal, A. Ramaswamy

Stability and bifurcation in nonlinear mechanics

C. Stolz

Closed-form solutions for the elastic-plastic buckling design of external pressure vessels

V. D. Do, P. Le Grognec, P. Rohart

Propagating instabilities in collapsible tubes of nonlinear elastic materials

I. Karetsa, A. G. Stamou, I. Gavriilidis, S. A. Karamanos

Shape grammar for optimisation of perforated plates subject to buckling

E. I. Naraidoo, B. Rossi, Z. You

Exploring graph neural networks for bridges SHM

G. Marasco, S. Pakzad

A perturbation technique for natural frequency analysis of structures with cracks or other sources of additional compliance

Y. Vetyukov, R. Buchta

The challenges of surrogate modelling of modal properties

B. Kurent, N. Friedman, S. Vallely, B. Popovics, S. Schoenwald, B. Brank

Finite-element-based prediciton of moisture uptake and dry-out in CLT caused by water infiltration through end-grain surfaces

F. Brandstätter, M. Autengruber, M. Lukacevic, J. Füssl

Stress development during and after kiln-drying of self-shaped Norway spruce bilayer plates

M. Naghdinasab, G. Dill-Langer, P. Grönquist

Towards a consistent description of creep in spruce

F. K. Wittel, A. Ferrara, J. M. Maas, J. Amando de Barros

Asymmetric cortex structures in recent and fossil plants: an inspiration for 3D reticulated actuators

T. Masselter, T. Speck

Multiscale analysis of PVC geomembrane mechanical response through DEM simulations

N. Akel, A. Wautier, G. Stoltz, N. Touze, F. Nicot

Role of the mesoscale in the mechanics of clays

L. Brochard

Linear elasticity of transversely isotropic paper sheets: comprehensive validation of a multiscale continuum micromechanics model

P. M. Godinho, C. Hellmich

A framework for data-driven multiscale modeling of thermomechanical behavior of dense granular materials

R. L. Rangel, J. M. Gimenez, A. Franci

Constitutive modeling of granular soils based on the shear-transformation-zone theory

N. Guo, W. Li, Z. Yang

A temporal graph neural network-based simulator for granular materials

S. Zhao, H. Chen, J. Zhao

Elastoplastic constitutive modeling of granular materials via thermodynamics-informed neural networks

M. Su, N. Guo

A visco-hypoelastic model to describe the rate-dependent tensile responses of individual collagen fibrils

Y.-R. Chiang, O. G. Andriotis, C. Hellmich, P. J. Thurner

Collagen fibrillar pre-strain, ordering and internal stress gradients modulating small-scale biomechanics of cartilage and skin

H. S. Gupta

Heterogeneous structure and dynamics of water in a hydrated collagen microfibril

M. Vassaux

Study on the change of structural performance of RC structures building subjected to drying

R. Kurihara, N. Chijiwa

Temperature impact on the mechanical and physical properties of lining concrete in nuclear waste disposal

S. Abdo, T. Phung Quoc, R. Caspeele, S. Seetharam, R. Wan-Wendner

The influence of weather patterns and global warming on chloride ingress in concrete structures

H. Hamidane, O. Dehwah, Y. Xi, A. Messabhia, A. Ababneh

Temperature profiles of concrete members placed in different geographical regions: a guideline for installation and design of bonded anchors

I. Boumakis, T. Pregartner

Chemo-thermo-hygro-mechanical modelling of blended concretes at elevated temperatures

S. Peters, G. Meschke

Path-following for structures undergoing buckling instabilities and material damage

A. Köllner

Buckling-driven design of material extrusion manufactured stayed polymer lattices

Y. Ou, C. Völlmecke

Instability in crack propagation of layered materials using the phase field approach

S. Mrunmayee Uday, A. Rajagopal

Computational modelling of cold-formed steel beam for improved seismic performance using optimization

B. Kumar, A. N. R. Chowdhury, C. Kolay

Local buckling of compressed outstand plates: an analytical approach

J. Becque

Hybrid simulation to investigate inelastic higher-mode effects in RC structural walls

P. Paultre, M. Aftabiazar

Numerical modeling and experimental validation of novel, bioinspired seismic isolators

F. Fraternali, V. Adinolfi, G. Germano, J. de Castro Motta, G. Benzoni, A. Amendola

Pseudo-dynamic testing with sub-structuring applied to progressive collapse

J. B. Charrié, D. Bertrand, C. Desprez, S. Grange

Next generation friction damper

M. Titirla

Kinematics of hydraulic plucking in fractured rock

M. H. Gardner

Numerical modeling of the oscillation roller-subsoil interaction system

I. Paulmichl, R. Bergman

Solving inverse problems in granular mechanics with differentiable simulators

K. Kumar, Y. Choi

Molecular interactions regulate engineering properties of swelling clays

D. R. Katti, K. S. Katti

A phase field model for frictional fracture phenomena in rock masses

S. Liu, Y. Wang

Numerical modelling of steel fiber reinforced concrete tunnel lining segment subjected to flexure

M. Bhadury, K. Kirupakaran, R. Gettu

Research on seismic response of prefabricated open caisson constructed by VSM method

Z. Tang, X. Liu

Hereditary mechanics-based stress prognosis in segmented tunnel linings

A. Razgordanisharahi, M. Sorgner, T. Pilgerstorfer, B. Moritz, C. Hellmich, B. Pichler

Research on evolution law of mechanical behavior of non-circular shield tunnel linings with cross-section geometry transformation

X. Liu, Z. Liu, Y. Ye, B. T. Cao, G. Meschke

Metaball discrete element lattice boltzmann method for fluid-particle interactions with non-convex shapes

P. Zhang, S. Galindo-Torres

Comparison of three different multiphase LBM strategies for numerically obtaining the soil water retention curve of granular materials

C. M. Toffoli, R. Hosseini, J. Grabe

Resolved CFD-DEM modeling of debris flows, avalanches, and floods with arbitrary-shaped boulders and driftwood impacting structures and forests

Y. Kong, Z. Lai, J. Yin, J. Zhao

Multiscale insights into the behaviour of laterally loaded pile

A. Zhang, C. Couture, F. Collin

Modeling and application of hydraulic fracturing based on adaptive finite volume-phase field method

X. Yang, N. Guo

Investigating stretched collagen fibrils using polarization-resolved second harmonic generation microscopy

M. Harvey, R. Cisek, D. Tokarz, L. Kreplak

Mechanical behavior of individual collagen fibrils in force-controlled mechanical tests

M. Nalbach, M. Fuchs, N. Motoi, M. Rufin, O. Andriotis, G. Schitter, P. J. Thurner

Towards a real-time imaging of the assembly and disassembly of collagen nanofibers

C. Garcia-Sacristan, V. G. Gisbert, K. Klein, A. Šarić, R. Garcia

Linking the electrostatic and mechanical properties of collagen

P. Mesquida, I. Sikka, R. Dupont, E. Gachon, Z. Bai