Mechanics and electrochemistry for bulk energy storage in concrete materials & structures

F.-J. Ulm

Importance of drug order in sequential treatments against osteoporosis involving denosumab and romosozumab

F. J. Martínez Reina, R. Ruiz Lozano, J. L. Calvo Gallego, P. Pivonka

Bone micro-mechanobiology of implant-femur interaction: a multi method approach combing CT and SASTT imaging with analytical mechanics

L. Pircher, T. A. Grünewald, H. Lichtenegger, M. Liebi, A. Weinberg, C. Hellmich

Deep-learning based framework for automated mechanobiological analysis of bone response using micro-CT imaging data of mouse tibiae

P. Pivonka, A. Lagzouli, N. Muhl-Castoldi, V. Sansalone, D. M. Cooper, A. Othmani

Digital volume correlation resolves load-induced high articular strain foci in osteoarthritis-prone joints

A. Sharma, L. Evans, A. Parmenter, J. Brunet, K. Madi, K. Staines, P. Lee, A. Pitsillides

A multiscale bone cell population model based on a 2-state receptor model accounting for cellular responsiveness to PTH

C. Modiz, N. Muhl-Castoldi, S. Martelli, S. Scheiner, V. Sansalone, P. Pivonka

Use of a hysteretic device in vibration mitigation (Keynote Lecture)

F. Vestroni, P. Casini

A theoretical and experimental study on the optimal design of Sliding Tuned Liquid Column Dampers for structural vibration control (Keynote Lecture)

C. Masnata, C. Adam, A. Pirrotta

Implementation of tuned mass damper control concept for integrated seismic and energetic retrofit of existing buildings

M. Basili, M. De Angelis, F. Busato

A fundamental study on active vibration control of cross-laminated timber members

N. Hirschfeldt, T. Furtmüller, C. Adam

Nanoscale modeling for structural vibration control

R. Barretta, R. Luciano, F. Marotti de Sciarra, M. S. Vaccaro

Efficient approaches for simulating large deformation problems

J. P. Hambleton

Particle finite element method for large deformation simulation of geotechnical hazards under fluid-solid interaction

W. Sun, W. Zhang, W.-H. Yuan

Implicit SNS-PFEM with dual mortar method for thermo-hydro-mechanical large deformation problems

X.-H. Wu, Q. Zhang, W.-Q. Feng, Z.-Y. Yin, H.-C. Fang

Hybrid FEM and Peridynamic simulation of forerunning fracture in porous media

T. Ni, B. Schrefler

Modelling multi-physical field coupling process of rock by discretized virtual internal bonds

Z. Zhang

Microfiber-reinforced bentonite clay for geological repositories of nuclear spent fuel: multiphysical laboratory tests and computational modeling

A. Azzam, M. Rahmani, Y.-R. Kim, J. Eun, S. Kim

Creep and shrinkage of a limestone calcined clay cement paste determined in hourly performed three-minute creep tests

S. J. Schmid, O. Lahayne, L. Zelaya, B. Pichler

Basic creep properties of the hydration products in mature slag-based CEM II concretes

M. Sorgner, R. Díaz Flores, T. Pilgerstorfer, B. Moritz, B. Pichler, C. Hellmich

Early-age elastic and creep properties of graphene oxide cement paste determined by three-minute-long creep tests

M. Shahid, S. J. Schmid, O. Lahayne, A. Robisson, B. Pichler

Influence of cracking and viscoelasticity on nonlinear creep of concrete

R. Díaz Flores, C. Hellmich, B. Pichler

Long-term concrete strain measurements of large-scale experiments using vibrating wire strain gauges

W. Bachofner, J. Kollegger

Characterization of time-dependent restrained shrinkage in thin ultra-high performance concrete overlays

D. Daneshvar, P. Preinstorfer, K. Deix, B. Shafei, A. Robisson

Variations in experimental investigations of clear wood: to what extend can multiscale micromechanical models explain them?

E. Binder, M. Schweigler, T. K. Bader

Phase field method-based modeling of wood fracture

S. Pech, M. Lukacevic, J. Füssl

Characterizing a novel strand based engineered wood product for the use in construction

A. Ghazanfari, B. Kromoser

Analytical and experimental study on glulam trusses with birch plywood gusset plates

M. Debertolis, Y. Wang, T. Wang, R. Crocetti, M. Wålinder, L. Blomqvist, S. Rossi, A. Polastri, P. Rigo

Analyzing the failure probability of glued laminated timber beams across varying sizes using the finite weakest-link theory

C. Vida, S. Pech, M. Lukacevic, J. Füssl

Preparation of samples for the production of Glued Solid Timber (GST) beams according to EN 14080

B. Jashari, R. Sejdiu, L. Idrizi, A. Bajraktari

An approximate analytical technique for transient response PDF of a linear oscillator under a non-Gaussian colored noise

T. Tsuchida, K. Kimura

Demonstration of continuous gamma process for site specific structural capacity quantification for aging infrastructure

T. Micic

Uncertainty quantification on seismic response of an RC bridge pier considering varying material properties

M. Kitahara, R. Kurihara

Structural reliability of complex nonlinear systems exposed to evolutionary stochastic excitation

I. P. Mitseas, M. Beer

Probabilistic model selection of the Ground Motion Prediction Models for Northern South America

B. Salazar, A. Ortiz, J. Marulanda

Analysis of the behavior of the structure under internal ANFO explosion

S. Ko, S. Choi, J. J. Kim, W. Kwon

Bay Bridge

J. S Plachta

Development of microstructural heterogeneities in cementitious slurries and mortars at rest and under flow: a hypothesis for pumping blockage and material defects

A. Robisson

An elasto-plastic finite-deformation micropolar material point method for strain localisation problems

T. J. O'Hare, P. A. Gourgiotis, W. M. Coombs, C. E. Augarde

Strain localization analysis of an infinitesimal micropolar elastoplastic constitutive model rooted in critical state soil mechanics

P. Hofer, M. Neuner, P. Gamnitzer, G. Hofstetter

A return-free plastic integration for mixed control problems and its applications in elastoplasticity of materials

L.-W. Liu, P.-H. Chen

Finite element analysis of shear failure in sand using micropolar hypoplasticity

K. V. Basche, M. Schreter-Fleischhacker, G. Medicus, M. Neuner, G. Hofstetter

Efficient algorithmic formulation of trabecular bone remodelling using a two-scale model of trabecular bone

A. Papastavrou, P. Pivonka, P. Steinmann

In silico-aided design of functionally graded porous scaffolds for bone tissue engineering

P. Posabella, M. Heljak, M. Costantini, W. Święszkowski

Osteogenic control of bone mechanobiology through BMP loaded interlocked scaffolds

K. Katti, S. Jaswandkar, K. Kundu, D. Katti

The efficient numerical tool to simulate the phenomenon of trabecular bone remodeling for multiple load cases

M. Nowak, J. Polak

Vertical vibration control of a cross-laminated timber plate through fluid inerter

M. Chillemi, T. Furtmüller, C. Adam, A. Pirrotta

Stochastic parameter identification of a fluid inerter-based control device

B. Goller, M. Chillemi, T. Furtmüller, C. Adam

Water-tank metabarriers for seismic surface waves attenuation

G. Failla, A. F. Russillo

Thermoacoustic Fano-based bistable energy converters: a novel paradigm of thermodynamic cycles for waste-energy recovery

S. Buonocore, A. Hubarevich, F. De Angelis

Experimental investigations on horizontally restrained CFRP reinforced glued laminated timber beams

L. Esser, A. Frangi

Layerwise model for the failure analysis of Cross Laminated Timber

G. Blondet, J. Bleyer, A. Lebée

Long-term behavior of novel solid wood-concrete-composite floors with combined shear connectors

A. Müllner, A. Fadai

Multi-scale multi-physics modelling of timber-concrete hybrid structures

L. Wan-Wendner

Homogenization of weakly nonlinear phenomena in electroactive fluid saturated porous media with multiple time scales

E. Rohan, V. Lukeš, F. Moravcová, R. Cimrman

Impact of various uncertainties on the modeling of sorption-induced deformations

J. Leng, P. Dangla, M. Vandamme

Study of crystallization pressure by molecular simulation

B. Mahmoud Hawchar, T. Honorio, M. Vandamme, F. Osselin, J.-M. Pereira, L. Brochard

Towards a DFT approach to the mechanical properties of solids

A. Kahlal, V. Sermoud, G. Pijaudier-Cabot, D. Grégoire, C. Miqueu

Stability of unlined circular tunnel in layered rock masses

S. Sahu, J. P. Sahoo, G. Tiwari

Multiphase modeling of ground freezing-shotcrete interaction in tunneling construction

R. J. Williams M., G. Meschke

A deep learning-based method for detecting joints and evaluating segment deformation in shield tunnels

B. Zhang, W. Song, X. Liu

Will a concept of pre-structure be applicable to tunnels in squeezing ground?

Y. Yuan, B. Shi, Y. He, J.-L. Zhang

Integrated evaluation of blast loads on reinforced concrete structures: a strength and ductility approaches

Y. Kim, S. Kim, J. Shin

Machine-learning based optimum retrofit scheme for reinforced concrete frame structures: a case study on 1980s school buildings

S. Kim, Y. Kim, J. Shin

Neural network-driven representation and computational particle mechanics via signed distance fields

Z. Lai, L. Huang

Shape-based vision system optimized for seismic damage detections of nonstructural components in buildings

I. Choi, B. K. Oh, H. W. Oh

A machine learning approach for offshore wind turbine tower fatigue and fragility analysis

J. McAuliffe, S. Baisthakur, B. Fitzgerald

A study on optimal sensor placement of multi-linked floating offshore structure for prediction accuracy improvement of structural response using distortion base mode method

K. Sim, K. Lee, M. Ki

Advancing wind farm fatigue analysis: insights from high-fidelity modelling and machine learning

A. Alazhare, B. Fitzgerald

Blade pitch control of floating offshore wind turbines for mitigating corrosion fatigue deterioration and enhancing structural reliability

Y. Pu, J. Zhang, Y. Dong, B. Fitzgerald

Phase field simulation of hydrogen-assisted fatigue

C. Cui, E. Martínez-Pañeda

Robust and efficient implementation of generalized continuum models based on automatic differentiation with hyper-dual numbers

A. Dummer, M. Neuner, P. Gamnitzer, G. Hofstetter

Homogenized post-peak response of composites from phase-field fracture simulation at microscale

S. Sagar, S. R. Chowdhury

Comparison between block preconditioner and monolithic preconditioner for iterative solution of coupled multi-field problems from generalized continuum models

N. Alkmim, P. Gamnitzer, G. Hofstetter

Microstructural characterization of fiber-reinforced cementitious composites using micro-CT measurements and evaluation of their mechanical behavior using simulations

J. Suh, T.-S. Han

Multifidelity reliability and sensitivity analysis

C. Proppe

Active mass dampers for cross laminated timber floors - comparison between experimental and numerical investigations

T. Hillberger, T. Furtmüller, R. Maderebner

Experimental investigation of track nonlinear energy sink with rotational mass using real-time hybrid simulation

C.-M. Chang, T.-L. Kao

An investigation of the behavior of reinforced concrete coupling beams

D. Bhunia, R. P. West, J. K. Bhaskar

On the effects of the precritical nonlinearities on buckling of flexible systems (Keynote Lecture)

A. Luongo, M. Ferretti

Variational criteria for extreme values of the stiffness of proportionally loaded structures as solutions of an inverse problem (Keynote Lecture)

H. A. Mang

The behaviour of thin composite plates with extension-bending coupling under harmonic compressive load

T. Kubiak, M. Bohlooly Fotovat

Large displacement analysis of angle-ply beam-type structures considering shear deformation effects

D. Banić, G. Turkalj, D. Lanc

Multi-scale analyses on interfacial behavior between normal concrete (NC) and ultra-high performance concrete (UHPC)

B. Zhang, J. Yu, W. Chen, H. Liu

A super-ellipsoid convex model based reliability analysis of rock tunnel with rock properties modelled via mixed uncertainty models based on available data

S. Maurya, G. Tiwari

Thermal stresses in concrete beams as a result of multiscale constraints

H. Wang, Y. Yuan, H. Mang, Q. Ai, X. Huang, B. Pichler

3D numerical modelling of inter-seasonal heat harvesting of a geothermal road in the UK

J. Lyu, N. Makasis, L. Cui, B. Cao

Utilization of phase change materials in the support structure of geothermal tunnel: efficacy in geothermal hazard mitigating and heat energy storage

Q. Wang, H. Wang, J.-L. Zhang, E. Koenders, Y. Yuan

SPH implementation to large deformation of granular mass using an advanced hypoplastic constitutive model

C. Zhu, W. Wu, C. Peng, S. Wang

Numerical and analytical analysis of fracture closure modes and their importance in data interpretations

A. Dahi Taleghani, R. Wang

A pioneering framework for accurate reconstruction of arbitrary granular materials

R. Li, Z. Yin

A novel clump-based breakage model in discrete element method for simulating crushable aggregates

C. Xu, Z.-Y. Yin, P. Wang

Predicting the performance of glued-in rod joints

S. K. Alavi, H. R. Valipour, M. A. Bradford

Numerical assessment of brittle failures in dowel-type timber connections loaded parallel to the grain

C. Dapieve Aquino, M. Schweigler, L. Rodrigues, J. M. Branco, T. K. Bader

The effective timber thickness for brittle failure assessment of dowel-type connections

C. Dapieve Aquino, M. Schweigler, L. Rodrigues, J. M. Branco, T. K. Bader

Single-dowel steel-to-timber connections under cyclic and high strain rate loading

K. Sroka, A. S. Cao, P. Palma

Beam-on-foundation modelling of dowel-type timber connections under cyclic loading

A. Weese, M. Schweigler, C. Sandhaas, T. K. Bader