Conference Agenda

Wood material science and the strength of computer simulations - theory, model, simulation, test and experimental evidence

S. Svensson

The influence of moisture transport models on the mechanical behavior of wood

S. Huč, U. Rodman, S. Svensson

Thermodynamic modeling of kiln wood drying for energy efficiency and sustainability in forestry

E. Hajian, J. A. J. Huber, L. Hansson

Quantification of poplar veneer deformation for modeling wood drying processes

C. Kachouh, J. Viguier, S. Girardon, T. Marcel-Mathey, L. Denaud

Multiphase modeling of wood decay under fungal attack supported by LFNMR experiments

R. Dsouza, T. Belt, S. Fortino

Development and validation of a novel two-step hygroscopic deformation model for wood

B. Sandor, J. Tieben, R. Griffith

Comparing DVC tools for quantifying hygroscopic deformation in lignocellulosic tissues

K. Ulrich, F. Scheckenbach, T. M. Wong, B. Zeller-Plumhoff, T. Masselter, T. Speck, L. Hesse

Modelling approaches for innovative tailored laminated timber

E. Serrano, H. Danielsson, P. Persson

Evaluation of stiffness properties of engineered wood products comparing resonance frequencies from experiments and finite element models

A. Olsson, A. Göthberg, M. Schweigler, M. Hu

Detection of impaired adhesive bondline in CLT using experimental modal analysis and ultrasonic technique

P. Nop, V. Sebera, J. Tippner, J. Zlámal

Investigation of imperfections in adhesive bondline in CLT using numerical modal analysis

V. Sebera, P. Nop, J. Tippner

Seismic modelling approaches for platform type CLT structures

B. Azinović, L. Naumovski, T. Pazlar

Potential of hybrid Aspen and Poplar wood vibration damping properties

M. Irbe, A. Pupurs

Application of complex material models in timber engineering design: illustration on curved cross-laminated timber and timber-concrete composite slabs

P. Grönquist

Insights from a unified database of Norway spruce’s moisture-dependent orthotropic rheology

J. M. Maas, F. K. Wittel

A cellular model for the moisture-dependent rheonomic behavior of Norway spruce at the tissue scale

A. Ferrara, J. M. Maas, J. Amando de Barros, F. K. Wittel

Moisture-dependent rheological behavior of Norway spruce on the tissue scale

A. Ferrara, F. K. Wittel

Hierarchical multiscale modeling of mass transport in wood: linking molecular and continuum levels

K. Hackenstrass, N. Tabudlong Jonasson, H. Yu, S. Florisson, M. Wohlert

Transport properties of pristine and transparent wood predicted by means of multiscale modeling inspired by continuum micromechanics

S. Scheiner, A. Thirion, M. Königsberger, C. Hellmich, J. Füssl

Mechanical properties of adhesive-free CLT with hardwood dowels for numerical prediction: experimental investigations on dowels and DCLT elements

S. Mansour, P. J. McGetrick

The effect of slip stiffness on the behaviour of timber-concrete composite slabs

D. B. Merczel, M. Tantawi, J. Lógó

Numerical modelling of adhesively bonded beech joints - effects of surface preparation methods

B. Azinović, L. Naumovski, M. Capuder, T. Pazlar

A finite element model for steel-CLT deconstructable connections

F. O'Donnell, B. Chen, S. Bhandari, J. Hajjar

Strategies for ductile connections in mid-rise timber buildings in context of a circular economy

A. Gerger, A. Fadai

Energetic formulations to simulate moisture-induced and mixed mode fracture in wood by the Representative Crack Element framework

D. Konopka, M. May, D. Supriatna, J. Storm, M. Kaliske

Application of the connector beam lattice model for multiscale simulation of wood durability

S.-A. Brown, H. Yin, E. Lale, M. Troemner, G. Cusatis

Deformation analysis of cross-laminated timber beams subjected to initial strains induced by moisture content variations

H. Wimmer, A. Tessler, K. Nachbagauer

Numerical framework to assess the short- and long-term response of post-tensioned timber elements

C. Melchor-Placencia, C. Málaga-Chuquitaype

Influence of the load level on the long-term behaviour of timber beams

T. Hozjan, U. Rodman, S. Huč

Comparative analysis of a comprehensive pyrolysis model and Eurocode 5 in evaluating fire resistance of timber components

B. Sandor, S. Polleres

Development of a technical specification on numerical design of timber structures – verification and validation of numerical models, analyses, and results

J. Töpler, A. S. Cao

Methodology and case study on transferring the design methods from the Eurocodes to numerical design calculations with direct resistance check

J. Töpler, G. Hochreiner

Bearing strength perpendicular to grain – EC5 model revised for birch wood

P. Schlotzhauer, S. Raskop, H. Militz

Stability of wood pillars: Brazilian standards vs. experimental results

R. M. Brasil, A. M. Wahrhaftig

Recent developments in the modelling of connections with dowel-type fasteners in timber structures with Beam-on-Foundation models

T. K. Bader, M. Schweigler

Numerical and experimental analysis of beech wood shear lap joints under varying climatic conditions using thick 2K-epoxy and polymer mortar interfaces

P. L. Ditzel, C. Tapia Camú, P. Grönquist

Numerical assessment of brittle failures in dowel-type timber connections under in-plane multiaxial loading and bending moment

C. D. Aquino, M. Schweigler, L. G. Rodrigues, L. C. da Silva, J. M. Branco, T. K. Bader

Numerical and fracture mechanics-based simulation of crack propagation in moment-resisting dowelled timber connections

C. D. Aquino, L. C. da Silva, M. Schweigler, L. G. Rodrigues, J. M. Branco, T. K. Bader

Hygro-thermo-mechanical behavior of a scaled timber composite (softwood and hardwood) column-to-slab connection: experimental and numerical study.

R. N. Fararoni Platas, S. Gambarelli, J. Bosnjak

Numerical investigations on timber peg joints

J. Pełczyński, K. Wasilewski

Stiffness, ductility and load-bearing capacity of nails in TCC connections using a combination of beam on foundation model and static equilibrium of fasteners in deformed state – analytical, numerical and experimental study

J. Pyykkö, S. Svensson

Numerical study of moisture profiles in dowel timber connections

W. Mmari, M. Schweigler, B. Johannesson, R. Lemaître

3D and 4D X-ray CT imaging for static and dynamic testing of wood to feed computational research

J. Van den Bulcke, T. Gheyle, B. Chen, I. Josipovic, M. Boone, L. Van Hoorebeke, J. Van Acker

A study on the compression behavior of wood using 4D X-ray μCT and digital image correlation

B. Chen, T. Gheyle, I. Josipovic, M. Boone, W. Van Paepegem, J. Van Acker, J. Van den Bulcke

X-ray tomography-based simulation of the plastic behaviour of scratched pine wood

S. Fortino, H. Ronkainen, V. Balobanov, T. Harjupatana, A. Miettinen

Effect of cell wall architecture and heterogeneity on elastic properties of softwoods and hardwoods: microstructure generation and finite element modeling

J. Hofegger, M. Königsberger, S. Pech, J. Füssl

Exploring the impact of delignification and polymer infiltration on wood cell wall properties using Nanoindentation

J. Schindler, M. Königsberger, L. Zelaya-Lainez, A. Mariani, D. Nuvoli, J. Füssl

Micromechanics modeling of pulp fibers and validation with single fiber tensile Experiments

G. Unsinn, M. Königsberger, L. Zelaya-Lainez, T. Harter, U. Hirn, J. Füssl, M. Lukacevic

Transverse elastic wood properties of miniature wood samples using dynamic modal tests – possibilities and limitations

M. Perstorper

Uncertainties and challenges concerning the determination of input parameters for modelling

C. Sandhaas

Modeling of wood forming by use of non-linear finite-element technologies

R. Fleischhauer, D. P. Rahmi, M. Kaliske

An anisotropic plastic-brittle constitutive model: spruce wood under various loading scenarios

D. P. Rahmi, R. Fleischhauer, M. Kaliske

Numerical modeling and sensitivity analysis of unidirectional strand board (USB) for structural applications

A. Ghazanfari, B. Kromoser

Approximatioh to the explicit formulation of the Tsai-Hill criterion

R. Quinteros-Mayne, I. de Arteaga Jordá, J. M. Cabrero Ballarín

Real time prediction of NVH behavior of steel-wood hybrid structures in automotive engineering by Model Order Reduction

M. Wagner, A. Pasquale, A. Schmid, S. R. Iturra, F. Chinesta, F. Feist

Characterization and reconstruction of the statistically inhomogeneous mesostructure of Moso bamboo

L. Speichinger, R. Förster, T. Böhlke

Multiscale modeling of the elastic properties of bamboo culm

C. Dai, M. Mokarizadehhaghighishirazi, M. Khajouei-Nezhad

Reliable micromechanical data of wood: a critical analysis on micropillar compression

J. O. Amando de Barros, F. K. Wittel

Combination of experiments and multiscale micromechanical models for stiffness of hardwood

E. Binder, A. Thirion, Z. Shehadeh, K. Markus, T. K. Bader

Deep Eshelby Network: an AI framework for multiscale mean-field homogenization with arbitrary inclusion shapes

M. Schwaighofer, M. Königsberger, S. Pech, M. Lukacevic, J. Füssl

Quantifying uncertainty in mode I wood fracture using likelihood-based methods

J. Jonasson, J. Lindström, H. Danielsson, E. Serrano

Macroscale modeling of wood fracture utilizing the phase field approach

S. Pech, M. Lukacevic, J. Füssl

Numerical modelling of stitching-enhanced wood-based laminates

M. Wagner, G. Bauman, F. Feist

The effect of loading rate and moisture content on the fracture toughness of spruce wood

M. Hassan Vand, V. Sebera, D. Děcký

Characterization of mode II fracture behaviour of hybrid spruce-beech glue lines: a non-symmetric ENF-test as foundation for a cohesive zone model

K. Zechmeister, M. Riegler, M. Derbas, B. Kromoser

Hybrid numerical-analytical homogenisation of wooden board stiffness capturing intra-stem microstructural variations across multiple scales

A. Thirion, M. Königsberger, S. Pech, J. Füssl

Micromechanics of transparent wood: how delignification and polymer infiltration affect wood stiffness

M. Königsberger, S. Scheiner, J. Füssl

Optical scattering study in transparent wood using numerical simulation, analytical study and deep learning

B. Chen, S. Popov, L. Berglund

From paper to FE fiber network model: a multiscale approach to understand paper mechanics

G. Kloppenburg, C. Czibula, U. Hirn, J. Neumann, J.-W. Simon

A design verification concept for paper and cellulose-based materials in load-bearing applications

H. H. Hoffmann, M. Baitinger, M. A. Kraus

Failure modelling of timber frame diaphragms using a sheathing-to-framing connection model based on orthotropic multilinear damage evolution laws

D. Byloos, T. Engelen, B. Vandoren

Failure analysis of Cross Laminated Timbers using an efficient layerwise model

G. Blondet, J. Bleyer, A. Lebée

Influence of segmented discrete modeling and interaction types on simulating multilayered OSB wall elements

J. Belz, B. Kromoser

Numerical analysis of the single cube apparatus for shear testing applied on Norway spruce in the transverse plane

T. Király, J. Garab, L. Bejó

A numerical study of a wood-based energy absorbing structure inspired by nature

F. Feist, M. Pramreiter, M. Wagner, G. Baumann, U. Müller

A volumetric growth material model for naturally shaped timber models based on GSBIGA

F. Spahn, F. Kolisch, K. Moreno Gata, M. Trautz, S. Klinkel

Integrating nondestructive diagnostics and biomechanical modeling to assess urban tree stability: A case study on sequoiadendron giganteum

C. Linhares, R. Golçalves, M. Ruy, A. Dias, L. Martins, S. Knapic

The hyped concept of curved-plank structures (“Bohlenträger”) - primarily a matter of nonlinearities and adequate structural modelling

G. Hochreiner

Numerical analysis of glulam beams using advanced one-dimensional finite elements

R. Augello, E. Carrera

Ensuring constant structural reliability for glued laminated timber beams across various sizes using the finite weakest-link theory

C. Vida, M. Lukacevic, S. Pech, J. Füssl

Strip-laminated timber from recovered glulam beams – test results and challenges

A. Weidenhiller, A. Foller

Predicting the bending strength of GLT members with holes and notches – a FEM-based engineering approach

M. Detter, G. Hochreiner, J. Füssl

Experimental investigations and numerical modelling of CFRP reinforced GLT members to investigate catenary action in post and beam timber buildings

L. Esser, A. Frangi

Determination of 3D fiber orientations in timber boards using X-ray CT scanning and deep learning

O. Abdeljaber, A. Olsson, M. Hu

FE modeling of timber boards integrating 3D fiber orientation data obtained from X-ray CT and deep learning

M. Hu, O. Abdeljaber, A. Olsson, W. Schirén

Predicting localized bending stiffness of sawn timber using finite elements modelling after 3D fiber orientation reconstruction: a case study on a Douglas fir board

H. Penvern, G. Pot, J. Viguier

AI-based knot detection in CT scans of beech logs

J. Dienert, M. Huber, T. Brox, F. Brüchert

A method for optimising the positioning of boards in glulam-like products

A. Weese, M. Frese, P. Dietsch

Acoustic emission-based deduction of micromechanical mechanisms during cross-grain fracture: experiments to support multi-scale modeling

E. N. Landis, P. Belalpour Dastjerdi