Index of Authors
A list of all persons who contribute to the sessions of this conference. Please select a letter below to list all persons with the corresponding last name. Select the presentation in the right-hand column to access session and presentation details.
| Author(s) | Organization(s) | Session |
|---|---|---|
| ABELA, Edward | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| AGOSTINELLI, Thomas | Università Politecnica delle Marche, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter |
| AMBU, Rita | Università degli Studi di Cagliari | Methods for Medical Applications 1 |
| ANTINOZZI, Sara | Department of Civil Engineering, University of Salerno, Fisciano, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| ANTONIELLO, Andrea | Department of Industrial Engineering, University of Salerno, Italy | Virtual Prototyping & Digital Twin |
| APRATO, Alessandro | Department of Surgical Sciences, University of Turin, Turin, 10126, Italy | Methods for Medical Applications 3 |
| APREA, Marco | Vittoria Tyre S.p.A; Università degli Studi di Napoli Federico II | Product Design & Engineering 1 |
| ARUANNO, Beatrice | University of Pisa, Italy; Univrsity of Pisa, Italy | Extended Reality 2 + Engineering Education Presenter Extended Reality 2 + Engineering Education |
| ASAR, Shehab Amr Hassan Elsayed | Politecnico di Milano, Italy | Geometric Modeling & Processing |
| AUDISIO, Andrea | Pediatric Orthopaedics and Traumatology, Regina Margherita Children's Hospital, Turin, 10126, Italy | Methods for Medical Applications 3 |
| AVOGADRI, Simone | University of Bergamo, Viale Marconi 5, 24044 Dalmine, BG, Italy | Product Design & Engineering 1 Presenter |
| BACCIAGLIA, Antonio | Department of Industrial Engineering (DIN), University of Bologna, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Presenter |
| BAGGETTA, Mario | Department of Mechanical Engineering, University of Genoa, 16145 Genoa, Italy; Department of Mechanical, Energy, Management and Transportation Engineering (DIME), University of Genova, Italy | Product Design & Engineering 2 Product Design & Engineering 2 |
| BAIAMONTE, Giuliana | Electric, Electronics and Computer Engineering Department, University of Catania, Catania, 95125, Italy | Additive Manufacturing Methods For Medical Applications 2 Presenter Product Design & Engineering 3 + Design Methods for Marine Engineering |
| BALZAN, Emmanuel | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| BARBERI, Emmanuele | Department of Engineering, University of Messina, Messina, Italy | Methods For Medical Applications 2 |
| BARBIERI, Loris | Department of Mechanical, Energy and Management Engineering (DIMEG), University of Calabria, P. Bucci 46C, 87036, Rende, Cosenza, Italy; University of Calabria, Italy | Extended Reality 2 + Engineering Education Product Design & Engineering 3 + Design Methods for Marine Engineering Virtual Prototyping & Digital Twin |
| BARBOSA, Gustavo Franco | Universidade Federal de São Carlos, São Carlos 13565-905, Brazil | Additive Manufacturing |
| BARONE, Sandro | University of Pisa, Italy | Extended Reality 2 + Engineering Education |
| BARONIO, Gabriele | Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| BAZOO, Danial | University of Modena and Reggio Emilia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| BAZZANO, Gaetano | VISHAY Semiconductor Italiana S.P.A., Italy | Product Design & Engineering 2 |
| BECATTINI, Niccolò | Politecnico di Milano, Italy | Design for Sustainability Presenter |
| BECHERINI, Marco | University of Bergamo, Italy | Methods for Medical Applications 3 |
| BELTRAMI, Daniele | Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| BENEDETTO, Filippo | Division of Vascular Surgery, Department of Biomorphological Sciences, University of Messina, Messina, Italy | Methods For Medical Applications 2 |
| BERSELLI, Giovanni | Department of Mechanical Engineering, University of Genoa, 16145 Genoa, Italy; Department of Mechanical, Energy, Management and Transportation Engineering (DIME), University of Genova, Italy; Advanced Robotics Department (ADVR), Istituto Italiano di Tecnologia (IIT), Genova, Italy | Product Design & Engineering 2 Product Design & Engineering 2 Presenter |
| BERTOLINI, Michele | Università degli Studi di Cagliari; Politecnico di Milano | Methods for Medical Applications 1 Presenter |
| BIANCONI, Francesco | Department of Engineering, University of Perugia, 06125, Perugia, Italy | Additive Manufacturing Presenter |
| BICI, Michele | Department of Mechanical and Aerospace Engineering, Sapienza Università di Roma, via Eudossiana 18, 00184 Rome, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Presenter |
| BILANCIA, Pietro | Department of Sciences and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, Italy. | Product Design & Engineering 2 Presenter |
| BILE, Alessandro | Department of Basic and Applied Sciences for Engineering, Sapienza Università di Roma, Via A. Scarpa 16, 00161 Rome, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Presenter 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| BODINI, Ileana | Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| BORDEGONI, Monica | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Product Design & Engineering 2 |
| BOUISSIERE, François | Airbus SAS, Toulouse | Product Design & Engineering 1 |
| BOVARA, Federica | Università Politecnica delle Marche, Italy | Design for Sustainability |
| BROGI, Margherita | Department of Industrial Engineering, University of Florence, Florence, Italy | Methods for Medical Applications 3 Presenter |
| BRUNO, Fabio | Department of Mechanical, Energy and Management Engineering (DIMEG), University of Calabria, P. Bucci 46C, 87036, Rende, Cosenza, Italy; University of Calabria, Italy | Extended Reality 2 + Engineering Education Product Design & Engineering 3 + Design Methods for Marine Engineering Virtual Prototyping & Digital Twin |
| BRUNZINI, Agnese | Department of Theoretical and Applied Sciences, eCampus University, Italy | Human Factors & Ergonomics 1 Presenter |
| BUHAGIAR, Nathalie | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| BUONAMICI, Francesco | Department of Industrial Engineering of Florence, University of Florence,Via di S. Marta 3, 50139 Firenze, Italy; Università di Firenze, Italy | Geometric Modeling & Processing Presenter Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| BURRIESCI, Gaetano | Università di Palermo, Italy; Group of Bioengineering & Medical Devices, Ri.MED Foundation,Via Bandiera 11, 90133 Palermo, Italy; UCL Mechanical Engineering, University College London, Torrington Place, London WC1E 7JE, United Kingdom | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| CALABRETTA, Michele | Universita' di Messina; Università degli Studi di Messina, Italy | Geometric Modeling & Processing Product Design & Engineering 2 |
| CALÌ, Michele | Electric, Electronics and Computer Engineering Department, University of Catania, Italy; Università degli Studi di Catania, Piazza Università, 2 - 95131 Catania - Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Product Design & Engineering 3 + Design Methods for Marine Engineering Virtual Prototyping & Digital Twin |
| CALI', Michele | Electric, Electronics and Computer Engineering Department, University of Catania, Catania, 95125, Italy | Additive Manufacturing |
| CALI', Michele | Electric, Electronics and Computer Engineering Department, University of Catania, Catania, Italy | Methods For Medical Applications 2 |
| CALIFANO, Rosaria | University of Salerno, Italy | Human Factors & Ergonomics 2 |
| CALZONE, Nicolas | Università degli Studi della Basilicata, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| CAMBON, Guillaume | Airbus SAS, Toulouse | Product Design & Engineering 1 |
| CAMPANA, Francesca | Department of Mechanical and Aerospace Engineering, Sapienza Università di Roma, via Eudossiana 18, 00184 Rome, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| CANTARELLI, Simone | Università degli studi di Bologna, Italy | Extended Reality 1 |
| CAPPETTI, Nicola | Department of Industrial Engineering, University of Salerno, Fisciano, Italy; Department of Industrial Engineering; University of Salerno, Via Giovanni Paolo II, 132, 84084, Fisciano (SA), Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Methods For Medical Applications 2 Virtual Prototyping & Digital Twin |
| CARAGIULI, Manila | Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, Italy | Human Factors & Ergonomics 1 Methods for Medical Applications 3 Presenter |
| CARFAGNI, Monica | Department of Industrial Engineering of Florence, Via di S. Marta 3, 50139 Florence, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 Methods for Medical Applications 3 |
| CARULLI, Marina | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter Product Design & Engineering 2 Presenter |
| CARUSO, Giandomenico | Politecnico di Milano, Italy | Geometric Modeling & Processing Presenter |
| CASCINELLI, Giorgio | Studio Arcadia Srl, Piombino, Italy | Human Factors & Ergonomics 1 |
| CASCINI, Gaetano | Department of Mechanical Engineering, Politecnico di Milano, Via Giuseppe La Masa, 1 - 20156 Milan, Italy | Extended Reality 1 |
| CATALANOTTI, Giuseppe | Università degli Studi di Enna "KORE" | Methods For Medical Applications 2 |
| CAVEDONI, Andrea | TrackOne Srl, Modena, Italy. | Product Design & Engineering 2 |
| CECCACCI, Silvia | University of Macerata, Department of Education, Cultural Heritage and Tourism, Italy | Product Design & Engineering 2 Presenter |
| CEFALO, Massimo | Department of Electrical, Electronic and Robotic Engineering, Kingston University London, Roehampton Vale, London SW15 3DW | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| CERUTI, Alessandro | Department of Industrial Engineering (DIN), University of Bologna, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| CHERUBINI, Domenico | Universidad Católica San Antonio de Murcia, Murcia, Spain | Human Factors & Ergonomics 2 |
| CHIACCHIETTA, Cesare | Università degli Studi della Tuscia, Italy | Additive Manufacturing Presenter Design for Sustainability |
| CHILLEMI, Massimiliano | Department of Engineering, University of Messina, Messina, Italy | Methods For Medical Applications 2 Presenter |
| CIAMPI, Paola | Studio Arcadia Srl, Piombino, Italy | Human Factors & Ergonomics 1 |
| CICCARELLI, Marianna | Università Politecnica delle Marche, Italy | Human Factors & Ergonomics 1 Presenter Human Factors & Ergonomics 1 |
| CINCI, Pablo | Studio Arcadia Srl, Piombino, Italy | Human Factors & Ergonomics 1 |
| CIRELLO, Antonino | Università di Palermo, Italy; Università degli studi di Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Presenter Methods For Medical Applications 2 Methods For Medical Applications 2 |
| CLAGNAN, Andrea | Department of Engineering and Architecture, University of Trieste, Via Alfonso Valerio, 6/1, Trieste, 34127, Italy | Geometric Modeling & Processing |
| CLAPS, Vincenzo | Università degli Studi della Basilicata, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| COGO, Alessio Ruben | Università degli studi di Bologna, Italy | Extended Reality 1 |
| COGOTZI, Daniele | University of Modena and Reggio Emilia, Italy | Additive Manufacturing |
| COLALEO, Stefano | RO.GA. S.p.a.,Italy | Methods For Medical Applications 2 |
| COLELLA, Davide | Politecnico di Milano, School of Industrial and Information Engineering, Milan, 20133, Italy | Extended Reality 1 |
| COLOMBO, Giorgio | Politecnico di Milano | Methods for Medical Applications 1 Product Design & Engineering 1 Product Design & Engineering 1 Product Design & Engineering 1 |
| CONCHERI, Gianmaria | Laboratory of Design Methods and Tools in Industrial Engineering, Department of Civil, Environmental and Architectural Engineering, University of Padova, Via Venezia 1, 35131 Padova Italy | Geometric Modeling & Processing Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| CORRADINI, Enrico | Università Politecnica delle Marche, Italy | Human Factors & Ergonomics 1 |
| CORRENTI, Marco | Università di Palermo, Italy; Group of Bioengineering & Medical Devices, Ri.MED Foundation,Via Bandiera 11, 90133 Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| CRISTOFOLINI, Ilaria | University of Trento, Italy; Department of Industrial Engineering, University di Trento, Italy | Additive Manufacturing Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| CUCINOTTA, Filippo | Department of Engineering, University of Messina, Messina, Italy | Methods For Medical Applications 2 |
| CUILLIER, Claude | Airbus SAS, Toulouse | Product Design & Engineering 1 |
| CUOMO, Marco | University of Salerno, Italy | Human Factors & Ergonomics 2 Presenter |
| CUTRÌ, Chiara | University of Bergamo, Italy | Methods for Medical Applications 3 |
| D'AMICO, Stefano | Politecnico di Milano, School of Industrial and Information Engineering, Milan, 20133, Italy | Extended Reality 1 |
| D'ANGELO, Raffaele | INAIL CTSS | Human Factors & Ergonomics 2 |
| D'AVENIA, Andrea | Università Federico II Napoli, Italy; Universidad Católica San Antonio de Murcia, Murcia, Spain | Human Factors & Ergonomics 2 Presenter |
| DALLE MURA, Francesco | Università di Firenze, Italy; Department of Industrial Engineering, University of Florence, Florence, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods for Medical Applications 3 |
| DALPADULO, Enrico | University of Modena and Reggio Emilia, Italy | Additive Manufacturing Presenter Design for Sustainability Product Design & Engineering 3 + Design Methods for Marine Engineering |
| DASTAN, Mine | Department of Mechanics, Mathematics and Management, Polytecnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| DE CIANTIS, Rocco | Department of Industrial Engineering, University of Bologna, Italy | Human Factors & Ergonomics 2 |
| DE CRESCENZIO, Francesca | University of Bologna, Italy | Human Factors & Ergonomics 1 |
| DE GIGLIO, Vito | Department of Mechanics, Mathematics and Management, Polytechnic University of Bari, Italy | Extended Reality 2 + Engineering Education Presenter |
| DE LUCA, Marco | Meyer Simulation Center, Meyer Children’s Hospital IRCCS, Florence, Italy | Methods for Medical Applications 1 |
| DE SANTIS, Marella | University of Bologna, Italy | Product Design & Engineering 1 |
| DEL CURTO, Barbara | Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy; National Interuniversity Consortium for Materials Science and Technology (INSTM), Firenze, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| DI ANGELO, Luca | University of L'Aquila, Italy | Geometric Modeling & Processing |
| DI FILIPPO, Andrea | Department of Civil Engineering, University of Salerno, Fisciano, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| DI GIACOMO, Antonio | Università degli Studi della Basilicata, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Presenter |
| DI LEONARDO, Sofia | Group of Bioengineering & Medical Devices, Ri.MED Foundation,Via Bandiera 11, 90133 Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| DI MARTINO, Gianfranco | Electric Electronics and Computer Engineering Department, University of Catania, Via S.Sofia 64, 95125 Catania, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Presenter |
| DI MATTIA, Riccardo Luigi | Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, Via Brecce Bianche, 12, 60131 Ancona, Italy | Methods for Medical Applications 3 |
| DI MEO, Giovanni | Politecnico di Milano, School of Industrial and Information Engineering, Milan, 20133, Italy | Extended Reality 1 |
| DI STEFANO, Paolo | University of L'Aquila. Department of Industrial and Information Engineering and Economics. Heritechne. Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| DIANI, Andrea | Department of Industrial Engineering, Via Venezia 1, 35131, Padova, Italy | Geometric Modeling & Processing |
| DIDERO, Rachele | Faculty of Engineering, Free University of Bozen-Bolzano, Bozen-Bolzano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| DIEGO-TORTOSA, Didac | Institut de Ciències del Mar (ICM-CSIC), 08003 Barcelona, Spagna | Virtual Prototyping & Digital Twin |
| DIMAURO, Alessandro | “Enzo Ferrari” Department of Engineering, University of Modena and Reggio Emilia, Modena, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Presenter |
| DONETTI, Luca | Università degli Studi di Catania, Italy | Product Design & Engineering 2 Presenter |
| DONNICI, Giampiero | Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna; Alma Mater Studiorum University of Bologna, Italy | Additive Manufacturing Virtual Prototyping & Digital Twin |
| DOZIO, Nicolò | Politecnico di Milano, Department of Mechanical Engineering, Via Giuseppe La Masa, 1 - 20156 Milan, Italy; Department of Mechanical Engineering, Politecnico di Milano, Via Giuseppe La Masa, 1 - 20156 Milan, Italy | Extended Reality 1 Presenter Extended Reality 1 Extended Reality 1 |
| DRAGO, Manuel Fortunato | Department of Mechanical, Energy and Management Engineering (DIMEG), University of Calabria, P. Bucci 46C, 87036, Rende, Cosenza, Italy | Extended Reality 2 + Engineering Education |
| DUSINI, Luca | Ferrari S.p.A., Via Abetone Inferiore, 4 41053 Maranello, MO, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| ESPOSITO, Domenico | University of Naples Federico II, Italy | Additive Manufacturing Presenter |
| EVANGELISTA, Alessandro | Department of Mechanics, Mathematics and Management, Polytechnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| F. BLANCO, Teresa | Department of Applied Didactics, University of Santiago, Avda. Xoan XXIII, 15782 Santiago de Compostela, Spain | Geometric Modeling & Processing |
| FARRUGIA, Philip | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| FAVI, Claudio | Università degli Studi di Parma | Additive Manufacturing Extended Reality 1 Product Design & Engineering 1 |
| FERNANDEZ-LÓPEZ, Antia | Department of Applied Didactics, University of Santiago, Avda. Xoan XXIII, 15782 Santiago de Compostela, Spain | Geometric Modeling & Processing |
| FERRARI, Davide | University of Bergamo, Italy | Methods for Medical Applications 1 Presenter |
| FERRARIS, Silvia D. | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| FERRISE, Francesco | Politecnico di Milano, Department of Mechanical Engineering, Via Giuseppe La Masa, 1 - 20156 Milan, Italy | Extended Reality 1 Extended Reality 1 |
| FILIPPI, Stefano | Polytechnic Department of Engineering and Architecture, University of Udine, Udine, Italy | Extended Reality 2 + Engineering Education Product Design & Engineering 3 + Design Methods for Marine Engineering |
| FIORE, Michele | Universita' di Catania; STMicroelectronics | Geometric Modeling & Processing Presenter |
| FIORENTINO, Michele | Department of Mechanics, Mathematics and Management, Polytecnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| FLORE, Francesco | Department of Civil Engineering, University of Salerno, Fisciano, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| FONTANA, Carlotta | Department of Industrial Engineering; University of Salerno, Via Giovanni Paolo II, 132, 84084, Fisciano (SA), Italy; Department of Industrial Engineering, University of Salerno, Italy | Methods For Medical Applications 2 Virtual Prototyping & Digital Twin Presenter |
| FRANCIA, Daniela | Università degli studi di Bologna, Italy | Extended Reality 1 |
| FREDDI, Marco | Alma Mater Studiorum University of Bologna, Italy | Virtual Prototyping & Digital Twin |
| FRISOLI, Antonio | Scuola Superiore Sant'Anna, Italy | Virtual Prototyping & Digital Twin |
| FRIZZIERO, Leonardo | Alma Mater Studiorum University of Bologna, Italy | Virtual Prototyping & Digital Twin |
| FUMAGALLI, Michele | Design Department, Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter |
| FURFERI, Rocco | Department of Industrial Engineering of Florence, University of Florence,Via di S. Marta 3, 50139 Firenze, Italy; Università di Firenze, Italy | Geometric Modeling & Processing Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods for Medical Applications 3 |
| GALLOZZI, Simone | Università Politecnica delle Marche | Additive Manufacturing |
| GAMBELLI FENILI, Elisa | Università Politecnica delle Marche, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| GATTULLO, Michele | Department of Mechanics, Mathematics and Management, Polytecnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| GAUCI, Maria Victoria | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| GENUA, Alessandro | Scuola Superiore Sant'Anna, Italy | Virtual Prototyping & Digital Twin Presenter |
| GEORGIEV, Georgi | University of Oulu, Finland | Extended Reality 2 + Engineering Education |
| GERMANI, Michele | Università Politecnica delle Marche, Italy | Design for Sustainability Human Factors & Ergonomics 1 Human Factors & Ergonomics 1 |
| GHIDOTTI, Anna | University of Bergamo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods for Medical Applications 3 Presenter |
| GIAMMARINARO, Guido | University of Pisa, Italy | Additive Manufacturing |
| GIORI, Lorenzo Maria | Department of Mechanical Engineering, Politecnico di Milano, Via Giuseppe La Masa, 1 - 20156 Milan, Italy | Extended Reality 1 |
| GIOVANNETTI, Federica | University of Macerata, Department of Education, Cultural Heritage and Tourism, Italy | Product Design & Engineering 2 |
| GIULIANI, Francesca | University of Bologna, Italy | Product Design & Engineering 1 |
| GIUSSANI, Riccardo | Politecnico di Milano, Department of Mechanical Engineering, Via Giuseppe La Masa, 1 - 20156 Milan, Italy | Extended Reality 1 Extended Reality 1 Presenter |
| GIUSTI, Irene | University of Bologna, Italy | Product Design & Engineering 1 Presenter |
| GLORIA, Antonio | Department of Industrial Engineering, University of Naples Federico II, Naples, Italy | Extended Reality 2 + Engineering Education |
| GLORIA, Antonio | University of Naples Federico II, Italy | Additive Manufacturing |
| GOLLUSCIO, Edoardo Mariano | Università degli Studi della Basilicata, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| GOMES ARAUJO, Millene | University of Bologna, Italy | Human Factors & Ergonomics 1 Presenter |
| GOTI, Giulia | University of Pisa, Italy | Additive Manufacturing Presenter |
| GOVERNI, Lapo | Department of Industrial Engineering, University of Florence, Florence, Italy | Methods for Medical Applications 3 |
| GRANDI GELSOMINI, Fabio | Department of Industrial Engineering, University of Bologna, Italy | Human Factors & Ergonomics 2 Presenter |
| GRECH, Amy | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| GUARDIANI, Emanuele | University of L'Aquila. Department of Industrial and Information Engineering and Economics. Heritechne. Italy; University of L'Aquila, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter Geometric Modeling & Processing |
| HADJIONISIFORU, Onisiforos | Kinisiforo Ltd, Cyprus | Extended Reality 2 + Engineering Education |
| HU, Jessica | Department of Medical Sciences, University of Turin, Turin, 10126, Italy | Methods for Medical Applications 3 |
| IDRISSI, Abdelghani | Laboratori Nazionali del Sud, Via Santa Sofia 62 - 95123 Catania - Italy | Virtual Prototyping & Digital Twin |
| INGRASSIA, Tommaso | Università di Palermo, Italy; Università degli studi di Palermo, Italy; Department of Engineering, University of Palermo, Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods For Medical Applications 2 Methods For Medical Applications 2 Methods For Medical Applications 2 |
| INNOCENTE, Chiara | Department of Management and Production Engineering, Politecnico di Torino, TO 10129, Italy | Methods for Medical Applications 1 Presenter |
| IRANNEZHAD, Nima | Department of Industrial Engineering, Via Venezia 1, 35131, Padova, Italy | Geometric Modeling & Processing |
| JEDDI, Mohammad | University of Modena and Reggio Emilia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| KARGAR, Seyyed Masoud | Department of Mechanical, Energy, Management and Transportation Engineering (DIME), University of Genova, Italy | Product Design & Engineering 2 |
| KOLLIPARA, Hemanth | Department of Mechanical and Aerospace Engineering, Sapienza Università di Roma, via Eudossiana 18, 00184 Rome, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| KUMAR, Sarvpriya Raj | Politecnico di Milano, Italy; Dassault Systemes Italia SRL | Product Design & Engineering 1 Presenter |
| LABARTA LABRADOR, Martina | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter |
| LACINIATI, Edoardo | Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Presenter |
| LAGUDI, Antonio | University of Calabria, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Virtual Prototyping & Digital Twin |
| LANCIA, Maria Rosaria | Department of Basic and Applied Sciences for Engineering, Sapienza Università di Roma, Via A. Scarpa 16, 00161 Rome, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| LANDI, Daniele | Università degli studi di Bergamo, Italy; University of Bergamo, Viale Marconi 5, 24044 Dalmine, BG, Italy | Design for Sustainability Product Design & Engineering 1 |
| LANZOTTI, Antonio | Università degli studi di Napoli Federico II, Italy | Human Factors & Ergonomics 2 |
| LANZOTTI, Antonio | University of Naples Federico II, Italy; Università Federico II Napoli, Italy; Università degli Studi di Napoli Federico II, Italy | Additive Manufacturing Human Factors & Ergonomics 2 Virtual Prototyping & Digital Twin |
| LANZOTTI, Francesca Giovanna | Consorzio CREATE, Department of Industrial Engineering, University of Naples Federico II, via Claudio 21, 80125 Naples, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| LAUDANI, Giuseppe | Università degli Studi di Catania, Piazza Università, 2 - 95131 Catania - Italy | Virtual Prototyping & Digital Twin Presenter |
| LAVIOLA, Enricoadrea | Department of Mechanics, Mathematics and Management, Polytecnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| LEALI, Francesco | University of Modena and Reggio Emilia, Italy | Additive Manufacturing Design for Sustainability Product Design & Engineering 3 + Design Methods for Marine Engineering Product Design & Engineering 3 + Design Methods for Marine Engineering |
| LEVI, Rotem | Braude College of Engineering, Israel | Methods for Medical Applications 1 |
| LIU, Siqiang | Politecnico di Milano, Milano | Product Design & Engineering 1 |
| LIVERANI, Alfredo | Department of Industrial Engineering (DIN), University of Bologna, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Extended Reality 1 |
| LOIS-PRADOS, Cristina | Department of Applied Didactics, University of Santiago, Avda. Xoan XXIII, 15782 Santiago de Compostela, Spain | Geometric Modeling & Processing |
| LUBRANO, Paolo | Studio Arcadia Srl, Piombino, Italy | Human Factors & Ergonomics 1 |
| LUCANIA, Elena | Politecnico di Milano | Methods for Medical Applications 1 |
| LUPO, Giampiero | National Research Council of Italy (CNR), Institute of Applied Sciences and Intelligent Systems “Eduardo Caianiello”, Pozzuoli, Italy | Extended Reality 2 + Engineering Education |
| MA-EL-AININ, Mohammad Oussama | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| MACCARRONE, Paolo | Politecnico di Milano, Italy | Product Design & Engineering 2 |
| MACILLIS, Caterina | Politecnico di Milano, Milan, School of Industrial and Information Engineering, 20133, Italy | Extended Reality 1 |
| MAGNANI, Aurora | Department of Industrial Engineering of Florence, Via di S. Marta 3, 50139 Florence, Italy | Methods for Medical Applications 1 Presenter |
| MAGNANO, Sebastiano | Electric, Electronics and Computer Engineering Department, University of Catania, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Presenter |
| MALTAURO, Mattia | Laboratory of Design Methods and Tools in Industrial Engineering, Department of Civil, Environmental and Architectural Engineering, University of Padova, Via Venezia 1, 35131 Padova Italy;
Department of Industrial Engineering, Via Venezia 1, 35131, Padova, Italy; Department of Civil, Environmental and Architectural Engineering, University of Padova; Department of Industrial Engineering, University of Padova | Geometric Modeling & Processing Presenter Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| MAMBELLI, Alessandro | Università di Firenze, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Presenter |
| MANCA, Sandra | Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, Italian Workers’ Compensation Authority | Extended Reality 2 + Engineering Education |
| MANCUSO, Antonio | Università degli studi di Palermo, Italy | Methods For Medical Applications 2 |
| MANDOLINI, Marco | Università Politecnica delle Marche | Additive Manufacturing Methods for Medical Applications 3 |
| MANDORLI, Ferruccio | Università Politecnica delle Marche, Italy | Extended Reality 2 + Engineering Education Presenter |
| MANGHISI, Vito M. | Department of Mechanics, Mathematics and Management, Polytechnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| MANTEGNA, Giuseppe | Università degli Studi di Enna "KORE" | Methods For Medical Applications 2 |
| MARCONI, Marco | Università degli Studi della Tuscia, Italy | Additive Manufacturing Design for Sustainability |
| MARINELLI, Andrea | Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| MARINO, Emanuele | Department of Mechanical, Energy and Management Engineering (DIMEG), University of Calabria, P. Bucci 46C, 87036, Rende, Cosenza, Italy | Extended Reality 2 + Engineering Education |
| MARMOTTA, Lorenzo | Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna; Università degli studi di Bologna, Italy | Additive Manufacturing Extended Reality 1 |
| MARTORELLI, Massimo | University of Naples Federico II, Italy | Additive Manufacturing |
| MARULLO, Giorgia | Department of Management and Production Engineering, Politecnico di Torino, TO 10129, Italy; Politecnico di Torino, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 Methods for Medical Applications 3 Presenter |
| MARZOLA, Antonio | University of L'Aquila, Italy | Geometric Modeling & Processing Presenter |
| MARZULLO, Domenico | Department of Engineering and Architecture, University of Trieste, Piazzale Europa 1, 34127 Trieste, Italy; Department of Engineering and Architecture, University of Trieste, Via Alfonso Valerio, 6/1, Trieste, 34127, Italy | Additive Manufacturing Geometric Modeling & Processing |
| MASCITELLI, Giacomo | University of Bologna, Italy | Extended Reality 1 |
| MASOLINI, Matteo | Meyer Children's Hospital, IRCCS, VIale Gaetano Pieraccini 24, 50139, FLorence, Italy | Methods for Medical Applications 3 |
| MASSA, Francesca | Università degli studi di Napoli Federico II, Italy | Human Factors & Ergonomics 2 Presenter |
| MASSÈ, Alessandro | Department of Surgical Sciences, University of Turin, Turin, 10126, Italy | Methods for Medical Applications 3 |
| MATTA, Andrea | Politecnico di Milano, Italy | Product Design & Engineering 1 |
| MATTIOLI, Francesca | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| MAZZOLI, Alida | Department of Materials, Environmental Sciences and Urban Planning, Università Politecnica delle Marche, Via Brecce Bianche, 12, 60131 Ancona, Italy | Methods for Medical Applications 3 |
| MENCARELLI, Marta | Neuro-Oncology Unit, Meyer Children’s University Hospital, IRCCS, Florence, Italy | Methods for Medical Applications 1 Presenter |
| MENDES MAZZEI, Arthur | Universidade Federal de São Carlos, São Carlos 13565-905, Brazil | Additive Manufacturing |
| MENEGHELLO, Roberto | Department of Management and Engineering, University of Padova, Stradella San Nicola 3, 36100 Vicenza Italy | Geometric Modeling & Processing Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| MENGONI, Maura | Università Politecnica delle Marche, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| MERLO SOLOPA, Veaceslav | University of Milano-Bicocca, School of Medicine and Surgery, Italy | Methods for Medical Applications 3 |
| MESSINA, Maria Antonella | Università degli Studi di Enna "KORE" | Methods For Medical Applications 2 Presenter |
| MESSINA, Matteo | University of Palermo, Italy | Methods For Medical Applications 2 Presenter |
| MICALE, Giorgio | Università di Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| MICUCCI, Filippo Maria | Università Politecnica delle Marche, Italy | Human Factors & Ergonomics 1 |
| MIRULLA, Agostino Igor | University of Palermo, Italy; Department of Engineering, University of Palermo, Palermo, Italy | Methods For Medical Applications 2 Methods For Medical Applications 2 Presenter |
| MONACO, Fulvia Concetta Rita | Electric, Electronics and Computer Engineering Department, University of Catania, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| MONTALTI, Andrea | Department of Industrial Engineering, Alma Mater Studiorum - University of Bologna | Additive Manufacturing Presenter |
| MONTELEONE, Alessandra | Group of Bioengineering & Medical Devices, Ri.MED Foundation,Via Bandiera 11, 90133 Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| MOOS, Sandro | Department of Management and Production Engineering, Politecnico di Torino, TO 10129, Italy; Politecnico di Torino, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 Methods for Medical Applications 3 |
| MORO, Gloria | University of Bergamo, Italy | Human Factors & Ergonomics 1 Presenter |
| MOROSI, Federico | Department of Mechanical Engineering, Politecnico di Milano, Via Giuseppe La Masa, 1 - 20156 Milan, Italy | Extended Reality 1 Presenter |
| MORRESI, Nicole | Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, Via Brecce Bianche, 12, 60131 Ancona, Italy | Methods for Medical Applications 3 |
| MOSTACHETTI, Ivana | University of Bergamo, Italy | Methods for Medical Applications 3 Presenter |
| MOTTA, Martina | Design Department, Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| MOTYL, Barbara | Polytechnic Department of Engineering and Architecture, University of Udine, Udine, Italy | Extended Reality 2 + Engineering Education Presenter Product Design & Engineering 3 + Design Methods for Marine Engineering Presenter |
| MOZZILLO, Rocco | Università degli Studi della Basilicata, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| MURA, Matteo Benito | University of Modena and Reggio Emilia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| MUSSA, Federico | Department of Neurosurgery, Meyer Children’s Hospital IRCCS, Florence, Italy | Methods for Medical Applications 1 |
| MUZZUPAPPA, Maurizio | University of Calabria, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| NADDEO, Alessandro | University of Salerno, Italy | Human Factors & Ergonomics 2 |
| NERI, Paolo | Univrsity of Pisa, Italy | Extended Reality 2 + Engineering Education Presenter |
| OCCHIUTO, Enrico | Department of Engineering and Architecture, University of Trieste, Piazzale Europa 1, 34127 Trieste, Italy; Consorzio CREATE, Via Claudio 21, Napoli, 80125, Italy | Additive Manufacturing Geometric Modeling & Processing Presenter |
| OLDANI, Marco | Dassault Systemes Italia SRL | Product Design & Engineering 1 |
| PADERNO, Diego | Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| PAGLIARI, Curzio | University of Bologna, Italy | Extended Reality 1 Presenter |
| PANAROTTO, Massimo | Politecnico di Milano, Italy | Design for Sustainability |
| PAPA, Stefano | Università degli Studi Niccolò Cusano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| PAPALEO, Paola | Alma Mater Studiorum University of Bologna, Italy | Virtual Prototyping & Digital Twin Presenter |
| PAPETTI, Alessandra | Università Politecnica delle Marche, Italy | Human Factors & Ergonomics 1 |
| PAPILE, Flavia | Department of Chemistry, Materials and Chemical Engineering “Giulio Natta”, Politecnico di Milano, Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter |
| PASCOLETTI, Giulia | Department of Engineering, University of Perugia, 06125, Perugia, Italy | Additive Manufacturing |
| PAULOZZA, Monica | University of Macerata, Department of Education, Cultural Heritage and Tourism, Italy | Product Design & Engineering 2 |
| PELLICCIARI, Marcello | Università di Modena e Reggio Emilia, 42122 Reggio Emilia, Italy; Department of Sciences and Methods for Engineering, University of Modena and Reggio Emilia, Reggio Emilia, Italy. | Additive Manufacturing Product Design & Engineering 2 |
| PELOSIN, Edoardo | Department of Management and Production Engineering, Politecnico di Torino, TO 10129, Italy | Methods for Medical Applications 1 |
| PERINA, Matteo | Mimest S.r.l | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| PERRELLI, Francesco | Università degli Studi di Napoli Federico II, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design Presenter |
| PERUZZINI, Margherita | Department of Industrial Engineering (DIN), University of Bologna, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Human Factors & Ergonomics 2 |
| PESENTI, Debora | University of Bergamo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Presenter |
| PETYX, Marta | Department of Occupational and Environmental Medicine, Epidemiology and Hygiene, Italian Workers’ Compensation Authority | Extended Reality 2 + Engineering Education |
| PIANCASTELLI, Luca | University of Bologna, Italy | Product Design & Engineering 1 |
| PIAZZA, Cristina | TUM School of Computation, Information and Technology and Munich Institute of Robotics and Machine Intelligence (MIRMI), Technical University of Munich, 80333 Munich, Germany | Product Design & Engineering 2 |
| PIAZZOLLA, Pietro | Politecnico di Milano | Methods for Medical Applications 1 |
| PICCAMIGLIO, Lisa | University of Bergamo, Italy | Human Factors & Ergonomics 1 Presenter |
| PICCOTTI, Luca | Università Politecnica delle Marche, Italy | Design for Sustainability |
| PICERNO, Giuseppe | Manteco S.p.a. | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| PIERRI, Francesco | Università degli Studi della Basilicata, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 |
| PIETRONI, Gabriele | Politecnico di Milano, Milano | Product Design & Engineering 1 |
| PIETRONI, Giorgia | Università degli Studi della Tuscia, Italy | Design for Sustainability Presenter |
| PIGAZZI, Riccardo | Università degli Studi di Bergamo, Italy | Methods for Medical Applications 3 Presenter |
| PIGNONI, Giovanni | Alma Mater Studiorum University of Bologna, Italy | Virtual Prototyping & Digital Twin |
| PINI, Fabio | “Enzo Ferrari” Department of Engineering, University of Modena and Reggio Emilia, Modena, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| PITTORITTO, Marco | Metalmed s.r.l., Via Angelica Marcuzzi 2/5, 33034, Fagagna, Italy | Additive Manufacturing |
| POZZO, Giovanni | Mimest S.r.l | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| PRANZETTI, Lorenzo | University of Modena and Reggio Emilia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| PUGGELLI, Luca | Department of Industrial Engineering, University of Florence, 50139, Florence, Italy | Methods for Medical Applications 1 |
| PUGLIESE, Samuele | TrackOne Srl, Modena, Italy. | Product Design & Engineering 2 |
| PUGLIESE, Vincenzo | University of Calabria, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Presenter Virtual Prototyping & Digital Twin Presenter |
| PUGLISI, Angela Sara | Electric Electronics and Computer Engineering Department, University of Catania, Via S.Sofia 64, 95125 Catania, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| RAFFAELI, Roberto | Università di Modena e Reggio Emilia, 42122 Reggio Emilia, Italy | Additive Manufacturing Presenter |
| RAMIERI, Guglielmo | Department of Surgical Sciences, Università degli Studi di Torino, TO 10126, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 |
| RAVIZZA, Anna | Politecnico di Milano, Milan, School of Industrial and Information Engineering, 20133, Italy | Extended Reality 1 |
| REDAELLI, Edoardo Maria Alberto | Istituto Nazionale di Astrofisica, Osservatorio Astronomico di Brera, Merate, 23807, Italy | Extended Reality 1 |
| REGA, Andrea | Università degli Studi di Napoli Federico II, Italy | Virtual Prototyping & Digital Twin |
| REGAZZONI, Daniele | University of Bergamo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Human Factors & Ergonomics 1 Human Factors & Ergonomics 1 Methods for Medical Applications 1 Methods for Medical Applications 3 Methods for Medical Applications 3 |
| REGAZZONI, Daniele | Università degli Studi di Bergamo, Italy | Methods for Medical Applications 3 |
| RENNO, Fabrizio | Università degli Studi di Napoli Federico II, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| REZVANPOUR, Hamed | University of Modena and Reggio Emilia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| RICCOBENE, Giorgio | Laboratori Nazionali del Sud, Via Santa Sofia 62 - 95123 Catania - Italy | Virtual Prototyping & Digital Twin |
| RICOTTA, Vito | University of Palermo, Italy; Università degli studi di Palermo, Italy | Methods For Medical Applications 2 Methods For Medical Applications 2 |
| RIGAUD, Jonathan | Airbus UpNext, Toulouse | Product Design & Engineering 1 |
| RIGGI, Stefano | Politecnico di Milano, Milan, School of Industrial and Information Engineering, 20133, Italy | Extended Reality 1 |
| RIGGIO, Giovanni | Dassault Systemes Italia SRL | Product Design & Engineering 1 |
| RINO, Vincenzo | University of Calabria, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Virtual Prototyping & Digital Twin |
| RIZZI, Caterina | University of Bergamo, Italy; Università degli Studi di Bergamo, Italy | Human Factors & Ergonomics 1 Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods for Medical Applications 1 Methods for Medical Applications 3 Methods for Medical Applications 3 |
| RIZZIOLI, Rachele | Università degli studi di Parma, Italy | Extended Reality 1 Presenter Product Design & Engineering 1 Presenter |
| RODRÍGUEZ BLANCAS, José Luis | Department of Mathematics, University of Almería, 04120 Almería, Spain | Geometric Modeling & Processing |
| ROMAGNOLI, Sabia | Politecnico di Milano, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| ROMANELLI, Alessio | University of Florence, Department of Industrial Engineering, Via di Santa Marta 3, 50139, Florence, Italy | Methods for Medical Applications 3 Presenter |
| ROMOLI, Tommaso | Department of Industrial Engineering, University of Bologna, Italy | Human Factors & Ergonomics 2 |
| ROSSI, Marta | Università degli Studi eCampus, Italy | Design for Sustainability Presenter |
| ROSSONI, Marco | Politecnico di Milano, Italy | Product Design & Engineering 1 Product Design & Engineering 1 Presenter Product Design & Engineering 2 |
| ROTA CONTI, Sara | University of Milano-Bicocca, School of Medicine and Surgery, Italy | Methods for Medical Applications 3 |
| RUBINO, Samuele | University of Bologna, Italy | Extended Reality 1 |
| RUSSO, Davide | Università degli studi di Bergamo, Italy; University of Bergamo, Viale Marconi 5, 24044 Dalmine, BG, Italy | Design for Sustainability Product Design & Engineering 1 |
| RUSSO, Mario | University of Modena and Reggio Emilia, Italy | Design for Sustainability Presenter |
| SABBATINI, Matteo | Department of Electronics and Telecommunications, Politecnico di Torino, Corso Duca degli Abruzzi 24, Turin, 10129, Italy | Methods for Medical Applications 3 |
| SABBATINI, Sara | Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, Via Brecce Bianche, 12, 60131 Ancona, Italy | Methods for Medical Applications 3 |
| SABETTI, Emiliano | Vittoria Tyre S.p.A | Product Design & Engineering 1 |
| SALERNO, Federico | Politecnico di Torino, Italy | Methods for Medical Applications 1 Presenter |
| SANTI, Gian Maria | Università degli studi di Bologna, Italy | Extended Reality 1 Presenter |
| SAVIO, Gianpaolo | Department of Civil, Environmental and Architectural Engineering, University of Padova, Via Venezia 1, 35131 Padova, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| SCALICI, Tommaso | Università degli Studi di Enna "KORE" | Methods For Medical Applications 2 |
| SCALISE, Lorenzo | Department of Industrial Engineering and Mathematical Sciences, Università Politecnica delle Marche, Via Brecce Bianche, 12, 60131 Ancona, Italy | Methods for Medical Applications 3 |
| SCOGNAMIGLIO, Antonio | Department of Pharmacy, University of Salerno, Fisciano (SA), Italy | Human Factors & Ergonomics 2 |
| SCORZIELLO, Giovanni | Iperuranio R&S, University of Salerno, Fisciano (SA), Italy | Human Factors & Ergonomics 2 |
| SCOTTI, Nicola | Department of Surgical Sciences, Dental School of the University of Torino, 10126 Turin, Italy | Additive Manufacturing |
| SENA, Pasquale | Department of Industrial Engineering, University of Salerno, Fisciano (SA), Italy | Human Factors & Ergonomics 2 Presenter |
| SEQUENZIA, Gaetano | Universita' di Catania; Università degli Studi di Catania, Italy | Geometric Modeling & Processing Product Design & Engineering 2 |
| SERRA, Santo | Electric, Electronics and Computer Engineering Department, University of Catania, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| SERRATORE, Sara | Department of Mechanical, Energy and Management Engineering (DIMEG), University of Calabria, P. Bucci 46C, 87036, Rende, Cosenza, Italy | Extended Reality 2 + Engineering Education Presenter |
| SERVI, Michaela | Università di Firenze, Italy; Department of Industrial Engineering of Florence, Via di S. Marta 3, 50139 Florence, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods for Medical Applications 1 Methods for Medical Applications 3 Methods for Medical Applications 3 |
| SEVERI, Francesco | Meyer Simulation Center, Meyer Children’s Hospital IRCCS, Florence, Italy | Methods for Medical Applications 1 |
| SFRAVARA, Felice | Department of Engineering, University of Messina, Messina, Italy | Methods For Medical Applications 2 |
| SHIKI, Sidney Bruce | Universidade Federal de São Carlos, São Carlos 13565-905, Brazil | Additive Manufacturing |
| SITTA, Alessandro | STMicroelectronics | Geometric Modeling & Processing |
| SOLAZZI, Massimiliano | Scuola Superiore Sant'Anna, Italy | Virtual Prototyping & Digital Twin |
| SOOMRO, Sohail Ahmed | University of Oulu, Finland | Extended Reality 2 + Engineering Education |
| SPREAFICO, Christian | Università degli studi di Bergamo, Italy; University of Bergamo, Viale Marconi 5, 24044 Dalmine, BG, Italy | Design for Sustainability Presenter Product Design & Engineering 1 |
| STANZIONE, Gina | VISHAY Semiconductor Italiana S.P.A., Italy | Product Design & Engineering 2 |
| STEFANONE, Alessandro | Politecnico di Milano, Italy | Product Design & Engineering 1 Presenter |
| TAMBURRINO, Francesco | University of Pisa, Italy; Univrsity of Pisa, Italy | Additive Manufacturing Extended Reality 2 + Engineering Education |
| TANTILLO, Micol | Università di Palermo, Italy; Università degli studi di Palermo, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods For Medical Applications 2 Methods For Medical Applications 2 Presenter |
| TARALLO, Andrea | Università degli studi di Napoli Federico II, Italy | Human Factors & Ergonomics 2 |
| TELLONI, Agnese Ilaria | University of Macerata, Department of Education, Cultural Heritage and Tourism, Italy | Product Design & Engineering 2 |
| TORZINI, Lorenzo | Department of Industrial Engineering, University of Florence, 50139, Florence, Italy | Methods for Medical Applications 1 |
| TRIPODI, Arianna | Department of Industrial Engineering, University of Florence, Florence, Italy | Methods for Medical Applications 3 |
| TUMINO, Davide | Università degli Studi di Enna "KORE" | Methods For Medical Applications 2 |
| TUMMINIA, Alessandro | VISHAY Semiconductor Italiana S.P.A., Italy | Product Design & Engineering 2 |
| TURCO, Gianluca | Department of Medical Sciences, University of Trieste, Piazza dell’Ospitale 1, 34125 Tries-te, Italy | Additive Manufacturing |
| TZEPKENLIS, Anastasios | Scuola Superiore Sant'Anna, Italy | Virtual Prototyping & Digital Twin |
| UBERTI, Stefano | Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering |
| UCCHEDDU, Francesca | Department of Industrial Engineering, University of Padova, Via Venezia 1, 35131 Padova, Italy | Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection |
| ULRICH, Luca | Department of Management and Production Engineering, Politecnico di Torino, TO 10129, Italy; Politecnico di Torino, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 Methods for Medical Applications 3 |
| ULUTAS, Berna | Eskisehir Osmangazi University, Turkey (Türkiye) | Human Factors & Ergonomics 1 Presenter |
| UVA, Antonio E. | Department of Mechanics, Mathematics and Management, Polytechnic University of Bari, Italy | Extended Reality 2 + Engineering Education |
| VAGLIO, Emanuele | Polytechnic Department of Engineering and Architecture, University of Udine, via delle Scienze 208, 33100 Udine, Italy | Additive Manufacturing |
| VALENTE, Daniele | Department of Engineering and Architecture, University of Trieste, Via Alfonso Valerio, 6/1, Trieste, 34127, Italy | Geometric Modeling & Processing |
| VALENTI, Andrea | Department of Engineering, University of Palermo, Palermo, Italy | Methods For Medical Applications 2 |
| VALSECCHI, Alessandra | University of Bergamo, Italy | Human Factors & Ergonomics 1 |
| VARGIU, Massimiliano | Department of Engineering and Architecture, University of Trieste, Piazzale Europa 1, 34127 Trieste, Italy | Additive Manufacturing Presenter |
| VEERARAGHAVAN, Aniruddhan | Politecnico di Milano, Italy | Design for Sustainability |
| VELLA, Luigi | Università Politecnica delle Marche, Italy | AI Methods for Engineering Design + Digital Transformation in Product Development: Emerging Technologies Between Engineering & Design |
| VELLA, Pierre | University of Malta, Malta | Extended Reality 2 + Engineering Education |
| VERGNANO, Alberto | University of Modena and Reggio Emilia, Italy | Product Design & Engineering 3 + Design Methods for Marine Engineering Presenter |
| VEZZETTI, Enrico | Department of Management and Production Engineering, Politecnico di Torino, TO 10129, Italy; Politecnico di Torino, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 Methods for Medical Applications 3 |
| VILLA, Valerio | University of Brescia, Department of Mechanical and Industrial Engineering, Italy; Department of Mechanical and Industrial Engineering, University of Brescia, Brescia, Italy | Product Design & Engineering 2 Product Design & Engineering 3 + Design Methods for Marine Engineering |
| VILLECCO, Francesco | Department of Industrial Engineering, University of Salerno, Fisciano, Italy | 3D Scanning + 3D Technologies for Cultural Heritages + Virtual Prototyping & Digital Twin 2 Presenter Human Factors & Ergonomics 2 |
| VIOLA, Salvatore | Laboratori Nazionali del Sud, Via Santa Sofia 62 - 95123 Catania - Italy | Virtual Prototyping & Digital Twin |
| VITALI, Andrea | University of Bergamo, Italy; Università degli Studi di Bergamo, Italy | Human Factors & Ergonomics 1 Human Factors & Ergonomics 1 Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Methods for Medical Applications 1 Methods for Medical Applications 3 Methods for Medical Applications 3 |
| VOLPE, Yary | Department of Industrial Engineering of Florence, Via di S. Marta 3, 50139 Florence, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 Methods for Medical Applications 3 |
| VON WUNSTER, Guia | Politecnico di Milano, Italy | Product Design & Engineering 2 |
| WEISS COHEN, Miri | Braude College of Engineering, Israel | Methods for Medical Applications 1 Presenter |
| WODEHOUSE, Andrew | University of Strathclyde, United Kingdom | Extended Reality 2 + Engineering Education |
| YAVARI, Mona | Department of Mechanics, Mathematics and Management, Polytecnic University of Bari, Italy | Extended Reality 2 + Engineering Education Presenter |
| ZAGO, Marco | University of Trento, Italy; Department of Industrial Engineering, University di Trento, Italy | Additive Manufacturing Image Processing & Applications + Geometric Dimensioning, Tolerancing & Inspection Presenter |
| ZANETTI, Elisabetta M. | Department of Engineering, University of Perugia, 06125, Perugia, Italy | Additive Manufacturing |
| ZAVATTERO, Emanuele | Department of Surgical Sciences, Università degli Studi di Torino, TO 10126, Italy | Methods for Medical Applications 1 Methods for Medical Applications 1 |
| ZHANG, Xiaoqian | Department of Mechanical Engineering, University of Genoa, 16145 Genoa, Italy; TUM School of Computation, Information and Technology and Munich Institute of Robotics and Machine Intelligence (MIRMI), Technical University of Munich, 80333 Munich, Germany | Product Design & Engineering 2 Presenter |